OEM/ODM Supplier Vag Butterfly Valve - MD Series Wafer butterfly valve – TWS Valve
OEM/ODM Supplier Vag Butterfly Valve - MD Series Wafer butterfly valve – TWS Valve Detail:
Description:
Comparing to our YD series,flange connection of MD Series wafer butterfly valve is specific,the handle is malleable iron.
Working Temperature:
•-45℃ to +135℃ for EPDM liner
• -12℃ to +82℃ for NBR liner
• +10℃ to +150℃ for PTFE liner
Material of Main Parts:
| Parts | Material |
| Body | CI,DI,WCB,ALB,CF8,CF8M |
| Disc | DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel |
| Stem | SS416,SS420,SS431,17-4PH |
| Seat | NBR,EPDM,Viton,PTFE |
| Taper Pin | SS416,SS420,SS431,17-4PH |
Dimension:
| Size | A | B | C | D | L | H | D1 | n-Φ | K | E | n1-Φ1 | Φ2 | G | n2-M | f | j | X | Weight (kg) | |
| (mm) | (inch) | ||||||||||||||||||
| 40 | 1.5 | 136 | 69 | 33 | 42.6 | 28 | 77.77 | 110 | 4-18 | 77 | 50 | 4-6.7 | 12.6 | 100 | ─ | 13 | 13.8 | 3 | 2.3 |
| 50 | 2 | 161 | 80 | 43 | 52.9 | 28 | 84.84 | 120 | 4-23 | 77 | 57.15 | 4-6.7 | 12.6 | 100 | ─ | 13 | 13.8 | 3 | 2.8 |
| 65 | 2.5 | 175 | 89 | 46 | 64.5 | 28 | 96.2 | 136.2 | 4-26.5 | 77 | 57.15 | 4-6.7 | 12.6 | 120 | ─ | 13 | 13.8 | 3 | 3.5 |
| 80 | 3 | 181 | 95 | 45.21 | 78.8 | 28 | 61.23 | 160 | 8-18 | 77 | 57.15 | 4-6.7 | 12.6 | 127 | ─ | 13 | 13.8 | 3 | 3.7 |
| 100 | 4 | 200 | 114 | 52.07 | 104 | 28 | 70.8 | 185 | 4-24.5 | 92 | 69.85 | 4-10.3 | 15.77 | 156 | ─ | 13 | 17.77 | 5 | 5.4 |
| 125 | 5 | 213 | 127 | 55.5 | 123.3 | 28 | 82.28 | 215 | 4-23 | 92 | 69.85 | 4-10.3 | 18.92 | 190 | ─ | 13 | 20.92 | 5 | 7.7 |
| 150 | 6 | 226 | 139 | 55.75 | 155.6 | 28 | 91.08 | 238 | 4-25 | 92 | 69.85 | 4-10.3 | 18.92 | 212 | ─ | 13 | 20.92 | 5 | 9.3 |
| 200 | 8 | 260 | 175 | 60.58 | 202.5 | 38 | 112.89/76.35 | 295 | 4-25/4-23 | 115 | 88.9 | 4-14.3 | 22.1 | 268 | ─ | 13 | 24.1 | 5 | 14.5 |
| 250 | 10 | 292 | 203 | 68 | 250.5 | 38 | 92.4 | 357 | 4-29/4-29 | 115 | 88.9 | 4-14.3 | 28.45 | 325 | ─ | 13 | 31.45 | 8 | 23 |
| 300 | 12 | 337 | 242 | 76.9 | 301.6 | 38 | 105.34 | 407 | 4-30 | 140 | 107.95 | 4-14.3 | 31.6 | 403 | ─ | 20 | 34.6 | 8 | 36 |
| 350 | 14 | 368 | 267 | 76.5 | 333.3 | 45 | 91.11 | 467 | 4-26/4-30 | 140 | 107.95 | 4-14.3 | 31.6 | 436 | ─ | 20 | 34.6 | 8 | 45 |
| 400 | 16 | 400 | 325 | 85.7 | 389.6 | 51/60 | 100.47/102.425 | 515/525 | 4-26/4-30 | 197 | 158.75 | 4-20.6 | 33.15 | 488 | ─ | 20 | 36.15 | 10 | 65 |
| 450 | 18 | 422 | 345 | 104.6 | 440.51 | 51/60 | 88.39/91.51 | 565/585 | 4-26/4-33 | 197 | 158.75 | 4-20.6 | 37.95 | 536 | ─ | 20 | 41 | 10 | 86 |
| 500 | 20 | 480 | 378 | 130.28 | 491.6 | 57/75 | 86.99/101.68 | 620/650 | 20-30/20-36 | 197 | 158.75 | 4-20.6 | 41.15 | 590 | ─ | 22 | 44.15 | 10 | 113 |
| 600 | 24 | 562 | 475 | 151.36 | 592.5 | 70/75 | 113.42/120.46 | 725/770 | 24-30/24-33 | 276 | 215.9 | 4-22.2 | 50.65 | 816 | ─ | 22 | 54.65 | 16 | 209 |
| 700 | 28 | 624 | 535 | 163 | 695 | 66 | 109.65 | 840 | 24-30 | 300 | 254 | 8-18 | 63.35 | 895 | ─ | 30 | 71.4 | 18 | 292 |
| 800 | 32 | 672 | 606 | 188 | 794.7 | 66 | 124 | 950 | 24-33 | 300 | 254 | 8-18 | 63.35 | 1015 | ─ | 30 | 71.4 | 18 | 396 |
| 900 | 36 | 720 | 670 | 203 | 870 | 118 | 117.57 | 1050 | 24-33 | 300 | 254 | 8-18 | 75 | 1115 | 4-M30 | 34 | 84 | 20 | 520 |
| 1000 | 40 | 800 | 735 | 216 | 970 | 142 | 129.89 | 1160 | 24-36 | 300 | 254 | 8-18 | 85 | 1230 | 4-M33 | 35 | 95 | 22 | 668 |
| 1200 | 48 | 941 | 878 | 254 | 1160 | 150 | 101.5 | 1380 | 32-39 | 350 | 298 | 8-22 | 105 | 1455 | 4-M36 | 35 | 117 | 28 | 1080 |
Product detail pictures:
