OEM/ODM Factory F4 Resilient Gate Valve - EZ Series Resilient seated NRS gate valve – TWS Valve
OEM/ODM Factory F4 Resilient Gate Valve - EZ Series Resilient seated NRS gate valve – TWS Valve Detail:
Description:
EZ Series Resilient seated NRS gate valve is a wedge gate valve and Non-rising stem type, and suitable for use with water and neutral liquids (sewage).
Characteristic:
-On-line replacement of top seal: Easy installation and maintenance.
-Integral rubber-clad disc: The ductile iron frame work is thermal-clad integrally with high performance rubber. Ensuring tight seal and rust prevention.
-Integrated brass nut: By means of special casting process. the brass stem nut is integrated with the disc with secure connection, thus the products is safe and reliable.
-Flat-bottom seat: The sealing surface of the body is flat without hollow, avoiding any dirt deposit.
-Whollly-through flow channel: the whole flow channel is through, giving “Zero” pressure loss.
-Dependable top sealing: with multi-O ring structure adopted, the sealing is dependable.
-Epoxy resin coating: the cast is sprayed with epoxy resin coat both inside and outside, and the dics is wholly clad with rubber in accordance with food hygiene requirement, so it is safe and resistant to corrosion.
Application:
Water supply system, water treatment, sewage disposal, food processing, fire protection system, natural gas, liquefied gas system etc.
Dimensions:
| DN | L | D | D1 | b | N-d0 | H | D0 | Weight(kg) | |||||||
| F4 | F5 | 5163 | 10 | 16 | 10 | 16 | 10 | 16 | 10 | 16 | 10 | 16 | |||
| 50(2″) | 150 | 250 | 178 | 165 | 125 | 19 | 4-19 | 249 | 180 | 10 | 11 | ||||
| 65(2.5″) | 170 | 270 | 190 | 185 | 145 | 19 | 4-19 | 274 | 180 | 13 | 14 | ||||
| 80(3″) | 180 | 280 | 203 | 200 | 160 | 18-19 | 8-19 | 310 | 200 | 23 | 24 | ||||
| 100(4″) | 190 | 300 | 229 | 220 | 180 | 18-19 | 8-19 | 338 | 240 | 25 | 26 | ||||
| 125(5″) | 200 | 325 | 254 | 250 | 210 | 18 | 8-19 | 406 | 300 | 33 | 35 | ||||
| 150(6″) | 210 | 350 | 267 | 285 | 240 | 19 | 8-23 | 470 | 300 | 42 | 44 | ||||
| 200(8″) | 230 | 400 | 292 | 340 | 295 | 20 | 8-23 | 12-23 | 560 | 350 | 76 | 80 | |||
| 250(10″) | 250 | 450 | 330 | 395 | 405 | 350 | 355 | 22 | 12-23 | 12-28 | 642 | 350 | 101 | 116 | |
| 300(12″) | 270 | 500 | 356 | 445 | 460 | 400 | 410 | 24 | 22 | 12-23 | 12-28 | 740 | 400 | 136 | 156 |
| 350(14″) | 290 | 550 | 381 | 505 | 520 | 460 | 470 | 25 | 16-23 | 16-25 | 802 | 450 | 200 | 230 | |
| 400(16″) | 310 | 600 | 406 | 565 | 580 | 515 | 525 | 28 | 16-25 | 16-30 | 907 | 450 | 430 | 495 | |
| 450(18″) | 330 | 650 | 432 | 615 | 640 | 565 | 585 | 29 | 20-25 | 20-30 | 997 | 620 | 450 | 518 | |
| 500(20″) | 350 | 700 | 457 | 670 | 715 | 620 | 650 | 31 | 20-25 | 20-34 | 1110 | 620 | 480 | 552 | |
| 600(24″) | 390 | 800 | 508 | 780 | 840 | 725 | 770 | 33 | 20-30 | 20-41 | 1288 | 620 | 530 | 610 | |
Product detail pictures:
Related Product Guide:
OEM/ODM Factory F4 Resilient Gate Valve - EZ Series Resilient seated NRS gate valve – TWS Valve , The product will supply to all over the world, such as: , , ,
By from -
By from -
Related products
-
factory Outlets for Industry Butterfly Valve -...
Description: Comparing to our YD series,flange connection of MD Series wafer butterfly valve is specific,the handle is malleable iron. Working Temperature: •-45℃ to +135℃ for EPDM liner • -12℃ to +82℃ for NBR liner • +10℃ to +150℃ for PTFE liner Material of Main Parts: Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Dimens...
-
PriceList for China Wafer Check Valve - AH Ser...
Description: Material list: No. Part Material AH EH BH MH 1 Body CI DI WCB CF8 CF8M C95400 CI DI WCB CF8 CF8M C95400 WCB CF8 CF8M C95400 2 Seat NBR EPDM VITON etc. DI Covered Rubber NBR EPDM VITON etc. 3 Disc DI C95400 CF8 CF8M DI C95400 CF8 CF8M WCB CF8 CF8M C95400 4 Stem 416/304/316 304/316 WCB CF8 CF8M C95400 5 Spring 316 …… Feature: Fasten Screw: Effectively prenvent the shaft from traveling,prevent valve work from failing and end from leaking. Body: Short face to f...
-
Cheapest Price Ductile Iron Butterfly Valve - ...
Description: DL Series flanged concentric butterfly valve is with centric disc and bonded liner,and have all same common features of other wafer/lug series,these valves are featured by a higher strength of the body and better resistance to pipe pressures as safey factor. Having all same common features of the univisal series, these valves are featured by a higher strength of the body and better resistance to pipe pressures as safety factor. Characteristic: 1. Short Length pattern design 2. V...
-
Factory source Gate Valve Application - AZ Ser...
Description: AZ Series Resilient seated NRS gate valve is a wedge gate valve and Non-rising stem type, and suitable for use with water and neutral liquids (sewage) . The non-rising stem design ensures the stem thread is adequately lubricated by the water passing through the valve. Characteristic: -On-line replacement of top seal: Easy installation and maintenance. -Integral rubber-clad disc: The ductile iron frame work is thermal-clad integrally with high performance rubber. Ensuring tight s...
-
2021 High quality Cast Iron Butterfly Valve - ...
Description: YD Series Wafer butterfly valve ‘s flange connection is universal standard,and the material of handle is aluminium;It can be used as a device to cut-off or regulate the flow in various medium pipes. Through selecting different materials of disc and seal seat, as well as the pinless connection between disc and stem,the valve can be applied to worse conditions, such as desulphurization vacuum, sea water desalinization. Characteristic: 1. Small in size&light in weight and ...
-
Ordinary Discount China Flange Butterfly Valve ...
Description: UD Series hard seated butterfly valve is Wafer pattern with flanges ,the face to face is EN558-1 20 series as wafer type. Material of Main Parts: Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Characteristics: 1.Correcting holes are made on flange according to standard, easy correcting during the installation...
