Manufactur standard Vertical Check Valve - EH Series Dual plate wafer check valve – TWS Valve
Manufactur standard Vertical Check Valve - EH Series Dual plate wafer check valve – TWS Valve Detail:
Description:
EH Series Dual plate wafer check valve is with two torsion springs added to each of pair valve plates, which close the plates quickly and automatically, that can prevent the medium from flowing back.The check valve can be installed on both horizontal and vertical direction pipelines.
Characteristic:
-Small in size, light in weight, compact in sturcture, easy in maintenance.
-Two torsion springs are added to each of the pair valve plates, which close the plates quickly and automatically.
-The Quick cloth action preventsthe medium from flowing back.
-Short face to face and good rigidity.
-Easy installation, it can be installed on both horizontal and vertival direction pipelines.
-This valve is tighly sealed, without leakage under the water pressure test.
-Safe and reliable in operation, High interference-resistance.
Applications:
General industrial use.
Dimensions:
| Size | D | D1 | D2 | L | R | t | Weight(kg) | |
| (mm) | (inch) | |||||||
| 40 | 1.5″ | 92 | 65 | 43.3 | 43 | 28.8 | 19 | 1.5 |
| 50 | 2″ | 107 | 65 | 43.3 | 43 | 28.8 | 19 | 1.5 |
| 65 | 2.5″ | 127 | 80 | 60.2 | 46 | 36.1 | 20 | 2.4 |
| 80 | 3″ | 142 | 94 | 66.4 | 64 | 43.4 | 28 | 3.6 |
| 100 | 4″ | 162 | 117 | 90.8 | 64 | 52.8 | 27 | 5.7 |
| 125 | 5″ | 192 | 145 | 116.9 | 70 | 65.7 | 30 | 7.3 |
| 150 | 6″ | 218 | 170 | 144.6 | 76 | 78.6 | 31 | 9 |
| 200 | 8″ | 273 | 224 | 198.2 | 89 | 104.4 | 33 | 17 |
| 250 | 10″ | 328 | 265 | 233.7 | 114 | 127 | 50 | 26 |
| 300 | 12″ | 378 | 310 | 283.9 | 114 | 148.3 | 43 | 42 |
| 350 | 14″ | 438 | 360 | 332.9 | 127 | 172.4 | 45 | 55 |
| 400 | 16″ | 489 | 410 | 381 | 140 | 197.4 | 52 | 75 |
| 450 | 18″ | 539 | 450 | 419.9 | 152 | 217.8 | 58 | 101 |
| 500 | 20″ | 594 | 505 | 467.8 | 152 | 241 | 58 | 111 |
| 600 | 24″ | 690 | 624 | 572.6 | 178 | 295.4 | 73 | 172 |
| 700 | 28″ | 800 | 720 | 680 | 229 | 354 | 98 | 219 |
Product detail pictures:
Related Product Guide:
Manufactur standard Vertical Check Valve - EH Series Dual plate wafer check valve – TWS Valve , The product will supply to all over the world, such as: , , ,
By from -
By from -
Related products
-
Good Quality Dual Plate Check Valve - AH Serie...
Description: Material list: No. Part Material AH EH BH MH 1 Body CI DI WCB CF8 CF8M C95400 CI DI WCB CF8 CF8M C95400 WCB CF8 CF8M C95400 2 Seat NBR EPDM VITON etc. DI Covered Rubber NBR EPDM VITON etc. 3 Disc DI C95400 CF8 CF8M DI C95400 CF8 CF8M WCB CF8 CF8M C95400 4 Stem 416/304/316 304/316 WCB CF8 CF8M C95400 5 Spring 316 …… Feature: Fasten Screw: Effectively prenvent the shaft from traveling,prevent valve work from failing and end from leaking. Body: Short face to f...
-
Top Quality U Type Butterfly Valve - GD Series...
Description: GD Series grooved end butterfly valve is a grooved end bubble tight shutoff butterfly valve with outstanding flow characteristics. The rubber seal is molded onto the ductile iron disc, in order to allow for maximum flow potential. It offers economical, efficient, and reliable service for grooved end piping applications. It is easily installed with two grooved end couplings. Typical application: HVAC, filtering system, etc. Dimensions: Size A B D D1 D2 L H E ...
-
Quality Inspection for Hard Seal Butterfly Valv...
Description: DC Series flanged eccentric butterfly valve incorporates a positive retained resilient disc seal and either an integral body seat. The valve has three unique attributes: less weight, more strength and lower torque. Characteristic: 1. Eccentric action reduces torque and seat contact during operation extending valve life 2. Suitable for on/off and modulating service. 3. Subject to size and damage, the seat can be repaired in the field and in certain cases, repaired from outside the...
-
factory Outlets for Industry Butterfly Valve -...
Description: Comparing to our YD series,flange connection of MD Series wafer butterfly valve is specific,the handle is malleable iron. Working Temperature: •-45℃ to +135℃ for EPDM liner • -12℃ to +82℃ for NBR liner • +10℃ to +150℃ for PTFE liner Material of Main Parts: Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Dimens...
-
New Delivery for Universal Butterfly Valve - M...
Description: Comparing to our YD series,flange connection of MD Series wafer butterfly valve is specific,the handle is malleable iron. Working Temperature: •-45℃ to +135℃ for EPDM liner • -12℃ to +82℃ for NBR liner • +10℃ to +150℃ for PTFE liner Material of Main Parts: Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Dimen...
-
Original Factory Butterfly Valve Factory - YD ...
Description: YD Series Wafer butterfly valve ‘s flange connection is universal standard,and the material of handle is aluminium;It can be used as a device to cut-off or regulate the flow in various medium pipes. Through selecting different materials of disc and seal seat, as well as the pinless connection between disc and stem,the valve can be applied to worse conditions, such as desulphurization vacuum, sea water desalinization. Characteristic: 1. Small in size&light in weight and ...
