Professional China Ss316 Check Valve - EH Series Dual plate wafer check valve – TWS Valve
Professional China Ss316 Check Valve - EH Series Dual plate wafer check valve – TWS Valve Detail:
Description:
EH Series Dual plate wafer check valve is with two torsion springs added to each of pair valve plates, which close the plates quickly and automatically, that can prevent the medium from flowing back.The check valve can be installed on both horizontal and vertical direction pipelines.
Characteristic:
-Small in size, light in weight, compact in sturcture, easy in maintenance.
-Two torsion springs are added to each of the pair valve plates, which close the plates quickly and automatically.
-The Quick cloth action preventsthe medium from flowing back.
-Short face to face and good rigidity.
-Easy installation, it can be installed on both horizontal and vertival direction pipelines.
-This valve is tighly sealed, without leakage under the water pressure test.
-Safe and reliable in operation, High interference-resistance.
Applications:
General industrial use.
Dimensions:
| Size | D | D1 | D2 | L | R | t | Weight(kg) | |
| (mm) | (inch) | |||||||
| 40 | 1.5″ | 92 | 65 | 43.3 | 43 | 28.8 | 19 | 1.5 |
| 50 | 2″ | 107 | 65 | 43.3 | 43 | 28.8 | 19 | 1.5 |
| 65 | 2.5″ | 127 | 80 | 60.2 | 46 | 36.1 | 20 | 2.4 |
| 80 | 3″ | 142 | 94 | 66.4 | 64 | 43.4 | 28 | 3.6 |
| 100 | 4″ | 162 | 117 | 90.8 | 64 | 52.8 | 27 | 5.7 |
| 125 | 5″ | 192 | 145 | 116.9 | 70 | 65.7 | 30 | 7.3 |
| 150 | 6″ | 218 | 170 | 144.6 | 76 | 78.6 | 31 | 9 |
| 200 | 8″ | 273 | 224 | 198.2 | 89 | 104.4 | 33 | 17 |
| 250 | 10″ | 328 | 265 | 233.7 | 114 | 127 | 50 | 26 |
| 300 | 12″ | 378 | 310 | 283.9 | 114 | 148.3 | 43 | 42 |
| 350 | 14″ | 438 | 360 | 332.9 | 127 | 172.4 | 45 | 55 |
| 400 | 16″ | 489 | 410 | 381 | 140 | 197.4 | 52 | 75 |
| 450 | 18″ | 539 | 450 | 419.9 | 152 | 217.8 | 58 | 101 |
| 500 | 20″ | 594 | 505 | 467.8 | 152 | 241 | 58 | 111 |
| 600 | 24″ | 690 | 624 | 572.6 | 178 | 295.4 | 73 | 172 |
| 700 | 28″ | 800 | 720 | 680 | 229 | 354 | 98 | 219 |
Product detail pictures:
Related Product Guide:
Professional China Ss316 Check Valve - EH Series Dual plate wafer check valve – TWS Valve , The product will supply to all over the world, such as: , , ,
By from -
By from -
Related products
-
Renewable Design for Extension Stem Butterfly V...
Description: Comparing to our YD series,flange connection of MD Series wafer butterfly valve is specific,the handle is malleable iron. Working Temperature: •-45℃ to +135℃ for EPDM liner • -12℃ to +82℃ for NBR liner • +10℃ to +150℃ for PTFE liner Material of Main Parts: Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Dimen...
-
Cheapest Factory Vulcanized Seat Butterfly Valv...
UD Series soft sleeve seated butterfly valve is Wafer pattern with flanges ,the face to face is EN558-1 20 series as wafer type. Characteristics: 1.Correcting holes are made on flange according to standard, easy correcting during the installation. 2.Through-out bolt or one-side bolt used. Easy replacing and maintenance. 3.The soft sleeve seat can isolate the body from media. Product operation instruction 1. Pipe flange standards should conform to butterfly valve standards; suggest using weldi...
-
Factory source Vamein Butterfly Valve - DC Ser...
Description: DC Series flanged eccentric butterfly valve incorporates a positive retained resilient disc seal and either an integral body seat. The valve has three unique attributes: less weight, more strength and lower torque. Characteristic: 1. Eccentric action reduces torque and seat contact during operation extending valve life 2. Suitable for on/off and modulating service. 3. Subject to size and damage, the seat can be repaired in the field and in certain cases, repaired from outside the...
-
New Fashion Design for Pneumatic Di Butterfly V...
Description: DC Series flanged eccentric butterfly valve incorporates a positive retained resilient disc seal and either an integral body seat. The valve has three unique attributes: less weight, more strength and lower torque. Characteristic: 1. Eccentric action reduces torque and seat contact during operation extending valve life 2. Suitable for on/off and modulating service. 3. Subject to size and damage, the seat can be repaired in the field and in certain cases, repaired from outside the...
-
Best-Selling Rubber Lined Butterfly Valve - MD...
Description: Comparing to our YD series,flange connection of MD Series wafer butterfly valve is specific,the handle is malleable iron. Working Temperature: •-45℃ to +135℃ for EPDM liner • -12℃ to +82℃ for NBR liner • +10℃ to +150℃ for PTFE liner Material of Main Parts: Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Dimens...
-
Manufactur standard Two Piece Body Butterfly Va...
Description: GD Series grooved end butterfly valve is a grooved end bubble tight shutoff butterfly valve with outstanding flow characteristics. The rubber seal is molded onto the ductile iron disc, in order to allow for maximum flow potential. It offers economical, efficient, and reliable service for grooved end piping applications. It is easily installed with two grooved end couplings. Typical application: HVAC, filtering system, etc. Dimensions: Size A B D D1 D2 L H E ...
