Manufacturer for Dutile Iron Y Type Strainer - TWS Flanged Y Strainer According to ANSI B16.10 – TWS Valve

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

, , ,
Manufacturer for Dutile Iron Y Type Strainer - TWS Flanged Y Strainer According to ANSI B16.10 – TWS Valve Detail:

Description:

Y strainers mechanically remove solids from flowing steam, gases or liquid piping systems with the use of a perforated or wire mesh straining screen, and are used to protect equipment. From a simple low pressure cast iron threaded strainer to a large, high pressure special alloy unit with a custom cap design.

Material list: 

Parts Material
Body Cast iron
Bonnet Cast iron
Filtering net Stainless steel

Feature:

Unlike other types of strainers, a Y-Strainer has the advantage of being able to be installed in either a horizontal or vertical position. Obviously, in both cases, the screening element must be on the “down side” of the strainer body so that the entrapped material can properly collect in it.

Some manufactures reduce the size of the Y -Strainer body to save material and cut cost. Before installing a Y-Strainer, be sure it is large enough to properly handle the flow. A low-priced strainer may be an indication of an undersized unit. 

Dimensions:

"

Size Face to face Dimensions. Dimensions Weight
DN(mm) L(mm) D(mm) H(mm) kg
50 203.2 152.4 206 13.69
65 254 177.8 260 15.89
80 260.4 190.5 273 17.7
100 308.1 228.6 322 29.97
125 398.3 254 410 47.67
150 471.4 279.4 478 65.32
200 549.4 342.9 552 118.54
250 654.1 406.4 658 197.04
300 762 482.6 773 247.08

Why Use a Y Strainer?

In general, Y strainers are critical anywhere clean fluids are required. While clean fluids can help maximize the reliability and lifespan of any mechanical system, they’re especially important with solenoid valves. This is because solenoid valves are very sensitive to dirt and will only function properly with clean liquids or air. If any solids enter the stream, it can disrupt and even damage the entire system. Therefore, a Y strainer is a great complimentary component. In addition to protecting the performance of solenoid valves, they also help safeguard other types of mechanical equipment, including:
Pumps
Turbines
Spray nozzles
Heat exchangers
Condensers
Steam traps
Meters
A simple Y strainer can keep these components, which are some of the most valuable and expensive parts of the pipeline, protected from the presences of pipe scale, rust, sediment or any other kind of extraneous debris. Y strainers are available in a myriad of designs (and connection types) that can accommodate any industry or application.

 


Product detail pictures:

Manufacturer for Dutile Iron Y Type Strainer - TWS Flanged Y Strainer According to ANSI B16.10 – TWS Valve detail pictures


Related Product Guide:

Manufacturer for Dutile Iron Y Type Strainer - TWS Flanged Y Strainer According to ANSI B16.10 – TWS Valve , The product will supply to all over the world, such as: , , ,

  • 5 Stars By from -

    5 Stars By from -
    Write your message here and send it to us

    Related products

    • 2021 New Style Wafer Buttery Valve - DL Series flanged concentric butterfly valve – TWS Valve

      2021 New Style Wafer Buttery Valve - DL Series...

      Description: DL Series flanged concentric butterfly valve is with centric disc and bonded liner,and have all same common features of other wafer/lug series,these valves are featured by a higher strength of the body and better resistance to pipe pressures as safey factor. Having all same common features of the univisal series, these valves are featured by a higher strength of the body and better resistance to pipe pressures as safety factor.  Characteristic: 1. Short Length pattern design 2. V...

    • Reasonable price Water Use Butterfly Valve - DC Series flanged eccentric butterfly valve – TWS Valve

      Reasonable price Water Use Butterfly Valve - D...

      Description: DC Series flanged eccentric butterfly valve incorporates a positive retained resilient disc seal and either an integral body seat. The valve has three unique attributes: less weight, more strength and lower torque. Characteristic: 1. Eccentric action reduces torque and seat contact during operation extending valve life 2. Suitable for on/off and modulating service. 3. Subject to size and damage, the seat can be repaired in the field and in certain cases, repaired from outside the...

    • Best quality Full Ptfe Lined Butterfly Valve - MD Series Wafer butterfly valve – TWS Valve

      Best quality Full Ptfe Lined Butterfly Valve -...

      Description: Comparing to our YD series,flange connection of MD Series wafer butterfly valve is specific,the handle is malleable iron. Working Temperature: •-45℃ to +135℃ for EPDM liner • -12℃ to +82℃ for NBR liner • +10℃ to +150℃ for PTFE liner Material of Main Parts: Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Dimens...

    • Best Price on Milwaukee Butterfly Valve - ED Series Wafer butterfly valve – TWS Valve

      Best Price on Milwaukee Butterfly Valve - ED S...

      Description: ED Series Wafer butterfly valve is soft sleeve type and can separate the body and fluid medium exactly,. Material of Main Parts:  Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Seat Specification: Material Temperature Use Description NBR -23℃ ~ 82℃ Buna-NBR:(Nitrile Butadiene Rubber ) has good tensile st...

    • Factory wholesale Electric Valve Actuator - YD Series Wafer butterfly valve – TWS Valve

      Factory wholesale Electric Valve Actuator - YD...

      Description: YD Series Wafer butterfly valve ‘s flange connection is universal standard,and the material of handle is aluminium;It can be used as a device to cut-off or regulate the flow in various medium pipes. Through selecting different materials of disc and seal seat, as well as the pinless connection between disc and stem,the valve can be applied to worse conditions, such as desulphurization vacuum, sea water desalinization. Characteristic: 1. Small in size&light in weight and ...

    • OEM Supply Belven Butterfly Valve - MD Series Lug butterfly valve – TWS Valve

      OEM Supply Belven Butterfly Valve - MD Series ...

      Description: MD Series Lug type butterfly valve allows downstream pipelines and equipments online repair, and it can be installed on pipe ends as exhaust valve. Alignment features of lugged body allows easy installation between pipeline flanges. a real installationi cost saving, can be installed in the pipe end. Characteristic: 1. Small in size&light in weight and easy maintenance. It can be mounted wherever needed. 2. Simple, compact structure, quick 90 degree on-off operation 3. Disc ha...