Hot New Products Flange End Y Type Strainer - TWS Flanged Y Strainer According to ANSI B16.10 – TWS Valve

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

, , ,
Hot New Products Flange End Y Type Strainer - TWS Flanged Y Strainer According to ANSI B16.10 – TWS Valve Detail:

Description:

Y strainers mechanically remove solids from flowing steam, gases or liquid piping systems with the use of a perforated or wire mesh straining screen, and are used to protect equipment. From a simple low pressure cast iron threaded strainer to a large, high pressure special alloy unit with a custom cap design.

Material list: 

Parts Material
Body Cast iron
Bonnet Cast iron
Filtering net Stainless steel

Feature:

Unlike other types of strainers, a Y-Strainer has the advantage of being able to be installed in either a horizontal or vertical position. Obviously, in both cases, the screening element must be on the “down side” of the strainer body so that the entrapped material can properly collect in it.

Some manufactures reduce the size of the Y -Strainer body to save material and cut cost. Before installing a Y-Strainer, be sure it is large enough to properly handle the flow. A low-priced strainer may be an indication of an undersized unit. 

Dimensions:

"

Size Face to face Dimensions. Dimensions Weight
DN(mm) L(mm) D(mm) H(mm) kg
50 203.2 152.4 206 13.69
65 254 177.8 260 15.89
80 260.4 190.5 273 17.7
100 308.1 228.6 322 29.97
125 398.3 254 410 47.67
150 471.4 279.4 478 65.32
200 549.4 342.9 552 118.54
250 654.1 406.4 658 197.04
300 762 482.6 773 247.08

Why Use a Y Strainer?

In general, Y strainers are critical anywhere clean fluids are required. While clean fluids can help maximize the reliability and lifespan of any mechanical system, they’re especially important with solenoid valves. This is because solenoid valves are very sensitive to dirt and will only function properly with clean liquids or air. If any solids enter the stream, it can disrupt and even damage the entire system. Therefore, a Y strainer is a great complimentary component. In addition to protecting the performance of solenoid valves, they also help safeguard other types of mechanical equipment, including:
Pumps
Turbines
Spray nozzles
Heat exchangers
Condensers
Steam traps
Meters
A simple Y strainer can keep these components, which are some of the most valuable and expensive parts of the pipeline, protected from the presences of pipe scale, rust, sediment or any other kind of extraneous debris. Y strainers are available in a myriad of designs (and connection types) that can accommodate any industry or application.

 


Product detail pictures:

Hot New Products Flange End Y Type Strainer - TWS Flanged Y Strainer According to ANSI B16.10 – TWS Valve detail pictures


Related Product Guide:

Hot New Products Flange End Y Type Strainer - TWS Flanged Y Strainer According to ANSI B16.10 – TWS Valve , The product will supply to all over the world, such as: , , ,

  • 5 Stars By from -

    5 Stars By from -
    Write your message here and send it to us

    Related products

    • Professional Design Water Valve - YD Series Wafer butterfly valve – TWS Valve

      Professional Design Water Valve - YD Series Wa...

      Description: YD Series Wafer butterfly valve ‘s flange connection is universal standard,and the material of handle is aluminium;It can be used as a device to cut-off or regulate the flow in various medium pipes. Through selecting different materials of disc and seal seat, as well as the pinless connection between disc and stem,the valve can be applied to worse conditions, such as desulphurization vacuum, sea water desalinization. Characteristic: 1. Small in size&light in weight and ...

    • Manufacturer for Pneumatic Butterfly Valve - ED Series Wafer butterfly valve – TWS Valve

      Manufacturer for Pneumatic Butterfly Valve - E...

      Description: ED Series Wafer butterfly valve is soft sleeve type and can separate the body and fluid medium exactly,. Material of Main Parts:  Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Seat Specification: Material Temperature Use Description NBR -23℃ ~ 82℃ Buna-NBR:(Nitrile Butadiene Rubber ) has good tensile st...

    • Hot-selling Flanged Gate Valve - WZ Series Metal seated OS&Y gate valve – TWS Valve

      Hot-selling Flanged Gate Valve - WZ Series Met...

      Description: WZ Series Metal seated OS&Y gate valve use a ductile iron gate that houses bronze rings to ensure a watertight seal. The OS&Y (Outside Screw and Yoke) gate valve is mainly used in fire protection sprinkler systems. The main difference from a standard NRS (Non Rising Stem) gate valve is that the stem and stem nut are placed outside the valve body. This makes it easy to see if the valve is open or closed, as almost the entire length of the stem is visible when the valve is ...

    • 2021 Good Quality Butterfly Valve Sea Water Desalination - ED Series Wafer butterfly valve – TWS Valve

      2021 Good Quality Butterfly Valve Sea Water Des...

      Description: ED Series Wafer butterfly valve is soft sleeve type and can separate the body and fluid medium exactly,. Material of Main Parts:  Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Seat Specification: Material Temperature Use Description NBR -23℃ ~ 82℃ Buna-NBR:(Nitrile Butadiene Rubber ) has good tensile st...

    • Hot sale Hand Wheel Wafer Butterfly Valve - FD Series Wafer butterfly valve – TWS Valve

      Hot sale Hand Wheel Wafer Butterfly Valve - FD...

      Description: FD Series Wafer butterfly valve with PTFE lined structure, this series resilient seated butterfly valve is designed for corrosive media, especially various kinds of strong acids, such as sulfuric acid and aqua regia. The PTFE material will not pollute media within a pipeline. Characteristic: 1. The butterfly valve comes with two-way installation, zero leakage, corrosion resistance, light weight, small size, low cost and easy installation.2. Tts PTFE clad seat is capable of protec...

    • Chinese wholesale Di/Ci/Ss/Wcb/Al-Bronze Wafer Butterfly Valve - ED Series Wafer butterfly valve – TWS Valve

      Chinese wholesale Di/Ci/Ss/Wcb/Al-Bronze Wafer ...

      Description: ED Series Wafer butterfly valve is soft sleeve type and can separate the body and fluid medium exactly,. Material of Main Parts:  Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Seat Specification: Material Temperature Use Description NBR -23℃ ~ 82℃ Buna-NBR:(Nitrile Butadiene Rubber ) has good tensile s...