Top Suppliers Pn16 Dual Plate Wafer Check Valve - AH Series Dual plate wafer check valve – TWS Valve

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

, , ,
Top Suppliers Pn16 Dual Plate Wafer Check Valve - AH Series Dual plate wafer check valve – TWS Valve Detail:

Description:

Material list:

No. Part Material
AH      EH BH MH
1 Body CI DI WCB CF8 CF8M C95400 CI DI WCB CF8 CF8M C95400 WCB CF8 CF8M C95400
2 Seat NBR EPDM VITON etc. DI Covered Rubber NBR EPDM VITON etc.
3 Disc DI C95400 CF8 CF8M DI C95400 CF8 CF8M WCB CF8 CF8M C95400
4 Stem 416/304/316 304/316 WCB CF8 CF8M C95400
5 Spring 316 ……

Feature:

Fasten Screw:
Effectively prenvent the shaft from traveling,prevent valve work from failing and end from leaking.
Body:
Short face to face and good rigidity.
Rubber Seat:
Vulcanized on body,tight fit and tight seat with no leakage.
Springs:
Dual springs distribute the load force evenly across each plate,ensuring quick shut off in back flow.
Disc:
Adopting unitized design of dual dics and two torsion springs,the disc closes quikly and removes water-hammer.
Gasket:
It adjusts fit-up gap and assures disc seal performance.

Dimensions:

"

Size D D1 D2 L R t Weight(kg)
(mm) (inch)
50 2″ 105(4.134) 65(2.559) 32.18(1.26) 54(2.12) 29.73(1.17) 25(0.984) 2.8
65 2.5″ 124(4.882) 78(3) 42.31(1.666) 60(2.38) 36.14(1.423) 29.3(1.154) 3
80 3″ 137(5.39) 94(3.7) 66.87(2.633) 67(2.62) 43.42(1.709) 27.7(1.091) 3.8
100 4″ 175(6.89) 117(4.6) 97.68(3.846) 67(2.62) 55.66(2.191) 26.7(1.051) 5.5
125 5″ 187(7.362) 145(5.709) 111.19(4.378) 83(3.25) 67.68(2.665) 38.6(1.52) 7.4
150 6″ 222(8.74) 171(6.732) 127.13(5) 95(3.75) 78.64(3.096) 46.3(1.8) 10.9
200 8″ 279(10.984) 222(8.74) 161.8(6.370) 127(5) 102.5(4.035) 66(2.59) 22.5
250 10″ 340(13.386) 276(10.866) 213.8(8.49) 140(5.5) 126(4.961) 70.7(2.783) 36
300 12″ 410(16.142) 327(12.874) 237.9(9.366) 181(7.12) 154(6.063) 102(4.016) 54
350 14″ 451(17.756) 375(14.764) 312.5(12.303) 184(7.25) 179.9(7.083) 89.2(3.512) 80
400 16″ 514(20.236) 416(16.378) 351(13.819) 191(7.5) 198.4(7.811) 92.5(3.642) 116
450 18″ 549(21.614) 467(18.386) 409.4(16.118) 203(8) 226.2(8.906) 96.2(3.787) 138
500 20″ 606(23.858) 514(20.236) 451.9(17.791) 213(8.374) 248.2(9.72) 102.7(4.043) 175
600 24″ 718(28.268) 616(24.252) 554.7(21.839) 222(8.75) 297.4(11.709) 107.3(4.224) 239
750 30″ 884(34.8) 772(30.39) 685.2(26.976) 305(12) 374(14.724) 150(5.905) 659

Product detail pictures:

Top Suppliers Pn16 Dual Plate Wafer Check Valve - AH Series Dual plate wafer check valve – TWS Valve detail pictures


Related Product Guide:

Top Suppliers Pn16 Dual Plate Wafer Check Valve - AH Series Dual plate wafer check valve – TWS Valve , The product will supply to all over the world, such as: , , ,

  • 5 Stars By from -

    5 Stars By from -
    Write your message here and send it to us

    Related products

    • OEM/ODM Supplier Vag Butterfly Valve - BD Series Wafer butterfly valve – TWS Valve

      OEM/ODM Supplier Vag Butterfly Valve - BD Seri...

      Description: BD Series wafer butterfly valve can be used as a device to cut-off or regulate the flow in various medium pipes. Through selecting different  materials of disc and seal seat, as well as the pinless connection between disc and stem,the valve can be applied to worse conditions, such as desulphurization vacuum, sea water desalinization. Characteristic: 1. Small in size&light in weight and easy maintenance. It can be mounted wherever needed.2. Simple, compact structure, quick 90 ...

    • Well-designed Worm Gear For Butterfly Valve - UD Series hard-seated butterfly valve – TWS Valve

      Well-designed Worm Gear For Butterfly Valve - ...

      Description: UD Series hard seated butterfly valve is Wafer pattern with flanges ,the face to face is EN558-1 20 series as wafer type. Material of Main Parts: Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Characteristics: 1.Correcting holes are made on flange according to standard, easy correcting during the installation...

    • 100% Original Factory Butterfly Valve Dn250 - UD Series soft sleeve seated butterfly valve – TWS Valve

      100% Original Factory Butterfly Valve Dn250 - ...

      UD Series soft sleeve seated butterfly valve is Wafer pattern with flanges ,the face to face is EN558-1 20 series as wafer type. Characteristics: 1.Correcting holes are made on flange according to standard, easy correcting during the installation. 2.Through-out bolt or one-side bolt used. Easy replacing and maintenance. 3.The soft sleeve seat can isolate the body from media. Product operation instruction 1. Pipe flange standards should conform to butterfly valve standards; suggest using weldi...

    • Good User Reputation for Middle Line Butterfly Valve - DL Series flanged concentric butterfly valve – TWS Valve

      Good User Reputation for Middle Line Butterfly ...

      Description: DL Series flanged concentric butterfly valve is with centric disc and bonded liner,and have all same common features of other wafer/lug series,these valves are featured by a higher strength of the body and better resistance to pipe pressures as safey factor. Having all same common features of the univisal series, these valves are featured by a higher strength of the body and better resistance to pipe pressures as safety factor.  Characteristic: 1. Short Length pattern design 2. V...

    • Factory Cheap Hot Y Strainer For Water - TWS Flanged Y Strainer According to ANSI B16.10 – TWS Valve

      Factory Cheap Hot Y Strainer For Water - TWS F...

      Description: Y strainers mechanically remove solids from flowing steam, gases or liquid piping systems with the use of a perforated or wire mesh straining screen, and are used to protect equipment. From a simple low pressure cast iron threaded strainer to a large, high pressure special alloy unit with a custom cap design. Material list:  Parts Material Body Cast iron Bonnet Cast iron Filtering net Stainless steel Feature: Unlike other types of strainers, a Y-Strainer has the advan...

    • Super Purchasing for Flange Lug Wafer Butterfly Valve - UD Series hard-seated butterfly valve – TWS Valve

      Super Purchasing for Flange Lug Wafer Butterfly...

      Description: UD Series hard seated butterfly valve is Wafer pattern with flanges ,the face to face is EN558-1 20 series as wafer type. Material of Main Parts: Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Characteristics: 1.Correcting holes are made on flange according to standard, easy correcting during the installation...