Personlized Products Single Flange Butterfly Valve - ED Series Wafer butterfly valve – TWS Valve

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

, , ,
Personlized Products Single Flange Butterfly Valve - ED Series Wafer butterfly valve – TWS Valve Detail:

Description:

ED Series Wafer butterfly valve is soft sleeve type and can separate the body and fluid medium exactly,.

Material of Main Parts: 

Parts Material
Body CI,DI,WCB,ALB,CF8,CF8M
Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel
Stem SS416,SS420,SS431,17-4PH
Seat NBR,EPDM,Viton,PTFE
Taper Pin SS416,SS420,SS431,17-4PH

Seat Specification:

Material Temperature Use Description
NBR -23℃ ~ 82℃ Buna-NBR:(Nitrile Butadiene Rubber ) has good tensile strength and resistance to abrasion.It is also resistant to hydrocarbon products.It is a good general-service material for use in water,vacuum,acid,salts,alkalines,fats,oils,greases,hydraulic oils and ethylene glycol. Buna-N can not use for acetone,ketones and nitrated or chlorinated hydrocarbons.
Shot time-23℃ ~120℃
EPDM -20 ℃~130℃ General EPDM rubber: is a good general-service synthetic rubber used in hot-water, drinks, milk product systems and those containing ketones, alcohol, nitric ether esters and glycerol. But EPDM can not use for hydrocarbon based oils, minerals or solvents.
Shot time-30℃ ~ 150℃
Viton -10 ℃~ 180℃ Viton is a fluorinated hydrocarbon elastomer with excellent resistance to most hydrocarbon oils and gases and other petroleum-based products. Viton can not use for steam service, hot water over 82℃ or concentrated alkalines.
PTFE -5℃ ~ 110℃ PTFE has good chemical performance stability and surface will be not sticky.At the same time, it has good lubricity property and aging resistance. It is a good material for use in acids, alkalis, oxidant and other corrodents.
(Inner liner EDPM)
PTFE -5℃~90℃
(Inner liner NBR)

Operation:lever,gearbox,electrical actuator,pneumatic actuator.

Characteristics:

1.Stem head design of Double “D” or Square cross:Convenient to connect with various actuators,deliver more torque;

2.Two piece stem square driver:No-space connection applies to any poor conditions;

3.Body without Frame structure:The seat can separate the body and fluid medium exactly,and convenient with pipe flange.

Dimension:

20210927171813


Product detail pictures:

Personlized Products Single Flange Butterfly Valve - ED Series Wafer butterfly valve – TWS Valve detail pictures


Related Product Guide:

Personlized Products Single Flange Butterfly Valve - ED Series Wafer butterfly valve – TWS Valve , The product will supply to all over the world, such as: , , ,

  • 5 Stars By from -

    5 Stars By from -
    Write your message here and send it to us

    Related products

    • Massive Selection for Flange Lug Wafer Butterfly - BD Series Wafer butterfly valve – TWS Valve

      Massive Selection for Flange Lug Wafer Butterfl...

      Description: BD Series wafer butterfly valve can be used as a device to cut-off or regulate the flow in various medium pipes. Through selecting different  materials of disc and seal seat, as well as the pinless connection between disc and stem,the valve can be applied to worse conditions, such as desulphurization vacuum, sea water desalinization. Characteristic: 1. Small in size&light in weight and easy maintenance. It can be mounted wherever needed.2. Simple, compact structure, quick 90 ...

    • Massive Selection for Flange Lug Wafer Butterfly - UD Series hard-seated butterfly valve – TWS Valve

      Massive Selection for Flange Lug Wafer Butterfl...

      Description: UD Series hard seated butterfly valve is Wafer pattern with flanges ,the face to face is EN558-1 20 series as wafer type. Material of Main Parts: Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Characteristics: 1.Correcting holes are made on flange according to standard, easy correcting during the installation...

    • Factory made hot-sale Grooved Butterfly Valve - DC Series flanged eccentric butterfly valve – TWS Valve

      Factory made hot-sale Grooved Butterfly Valve -...

      Description: DC Series flanged eccentric butterfly valve incorporates a positive retained resilient disc seal and either an integral body seat. The valve has three unique attributes: less weight, more strength and lower torque. Characteristic: 1. Eccentric action reduces torque and seat contact during operation extending valve life 2. Suitable for on/off and modulating service. 3. Subject to size and damage, the seat can be repaired in the field and in certain cases, repaired from outside the...

    • High definition Knife Gate Valve -  WZ Series Metal seated OS&Y gate valve – TWS Valve

      High definition Knife Gate Valve - WZ Series ...

      Description: WZ Series Metal seated OS&Y gate valve use a ductile iron gate that houses bronze rings to ensure a watertight seal. The OS&Y (Outside Screw and Yoke) gate valve is mainly used in fire protection sprinkler systems. The main difference from a standard NRS (Non Rising Stem) gate valve is that the stem and stem nut are placed outside the valve body. This makes it easy to see if the valve is open or closed, as almost the entire length of the stem is visible when the valve is ...

    • Good Wholesale Vendors Worm Gear Flange Butterfly Valve - ED Series Wafer butterfly valve – TWS Valve

      Good Wholesale Vendors Worm Gear Flange Butterf...

      Description: ED Series Wafer butterfly valve is soft sleeve type and can separate the body and fluid medium exactly,. Material of Main Parts:  Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Seat Specification: Material Temperature Use Description NBR -23℃ ~ 82℃ Buna-NBR:(Nitrile Butadiene Rubber ) has good tensile s...

    • Chinese Professional Butterfly Valve Cartridge Seat - ED Series Wafer butterfly valve – TWS Valve

      Chinese Professional Butterfly Valve Cartridge ...

      Description: ED Series Wafer butterfly valve is soft sleeve type and can separate the body and fluid medium exactly,. Material of Main Parts:  Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Seat Specification: Material Temperature Use Description NBR -23℃ ~ 82℃ Buna-NBR:(Nitrile Butadiene Rubber ) has good tensile st...