Original Factory Butterfly Valve Factory - ED Series Wafer butterfly valve – TWS Valve

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

, , ,
Original Factory Butterfly Valve Factory - ED Series Wafer butterfly valve – TWS Valve Detail:

Description:

ED Series Wafer butterfly valve is soft sleeve type and can separate the body and fluid medium exactly,.

Material of Main Parts: 

Parts Material
Body CI,DI,WCB,ALB,CF8,CF8M
Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel
Stem SS416,SS420,SS431,17-4PH
Seat NBR,EPDM,Viton,PTFE
Taper Pin SS416,SS420,SS431,17-4PH

Seat Specification:

Material Temperature Use Description
NBR -23℃ ~ 82℃ Buna-NBR:(Nitrile Butadiene Rubber ) has good tensile strength and resistance to abrasion.It is also resistant to hydrocarbon products.It is a good general-service material for use in water,vacuum,acid,salts,alkalines,fats,oils,greases,hydraulic oils and ethylene glycol. Buna-N can not use for acetone,ketones and nitrated or chlorinated hydrocarbons.
Shot time-23℃ ~120℃
EPDM -20 ℃~130℃ General EPDM rubber: is a good general-service synthetic rubber used in hot-water, drinks, milk product systems and those containing ketones, alcohol, nitric ether esters and glycerol. But EPDM can not use for hydrocarbon based oils, minerals or solvents.
Shot time-30℃ ~ 150℃
Viton -10 ℃~ 180℃ Viton is a fluorinated hydrocarbon elastomer with excellent resistance to most hydrocarbon oils and gases and other petroleum-based products. Viton can not use for steam service, hot water over 82℃ or concentrated alkalines.
PTFE -5℃ ~ 110℃ PTFE has good chemical performance stability and surface will be not sticky.At the same time, it has good lubricity property and aging resistance. It is a good material for use in acids, alkalis, oxidant and other corrodents.
(Inner liner EDPM)
PTFE -5℃~90℃
(Inner liner NBR)

Operation:lever,gearbox,electrical actuator,pneumatic actuator.

Characteristics:

1.Stem head design of Double “D” or Square cross:Convenient to connect with various actuators,deliver more torque;

2.Two piece stem square driver:No-space connection applies to any poor conditions;

3.Body without Frame structure:The seat can separate the body and fluid medium exactly,and convenient with pipe flange.

Dimension:

20210927171813


Product detail pictures:

Original Factory Butterfly Valve Factory - ED Series Wafer butterfly valve – TWS Valve detail pictures


Related Product Guide:

Original Factory Butterfly Valve Factory - ED Series Wafer butterfly valve – TWS Valve , The product will supply to all over the world, such as: , , ,

  • 5 Stars By from -

    5 Stars By from -
    Write your message here and send it to us

    Related products

    • High Quality Y-Strainer - TWS Flanged Y strainer According to DIN3202 F1 – TWS Valve

      High Quality Y-Strainer - TWS Flanged Y strain...

      Description: TWS Flanged Y Strainer is device for mechanically removing unwanted solids from liquid, gas or steam lines by means of a perforated or wire mesh straining element. They are used in pipelines to protect pumps, meters, control valves, steam traps, regulators and other process equipment. Introductioin: Flanged strainers are main parts of all kinds of pumps, valves in the pipeline. It is suitable for pipeline of norminal pressure<1.6MPa. Mainly used to filter dirt, rust and other ...

    • China OEM Ductile Iron Non Return Check Valve - EH Series Dual plate wafer check valve – TWS Valve

      China OEM Ductile Iron Non Return Check Valve -...

      Description: EH Series Dual plate wafer check valve is with two torsion springs added to each of pair valve plates, which close the plates quickly and automatically, that can prevent the medium from flowing back.The check valve can be installed on both horizontal and vertical direction pipelines. Characteristic: -Small in size, light in weight, compact in sturcture, easy in maintenance. -Two torsion springs are added to each of the pair valve plates, which close the plates quickly and automat...

    • OEM China En558-1 Check Valve - BH Series Dual plate wafer check valve – TWS Valve

      OEM China En558-1 Check Valve - BH Series Dual...

      Description: BH Series Dual plate wafer check valve is the cost-effective backflow protection for piping systems,as it is the only fully elastomer-lined insert check valve.The valve body is completely isolated from line media which can extend the service life of this series in most appications and makes it an especially economical alternative in application which would othervise require check valve made of expensive alloys.. Characteristic: -Small in size, light in weight, compact in sturctur...

    • Super Purchasing for Flange Lug Wafer Butterfly Valve - UD Series hard-seated butterfly valve – TWS Valve

      Super Purchasing for Flange Lug Wafer Butterfly...

      Description: UD Series hard seated butterfly valve is Wafer pattern with flanges ,the face to face is EN558-1 20 series as wafer type. Material of Main Parts: Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Characteristics: 1.Correcting holes are made on flange according to standard, easy correcting during the installation...

    • 2021 High quality Bs5153 Check Valve - RH Series Rubber seated swing check valve – TWS Valve

      2021 High quality Bs5153 Check Valve - RH Seri...

      Description: RH Series Rubber seated swing check valve is simple, durable and exhibits improved design features over that of traditional metal-seated swing check valves. The disc and shaft are fully encapsulated with EPDM rubber to create the valve’s only moving part Characteristic: 1. Small in size&light in weight and easy maintenance. It can be mounted wherever needed. 2. Simple, compact structure, quick 90 degree on-off operation 3. Disc has two-way bearing, perfect seal, without leaka...

    • Good Quality Double Orifice Air Release Valve - TWS Air release valve – TWS Valve

      Good Quality Double Orifice Air Release Valve -...

      Description: The composite high-speed air release valve are combined with two parts of high-pressure diaphragm air valve and the low pressure inlet and exhaust valve ,It has both exhaust and intake functions. The high-pressure diaphragm air release valve automatically discharges the small amount of air accumulated in the pipeline when the pipeline is under pressure. The low-pressure intake and exhaust valve can not only discharge the air in the pipe when the empty pipe is filled with water, b...