Related Product Guide:
OEM/ODM Supplier Vag Butterfly Valve - MD Series Wafer butterfly valve – TWS Valve , The product will supply to all over the world, such as: , , ,
By from -
By from -
Related products
-
Factory wholesale Center Line Butterfly Valve -...
UD Series soft sleeve seated butterfly valve is Wafer pattern with flanges ,the face to face is EN558-1 20 series as wafer type. Characteristics: 1.Correcting holes are made on flange according to standard, easy correcting during the installation. 2.Through-out bolt or one-side bolt used. Easy replacing and maintenance. 3.The soft sleeve seat can isolate the body from media. Product operation instruction 1. Pipe flange standards should conform to butterfly valve standards; suggest using weldi...
-
High Quality for China Swing Check Valve - BH ...
Description: BH Series Dual plate wafer check valve is the cost-effective backflow protection for piping systems,as it is the only fully elastomer-lined insert check valve.The valve body is completely isolated from line media which can extend the service life of this series in most appications and makes it an especially economical alternative in application which would othervise require check valve made of expensive alloys.. Characteristic: -Small in size, light in weight, compact in sturctur...
-
Massive Selection for Flange Lug Wafer Butterfl...
UD Series soft sleeve seated butterfly valve is Wafer pattern with flanges ,the face to face is EN558-1 20 series as wafer type. Characteristics: 1.Correcting holes are made on flange according to standard, easy correcting during the installation. 2.Through-out bolt or one-side bolt used. Easy replacing and maintenance. 3.The soft sleeve seat can isolate the body from media. Product operation instruction 1. Pipe flange standards should conform to butterfly valve standards; suggest using weldi...
-
factory low price Butterfly Valve For Potable W...
UD Series soft sleeve seated butterfly valve is Wafer pattern with flanges ,the face to face is EN558-1 20 series as wafer type. Characteristics: 1.Correcting holes are made on flange according to standard, easy correcting during the installation. 2.Through-out bolt or one-side bolt used. Easy replacing and maintenance. 3.The soft sleeve seat can isolate the body from media. Product operation instruction 1. Pipe flange standards should conform to butterfly valve standards; suggest using weldi...
-
Manufacturer for Dutile Iron Y Type Strainer -...
Description: Y strainers mechanically remove solids from flowing steam, gases or liquid piping systems with the use of a perforated or wire mesh straining screen, and are used to protect equipment. From a simple low pressure cast iron threaded strainer to a large, high pressure special alloy unit with a custom cap design. Material list: Parts Material Body Cast iron Bonnet Cast iron Filtering net Stainless steel Feature: Unlike other types of strainers, a Y-Strainer has the advan...
-
China wholesale Y Magnet Strainer - TWS Flange...
Description: TWS Flanged Y Strainer is device for mechanically removing unwanted solids from liquid, gas or steam lines by means of a perforated or wire mesh straining element. They are used in pipelines to protect pumps, meters, control valves, steam traps, regulators and other process equipment. Introductioin: Flanged strainers are main parts of all kinds of pumps, valves in the pipeline. It is suitable for pipeline of norminal pressure<1.6MPa. Mainly used to filter dirt, rust and other ...
