Low price for Steel Gate Valve - AZ Series Resilient seated NRS gate valve – TWS Valve
Low price for Steel Gate Valve - AZ Series Resilient seated NRS gate valve – TWS Valve Detail:
Description:
AZ Series Resilient seated NRS gate valve is a wedge gate valve and Non-rising stem type, and suitable for use with water and neutral liquids (sewage) . The non-rising stem design ensures the stem thread is adequately lubricated by the water passing through the valve.
Characteristic:
-On-line replacement of top seal: Easy installation and maintenance.
-Integral rubber-clad disc: The ductile iron frame work is thermal-clad integrally with high performance rubber. Ensuring tight seal and rust prevention.
-Integrated brass nut: By means of special casting process. the brass stem nut is integrated with the disc with secure connection, thus the products is safe and reliable.
-Flat-bottom seat: The sealing surface of the body is flat without hollow, avoiding any dirt deposit.
Application:
Water supply system, water treatment, sewage disposal, food processing, fire protection system, natural gas, liquefied gas system etc.
Dimensions:
| Size mm (inch) | D1 | D2 | D0 | H | L | b | N-Φd | Weight (kg) |
| 65(2.5″) | 139.7(5.5) | 178(7) | 160(6.3) | 256(10.08 | 190.5(7.5) | 17.53(0.69) | 4-19(0.75) | 15 |
| 80(3″) | 152.4(6_) | 190.5(7.5) | 180(7.09) | 275(10.83) | 203.2(8) | 19.05(0.75) | 4-19(0.75) | 20.22 |
| 100(4″) | 190.5(7.5) | 228.6(9) | 200(7.87) | 310(12.2) | 228.6(9) | 23.88(0.94) | 8-19(0.75) | 30.5 |
| 150(6″) | 241.3(9.5) | 279.4(11) | 251(9.88) | 408(16.06) | 266.7(10.5) | 25.4(1) | 8-22(0.88) | 53.75 |
| 200(8″) | 298.5(11.75) | 342.9(13.5) | 286(11.26) | 512(20.16) | 292.1(11.5) | 28.45(1.12) | 8-22(0.88) | 86.33 |
| 250(10″) | 362(14.252) | 406.4(16) | 316(12.441) | 606(23.858) | 330.2(13) | 30.23(1.19) | 12-25.4(1) | 133.33 |
| 300(12″) | 431.8(17) | 482.6(19) | 356(14.06) | 716(28.189) | 355.6(14) | 31.75(1.25) | 12-25.4(1) | 319 |
Product detail pictures:
Related Product Guide:
Low price for Steel Gate Valve - AZ Series Resilient seated NRS gate valve – TWS Valve , The product will supply to all over the world, such as: , , ,
By from -
By from -
Related products
-
China Manufacturer for Motor Operated Butterfly...
Description: DL Series flanged concentric butterfly valve is with centric disc and bonded liner,and have all same common features of other wafer/lug series,these valves are featured by a higher strength of the body and better resistance to pipe pressures as safey factor. Having all same common features of the univisal series, these valves are featured by a higher strength of the body and better resistance to pipe pressures as safety factor. Characteristic: 1. Short Length pattern design 2. V...
-
OEM Factory for Cast Iron Wafer Check Valve - ...
Description: BH Series Dual plate wafer check valve is the cost-effective backflow protection for piping systems,as it is the only fully elastomer-lined insert check valve.The valve body is completely isolated from line media which can extend the service life of this series in most appications and makes it an especially economical alternative in application which would othervise require check valve made of expensive alloys.. Characteristic: -Small in size, light in weight, compact in sturctur...
-
Best Price for China Wafer Butterfly Valve - U...
UD Series soft sleeve seated butterfly valve is Wafer pattern with flanges ,the face to face is EN558-1 20 series as wafer type. Characteristics: 1.Correcting holes are made on flange according to standard, easy correcting during the installation. 2.Through-out bolt or one-side bolt used. Easy replacing and maintenance. 3.The soft sleeve seat can isolate the body from media. Product operation instruction 1. Pipe flange standards should conform to butterfly valve standards; suggest using weldi...
-
Reasonable price for Butterfly Valve Waste Wate...
Description: DL Series flanged concentric butterfly valve is with centric disc and bonded liner,and have all same common features of other wafer/lug series,these valves are featured by a higher strength of the body and better resistance to pipe pressures as safey factor. Having all same common features of the univisal series, these valves are featured by a higher strength of the body and better resistance to pipe pressures as safety factor. Characteristic: 1. Short Length pattern design 2. V...
-
China New Product Demco Valve - GD Series groo...
Description: GD Series grooved end butterfly valve is a grooved end bubble tight shutoff butterfly valve with outstanding flow characteristics. The rubber seal is molded onto the ductile iron disc, in order to allow for maximum flow potential. It offers economical, efficient, and reliable service for grooved end piping applications. It is easily installed with two grooved end couplings. Typical application: HVAC, filtering system, etc. Dimensions: Size A B D D1 D2 L H E ...
-
High definition Knife Gate Valve - WZ Series M...
Description: WZ Series Metal seated NRS gate valve use a ductile iron gate that houses bronze rings to ensure a watertight seal. The non-rising stem design ensures the stem thread is adequately lubricated by the water passing through the valve. Application: Water supply system, water treatment, sewage disposal, food processing, fire protection system, natural gas, liquefied gas system etc. Dimensions: Type DN(mm) L D D1 b Z-Φd H D0 Weight (kg) NRS 40 165 150 110 18 4-Φ19 257 140 10/11 ...
