OEM Customized Electric Gate Valve - EZ Series Resilient seated OS&Y gate valve – TWS Valve
OEM Customized Electric Gate Valve - EZ Series Resilient seated OS&Y gate valve – TWS Valve Detail:
Description:
EZ Series Resilient seated OS&Y gate valve is a wedge gate valve and Rising stem type, and suitable for use with water and neutral liquids (sewage).
Material:
| Parts | Material |
| Body | Cast iron,Ductile iron |
| Disc | Ductilie iron&EPDM |
| Stem | SS416,SS420,SS431 |
| Bonnet | Cast iron,Ductile iron |
| Stem nut | Bronze |
Pressure test:
| Nominal pressure | PN10 | PN16 | |
| Test pressure | Shell | 1.5 Mpa | 2.4 Mpa |
| Sealing | 1.1 Mpa | 1.76 Mpa | |
Operation:
1． Manual actuation
In most cases,resilient seated gate valve are operated by handwheel or a cap top using a T-key.TWS offer handwheel with the right dimension according to the DN and operating torque.Regarding cap tops,TWS products comply with the different standards;
2． Buried installations
One special case of manual actuation occurs when the the valve buried and the actuation has to be done from th surface;
3． Electrical actuation
For remote control,allow the final user to monitor the operations of the valves.
Dimensions:
| Type | Size (mm) | L | D | D1 | b | N-d0 | H | D0 | Weight (kg) |
| RS | 50 | 178 | 165 | 125 | 19 | 4-Φ19 | 380 | 180 | 11/12 |
| 65 | 190 | 185 | 145 | 19 | 4-Φ19 | 440 | 180 | 14/15 | |
| 80 | 203 | 200 | 160 | 19 | 8-Φ19 | 540 | 200 | 24/25 | |
| 100 | 229 | 220 | 180 | 19 | 8-Φ19 | 620 | 200 | 26/27 | |
| 125 | 254 | 250 | 210 | 19 | 8-Φ19 | 660 | 250 | 35/37 | |
| 150 | 267 | 285 | 240 | 19 | 8-Φ23 | 790 | 280 | 44/46 | |
| 200 | 292 | 340 | 295 | 20 | 8-Φ23/12-Φ23 | 1040 | 300 | 80/84 | |
| 250 | 330 | 395/405 | 350/355 | 22 | 12-Φ23/12-Φ28 | 1190 | 360 | 116/133 | |
| 300 | 356 | 445/460 | 400/410 | 24.5 | 12-Φ23/12-Φ28 | 1380 | 400 | 156/180 |
Product detail pictures:
Related Product Guide:
OEM Customized Electric Gate Valve - EZ Series Resilient seated OS&Y gate valve – TWS Valve , The product will supply to all over the world, such as: , , ,
By from -
By from -
Related products
-
Good Quality Back Flow Preventer – Mini B...
Description: Most of the residents don’t install the backflow preventer in their water pipe. Only a few people use the normal check valve to prevent back-low. So it will have a big potential ptall. And the old type of backflow preventer is expensive and not easy to drain. So it was very hard to be widely used in the past. But now, we develop the new type to solve it all. Our anti drip mini backlow preventer wil be widely used in the normal user. This is a waterpower control combination ...
-
Factory Outlets Butterfly Valve With Spindle -...
Description: FD Series Wafer butterfly valve with PTFE lined structure, this series resilient seated butterfly valve is designed for corrosive media, especially various kinds of strong acids, such as sulfuric acid and aqua regia. The PTFE material will not pollute media within a pipeline. Characteristic: 1. The butterfly valve comes with two-way installation, zero leakage, corrosion resistance, light weight, small size, low cost and easy installation.2. Tts PTFE clad seat is capable of protec...
-
Short Lead Time for Lug Valve - DL Series flan...
Description: DL Series flanged concentric butterfly valve is with centric disc and bonded liner,and have all same common features of other wafer/lug series,these valves are featured by a higher strength of the body and better resistance to pipe pressures as safey factor. Having all same common features of the univisal series, these valves are featured by a higher strength of the body and better resistance to pipe pressures as safety factor. Characteristic: 1. Short Length pattern design 2. V...
-
OEM/ODM Factory F4 Resilient Gate Valve - EZ S...
Description: EZ Series Resilient seated NRS gate valve is a wedge gate valve and Non-rising stem type, and suitable for use with water and neutral liquids (sewage). Characteristic: -On-line replacement of top seal: Easy installation and maintenance. -Integral rubber-clad disc: The ductile iron frame work is thermal-clad integrally with high performance rubber. Ensuring tight seal and rust prevention. -Integrated brass nut: By means of special casting process. the brass stem nut is integrated ...
-
Europe style for Wafer Soft Seal Butterfly Valv...
Description: Comparing to our YD series,flange connection of MD Series wafer butterfly valve is specific,the handle is malleable iron. Working Temperature: •-45℃ to +135℃ for EPDM liner • -12℃ to +82℃ for NBR liner • +10℃ to +150℃ for PTFE liner Material of Main Parts: Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Dimens...
-
Renewable Design for Flange Valve Pn16 - UD Se...
Description: UD Series hard seated butterfly valve is Wafer pattern with flanges ,the face to face is EN558-1 20 series as wafer type. Material of Main Parts: Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Characteristics: 1.Correcting holes are made on flange according to standard, easy correcting during the installation...
