Manufacturer for Check Valves - EH Series Dual plate wafer check valve – TWS Valve
Manufacturer for Check Valves - EH Series Dual plate wafer check valve – TWS Valve Detail:
Description:
EH Series Dual plate wafer check valve is with two torsion springs added to each of pair valve plates, which close the plates quickly and automatically, that can prevent the medium from flowing back.The check valve can be installed on both horizontal and vertical direction pipelines.
Characteristic:
-Small in size, light in weight, compact in sturcture, easy in maintenance.
-Two torsion springs are added to each of the pair valve plates, which close the plates quickly and automatically.
-The Quick cloth action preventsthe medium from flowing back.
-Short face to face and good rigidity.
-Easy installation, it can be installed on both horizontal and vertival direction pipelines.
-This valve is tighly sealed, without leakage under the water pressure test.
-Safe and reliable in operation, High interference-resistance.
Applications:
General industrial use.
Dimensions:
| Size | D | D1 | D2 | L | R | t | Weight(kg) | |
| (mm) | (inch) | |||||||
| 40 | 1.5″ | 92 | 65 | 43.3 | 43 | 28.8 | 19 | 1.5 |
| 50 | 2″ | 107 | 65 | 43.3 | 43 | 28.8 | 19 | 1.5 |
| 65 | 2.5″ | 127 | 80 | 60.2 | 46 | 36.1 | 20 | 2.4 |
| 80 | 3″ | 142 | 94 | 66.4 | 64 | 43.4 | 28 | 3.6 |
| 100 | 4″ | 162 | 117 | 90.8 | 64 | 52.8 | 27 | 5.7 |
| 125 | 5″ | 192 | 145 | 116.9 | 70 | 65.7 | 30 | 7.3 |
| 150 | 6″ | 218 | 170 | 144.6 | 76 | 78.6 | 31 | 9 |
| 200 | 8″ | 273 | 224 | 198.2 | 89 | 104.4 | 33 | 17 |
| 250 | 10″ | 328 | 265 | 233.7 | 114 | 127 | 50 | 26 |
| 300 | 12″ | 378 | 310 | 283.9 | 114 | 148.3 | 43 | 42 |
| 350 | 14″ | 438 | 360 | 332.9 | 127 | 172.4 | 45 | 55 |
| 400 | 16″ | 489 | 410 | 381 | 140 | 197.4 | 52 | 75 |
| 450 | 18″ | 539 | 450 | 419.9 | 152 | 217.8 | 58 | 101 |
| 500 | 20″ | 594 | 505 | 467.8 | 152 | 241 | 58 | 111 |
| 600 | 24″ | 690 | 624 | 572.6 | 178 | 295.4 | 73 | 172 |
| 700 | 28″ | 800 | 720 | 680 | 229 | 354 | 98 | 219 |
Product detail pictures:
Related Product Guide:
Manufacturer for Check Valves - EH Series Dual plate wafer check valve – TWS Valve , The product will supply to all over the world, such as: , , ,
By from -
By from -
Related products
-
Professional China Hydraulic Balancing Valve -...
Description: TWS Flanged Static balancing valve is a key hydraulic balance product used for precise flow regulating of water pipelines system in HVAC application to ensure static hydraulic balance across whole water system. The series can ensure the actual flow of each terminal equipment and pipeline in line with the design flow in the phase of system initial commisiioning by site commissiong with flow measuring computer. The series are widely used in main pipes, branch pipes and terminal equ...
-
Best-Selling Pneumatic Actuator Butterfly Valve...
Description: UD Series hard seated butterfly valve is Wafer pattern with flanges ,the face to face is EN558-1 20 series as wafer type. Material of Main Parts: Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Characteristics: 1.Correcting holes are made on flange according to standard, easy correcting during the installatio...
-
Factory Supply Lug Type Concentric Butterfly Va...
UD Series soft sleeve seated butterfly valve is Wafer pattern with flanges ,the face to face is EN558-1 20 series as wafer type. Characteristics: 1.Correcting holes are made on flange according to standard, easy correcting during the installation. 2.Through-out bolt or one-side bolt used. Easy replacing and maintenance. 3.The soft sleeve seat can isolate the body from media. Product operation instruction 1. Pipe flange standards should conform to butterfly valve standards; suggest using weldi...
-
Good Quality Pneumatic Gate Valve - AZ Series...
Description: AZ Series Resilient seated NRS gate valve is a wedge gate valve and Rising stem (Outside Screw and Yoke)type, and suitable for use with water and neutral liquids (sewage) . The OS&Y (Outside Screw and Yoke) gate valve is mainly used in fire protection sprinkler systems. The main difference from a standard NRS (Non Rising Stem) gate valve is that the stem and stem nut are placed outside the valve body. This makes it easy to see if the valve is open or closed, as almost the ent...
-
2021 Latest Design Cast Steel Butterfly Valve -...
Description: Comparing to our YD series,flange connection of MD Series wafer butterfly valve is specific,the handle is malleable iron. Working Temperature: •-45℃ to +135℃ for EPDM liner • -12℃ to +82℃ for NBR liner • +10℃ to +150℃ for PTFE liner Material of Main Parts: Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Dimens...
-
Original Factory Aluminium Butterfly Valve - U...
UD Series soft sleeve seated butterfly valve is Wafer pattern with flanges ,the face to face is EN558-1 20 series as wafer type. Characteristics: 1.Correcting holes are made on flange according to standard, easy correcting during the installation. 2.Through-out bolt or one-side bolt used. Easy replacing and maintenance. 3.The soft sleeve seat can isolate the body from media. Product operation instruction 1. Pipe flange standards should conform to butterfly valve standards; suggest using weldi...
