OEM Manufacturer Ductile Iron Wafer Check Valve - BH Series Dual plate wafer check valve – TWS Valve
OEM Manufacturer Ductile Iron Wafer Check Valve - BH Series Dual plate wafer check valve – TWS Valve Detail:
Description:
BH Series Dual plate wafer check valve is the cost-effective backflow protection for piping systems,as it is the only fully elastomer-lined insert check valve.The valve body is completely isolated from line media which can extend the service life of this series in most appications and makes it an especially economical alternative in application which would othervise require check valve made of expensive alloys..
Characteristic:
-Small in size, light in weight, compact in sturcture, easy in maintenance.-Two torsion springs are added to each of the pair valve plates, which close the plates quickly and automatically.
-The Quick cloth action preventsthe medium from flowing back.
-Short face to face and good rigidity.
-Easy installation, it can be installed on both horizontal and vertival direction pipelines.
-This valve is tighly sealed, without leakage under the water pressure test.
-Safe and reliable in operation, High interference-resistance.
Dimensions:
| Size | A | B | C | D | K | F | G | H | J | E | Weight (kg) | |
| (mm) | (inch) | |||||||||||
| 50 | 2″ | 159 | 101.6 | 84.14 | 66.68 | 52.39 | 120.65 | 19.05 | 28.45 | 47.63 | 53.98 | 2 |
| 65 | 2.5″ | 178 | 120.65 | 98.43 | 79.38 | 52.39 | 139.7 | 19.05 | 36.51 | 58.74 | 53.98 | 2.9 |
| 80 | 3″ | 191 | 133.35 | 115.89 | 92.08 | 52.39 | 152.4 | 19.05 | 41.28 | 69.85 | 53.98 | 3.2 |
| 100 | 4″ | 235 | 171.45 | 142.88 | 117.48 | 61.91 | 190.5 | 19.05 | 53.98 | 87.31 | 63.5 | 6.4 |
| 125 | 5″ | 270 | 193.68 | 171.45 | 144.46 | 65.02 | 215.9 | 22.35 | 67.47 | 112.71 | 66.68 | 7.5 |
| 150 | 6″ | 305 | 222.25 | 200.03 | 171.45 | 77.79 | 241.3 | 22.35 | 80.17 | 141.29 | 79.38 | 10.7 |
| 200 | 8″ | 368 | 269.88 | 254 | 222.25 | 96.84 | 289.45 | 22.35 | 105.57 | 192.09 | 98.43 | 18.5 |
| 250 | 10″ | 429 | 336.55 | 307.98 | 276.23 | 100.01 | 361.95 | 25.4 | 130.18 | 230.19 | 101.6 | 24 |
| 300 | 12″ | 495 | 464 | 365.13 | 327.03 | 128.59 | 431.8 | 25.4 | 158.75 | 274.64 | 130.18 | 41.5 |
| 350 | 14″ | 572 | 447.68 | 396.88 | 358.78 | 177.8 | 476.25 | 28.45 | 171.45 | 306.39 | 180.98 | 63.3 |
| 400 | 16″ | 632 | 511.18 | 450.85 | 409.58 | 158.75 | 539.75 | 28.45 | 196.85 | 355.6 | 161.93 | 73.9 |
| 450 | 18″ | 641 | 546.1 | 508 | 460.37 | 180.97 | 577.85 | 31.75 | 222.25 | 406.14 | 184.15 | 114 |
| 500 | 20″ | 699 | 596.9 | 555.62 | 511.17 | 212.72 | 635 | 31.75 | 247.65 | 469.9 | 215.9 | 165 |
Product detail pictures:
Related Product Guide:
OEM Manufacturer Ductile Iron Wafer Check Valve - BH Series Dual plate wafer check valve – TWS Valve , The product will supply to all over the world, such as: , , ,
By from -
By from -
Related products
-
Free sample for Genebre Butterfly Valve - UD S...
UD Series soft sleeve seated butterfly valve is Wafer pattern with flanges ,the face to face is EN558-1 20 series as wafer type. Characteristics: 1.Correcting holes are made on flange according to standard, easy correcting during the installation. 2.Through-out bolt or one-side bolt used. Easy replacing and maintenance. 3.The soft sleeve seat can isolate the body from media. Product operation instruction 1. Pipe flange standards should conform to butterfly valve standards; suggest using weldi...
-
Factory wholesale Sea Water Check Valve - BH S...
Description: BH Series Dual plate wafer check valve is the cost-effective backflow protection for piping systems,as it is the only fully elastomer-lined insert check valve.The valve body is completely isolated from line media which can extend the service life of this series in most appications and makes it an especially economical alternative in application which would othervise require check valve made of expensive alloys.. Characteristic: -Small in size, light in weight, compact in sturctur...
-
Factory supplied Butterfly Valve Manufacturers ...
Description: UD Series hard seated butterfly valve is Wafer pattern with flanges ,the face to face is EN558-1 20 series as wafer type. Material of Main Parts: Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Characteristics: 1.Correcting holes are made on flange according to standard, easy correcting during the installation...
-
High Quality Y-Strainer - TWS Flanged Y Strain...
Description: Y strainers mechanically remove solids from flowing steam, gases or liquid piping systems with the use of a perforated or wire mesh straining screen, and are used to protect equipment. From a simple low pressure cast iron threaded strainer to a large, high pressure special alloy unit with a custom cap design. Material list: Parts Material Body Cast iron Bonnet Cast iron Filtering net Stainless steel Feature: Unlike other types of strainers, a Y-Strainer has the advan...
-
Wholesale Dealers of Flowserve Butterfly Valve ...
Description: Comparing to our YD series,flange connection of MD Series wafer butterfly valve is specific,the handle is malleable iron. Working Temperature: •-45℃ to +135℃ for EPDM liner • -12℃ to +82℃ for NBR liner • +10℃ to +150℃ for PTFE liner Material of Main Parts: Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Dimen...
-
High Quality for Din3352-F4 Gate Valve - EZ Se...
Description: EZ Series Resilient seated NRS gate valve is a wedge gate valve and Non-rising stem type, and suitable for use with water and neutral liquids (sewage). Characteristic: -On-line replacement of top seal: Easy installation and maintenance. -Integral rubber-clad disc: The ductile iron frame work is thermal-clad integrally with high performance rubber. Ensuring tight seal and rust prevention. -Integrated brass nut: By means of special casting process. the brass stem nut is integrated ...
