PriceList for Wafer Type Check Valve - AH Series Dual plate wafer check valve – TWS Valve
PriceList for Wafer Type Check Valve - AH Series Dual plate wafer check valve – TWS Valve Detail:
Description:
Material list:
| No. | Part | Material | ||
| AH EH | BH | MH | ||
| 1 | Body | CI DI WCB CF8 CF8M C95400 | CI DI WCB CF8 CF8M C95400 | WCB CF8 CF8M C95400 |
| 2 | Seat | NBR EPDM VITON etc. | DI Covered Rubber | NBR EPDM VITON etc. |
| 3 | Disc | DI C95400 CF8 CF8M | DI C95400 CF8 CF8M | WCB CF8 CF8M C95400 |
| 4 | Stem | 416/304/316 | 304/316 | WCB CF8 CF8M C95400 |
| 5 | Spring | 316 | …… | |
Feature:
Fasten Screw:
Effectively prenvent the shaft from traveling,prevent valve work from failing and end from leaking.
Body:
Short face to face and good rigidity.
Rubber Seat:
Vulcanized on body,tight fit and tight seat with no leakage.
Springs:
Dual springs distribute the load force evenly across each plate,ensuring quick shut off in back flow.
Disc:
Adopting unitized design of dual dics and two torsion springs,the disc closes quikly and removes water-hammer.
Gasket:
It adjusts fit-up gap and assures disc seal performance.
Dimensions:
| Size | D | D1 | D2 | L | R | t | Weight(kg) | |
| (mm) | (inch) | |||||||
| 50 | 2″ | 105(4.134) | 65(2.559) | 32.18(1.26) | 54(2.12) | 29.73(1.17) | 25(0.984) | 2.8 |
| 65 | 2.5″ | 124(4.882) | 78(3) | 42.31(1.666) | 60(2.38) | 36.14(1.423) | 29.3(1.154) | 3 |
| 80 | 3″ | 137(5.39) | 94(3.7) | 66.87(2.633) | 67(2.62) | 43.42(1.709) | 27.7(1.091) | 3.8 |
| 100 | 4″ | 175(6.89) | 117(4.6) | 97.68(3.846) | 67(2.62) | 55.66(2.191) | 26.7(1.051) | 5.5 |
| 125 | 5″ | 187(7.362) | 145(5.709) | 111.19(4.378) | 83(3.25) | 67.68(2.665) | 38.6(1.52) | 7.4 |
| 150 | 6″ | 222(8.74) | 171(6.732) | 127.13(5) | 95(3.75) | 78.64(3.096) | 46.3(1.8) | 10.9 |
| 200 | 8″ | 279(10.984) | 222(8.74) | 161.8(6.370) | 127(5) | 102.5(4.035) | 66(2.59) | 22.5 |
| 250 | 10″ | 340(13.386) | 276(10.866) | 213.8(8.49) | 140(5.5) | 126(4.961) | 70.7(2.783) | 36 |
| 300 | 12″ | 410(16.142) | 327(12.874) | 237.9(9.366) | 181(7.12) | 154(6.063) | 102(4.016) | 54 |
| 350 | 14″ | 451(17.756) | 375(14.764) | 312.5(12.303) | 184(7.25) | 179.9(7.083) | 89.2(3.512) | 80 |
| 400 | 16″ | 514(20.236) | 416(16.378) | 351(13.819) | 191(7.5) | 198.4(7.811) | 92.5(3.642) | 116 |
| 450 | 18″ | 549(21.614) | 467(18.386) | 409.4(16.118) | 203(8) | 226.2(8.906) | 96.2(3.787) | 138 |
| 500 | 20″ | 606(23.858) | 514(20.236) | 451.9(17.791) | 213(8.374) | 248.2(9.72) | 102.7(4.043) | 175 |
| 600 | 24″ | 718(28.268) | 616(24.252) | 554.7(21.839) | 222(8.75) | 297.4(11.709) | 107.3(4.224) | 239 |
| 750 | 30″ | 884(34.8) | 772(30.39) | 685.2(26.976) | 305(12) | 374(14.724) | 150(5.905) | 659 |
Product detail pictures:
Related Product Guide:
PriceList for Wafer Type Check Valve - AH Series Dual plate wafer check valve – TWS Valve , The product will supply to all over the world, such as: , , ,
By from -
By from -
Related products
-
Big Discount Ansi Butterfly Valve - ED Series ...
Description: ED Series Wafer butterfly valve is soft sleeve type and can separate the body and fluid medium exactly,. Material of Main Parts: Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Seat Specification: Material Temperature Use Description NBR -23℃ ~ 82℃ Buna-NBR:(Nitrile Butadiene Rubber ) has good tensile st...
-
Factory wholesale Renewable Seat Gate Valve - ...
Description: WZ Series Metal seated OS&Y gate valve use a ductile iron gate that houses bronze rings to ensure a watertight seal. The OS&Y (Outside Screw and Yoke) gate valve is mainly used in fire protection sprinkler systems. The main difference from a standard NRS (Non Rising Stem) gate valve is that the stem and stem nut are placed outside the valve body. This makes it easy to see if the valve is open or closed, as almost the entire length of the stem is visible when the valve is ...
-
Renewable Design for 316l Butterfly Valve - UD...
Description: UD Series hard seated butterfly valve is Wafer pattern with flanges ,the face to face is EN558-1 20 series as wafer type. Material of Main Parts: Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Characteristics: 1.Correcting holes are made on flange according to standard, easy correcting during the installation...
-
Factory Outlets Cast Steel Stainless Steel Valv...
Description: BD Series wafer butterfly valve can be used as a device to cut-off or regulate the flow in various medium pipes. Through selecting different materials of disc and seal seat, as well as the pinless connection between disc and stem,the valve can be applied to worse conditions, such as desulphurization vacuum, sea water desalinization. Characteristic: 1. Small in size&light in weight and easy maintenance. It can be mounted wherever needed.2. Simple, compact structure, quick 90 ...
-
Factory best selling Bare Shaft Rubber Seated B...
Description: GD Series grooved end butterfly valve is a grooved end bubble tight shutoff butterfly valve with outstanding flow characteristics. The rubber seal is molded onto the ductile iron disc, in order to allow for maximum flow potential. It offers economical, efficient, and reliable service for grooved end piping applications. It is easily installed with two grooved end couplings. Typical application: HVAC, filtering system, etc. Dimensions: Size A B D D1 D2 L H E ...
-
OEM/ODM China Industrial Check Valve - RH Seri...
Description: RH Series Rubber seated swing check valve is simple, durable and exhibits improved design features over that of traditional metal-seated swing check valves. The disc and shaft are fully encapsulated with EPDM rubber to create the valve’s only moving part Characteristic: 1. Small in size&light in weight and easy maintenance. It can be mounted wherever needed. 2. Simple, compact structure, quick 90 degree on-off operation 3. Disc has two-way bearing, perfect seal, without leaka...
