OEM/ODM Manufacturer Non Rising Stem Metal Seated Gate Valve - AZ Series Resilient seated NRS gate valve – TWS Valve
OEM/ODM Manufacturer Non Rising Stem Metal Seated Gate Valve - AZ Series Resilient seated NRS gate valve – TWS Valve Detail:
Description:
AZ Series Resilient seated NRS gate valve is a wedge gate valve and Non-rising stem type, and suitable for use with water and neutral liquids (sewage) . The non-rising stem design ensures the stem thread is adequately lubricated by the water passing through the valve.
Characteristic:
-On-line replacement of top seal: Easy installation and maintenance.
-Integral rubber-clad disc: The ductile iron frame work is thermal-clad integrally with high performance rubber. Ensuring tight seal and rust prevention.
-Integrated brass nut: By means of special casting process. the brass stem nut is integrated with the disc with secure connection, thus the products is safe and reliable.
-Flat-bottom seat: The sealing surface of the body is flat without hollow, avoiding any dirt deposit.
Application:
Water supply system, water treatment, sewage disposal, food processing, fire protection system, natural gas, liquefied gas system etc.
Dimensions:
| Size mm (inch) | D1 | D2 | D0 | H | L | b | N-Φd | Weight (kg) |
| 65(2.5″) | 139.7(5.5) | 178(7) | 160(6.3) | 256(10.08 | 190.5(7.5) | 17.53(0.69) | 4-19(0.75) | 15 |
| 80(3″) | 152.4(6_) | 190.5(7.5) | 180(7.09) | 275(10.83) | 203.2(8) | 19.05(0.75) | 4-19(0.75) | 20.22 |
| 100(4″) | 190.5(7.5) | 228.6(9) | 200(7.87) | 310(12.2) | 228.6(9) | 23.88(0.94) | 8-19(0.75) | 30.5 |
| 150(6″) | 241.3(9.5) | 279.4(11) | 251(9.88) | 408(16.06) | 266.7(10.5) | 25.4(1) | 8-22(0.88) | 53.75 |
| 200(8″) | 298.5(11.75) | 342.9(13.5) | 286(11.26) | 512(20.16) | 292.1(11.5) | 28.45(1.12) | 8-22(0.88) | 86.33 |
| 250(10″) | 362(14.252) | 406.4(16) | 316(12.441) | 606(23.858) | 330.2(13) | 30.23(1.19) | 12-25.4(1) | 133.33 |
| 300(12″) | 431.8(17) | 482.6(19) | 356(14.06) | 716(28.189) | 355.6(14) | 31.75(1.25) | 12-25.4(1) | 319 |
Product detail pictures:
Related Product Guide:
OEM/ODM Manufacturer Non Rising Stem Metal Seated Gate Valve - AZ Series Resilient seated NRS gate valve – TWS Valve , The product will supply to all over the world, such as: , , ,
By from -
By from -
Related products
-
OEM Factory for Cast Iron Wafer Check Valve - ...
Description: BH Series Dual plate wafer check valve is the cost-effective backflow protection for piping systems,as it is the only fully elastomer-lined insert check valve.The valve body is completely isolated from line media which can extend the service life of this series in most appications and makes it an especially economical alternative in application which would othervise require check valve made of expensive alloys.. Characteristic: -Small in size, light in weight, compact in sturctur...
-
Online Exporter Handle Wafer Butterfly Valve -...
Description: Comparing to our YD series,flange connection of MD Series wafer butterfly valve is specific,the handle is malleable iron. Working Temperature: •-45℃ to +135℃ for EPDM liner • -12℃ to +82℃ for NBR liner • +10℃ to +150℃ for PTFE liner Material of Main Parts: Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Dimen...
-
Manufacturer of Water Seal Butterfly Valve - F...
Description: FD Series Wafer butterfly valve with PTFE lined structure, this series resilient seated butterfly valve is designed for corrosive media, especially various kinds of strong acids, such as sulfuric acid and aqua regia. The PTFE material will not pollute media within a pipeline. Characteristic: 1. The butterfly valve comes with two-way installation, zero leakage, corrosion resistance, light weight, small size, low cost and easy installation.2. Tts PTFE clad seat is capable of protec...
-
Hot New Products Flange End Y Type Strainer - ...
Description: TWS Flanged Y Magnet Strainer with Magnetic rod for magnetic metal particles segregation. Quantity of magnet set: DN50~DN100 with one magnet set; DN125~DN200 with two magnet sets; DN250~DN300 with three magnet sets; Dimensions: Size D d K L b f n-d H DN50 165 99 125 230 19 2.5 4-18 135 DN65 185 118 145 290 19 2.5 4-18 160 DN80 200 132 160 310 19 2.5 8-18 180 DN100 220 156 180 350 19 2.5 8-18 210 DN150 285 211 240 480 19 2.5 8-22 300 DN200 340 266 295 600 20 ...
-
Manufacturer for Cast Iron Gate Valve - WZ Ser...
Description: WZ Series Metal seated NRS gate valve use a ductile iron gate that houses bronze rings to ensure a watertight seal. The non-rising stem design ensures the stem thread is adequately lubricated by the water passing through the valve. Application: Water supply system, water treatment, sewage disposal, food processing, fire protection system, natural gas, liquefied gas system etc. Dimensions: Type DN(mm) L D D1 b Z-Φd H D0 Weight (kg) NRS 40 165 150 110 18 4-Φ19 257 140 10/11 ...
-
Best Price for China Wafer Butterfly Valve - M...
Description: Comparing to our YD series,flange connection of MD Series wafer butterfly valve is specific,the handle is malleable iron. Working Temperature: •-45℃ to +135℃ for EPDM liner • -12℃ to +82℃ for NBR liner • +10℃ to +150℃ for PTFE liner Material of Main Parts: Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Dimens...
