High reputation Non-Return Check Valve - BH Series Dual plate wafer check valve – TWS Valve
High reputation Non-Return Check Valve - BH Series Dual plate wafer check valve – TWS Valve Detail:
Description:
BH Series Dual plate wafer check valve is the cost-effective backflow protection for piping systems,as it is the only fully elastomer-lined insert check valve.The valve body is completely isolated from line media which can extend the service life of this series in most appications and makes it an especially economical alternative in application which would othervise require check valve made of expensive alloys..
Characteristic:
-Small in size, light in weight, compact in sturcture, easy in maintenance.-Two torsion springs are added to each of the pair valve plates, which close the plates quickly and automatically.
-The Quick cloth action preventsthe medium from flowing back.
-Short face to face and good rigidity.
-Easy installation, it can be installed on both horizontal and vertival direction pipelines.
-This valve is tighly sealed, without leakage under the water pressure test.
-Safe and reliable in operation, High interference-resistance.
Dimensions:
| Size | A | B | C | D | K | F | G | H | J | E | Weight (kg) | |
| (mm) | (inch) | |||||||||||
| 50 | 2″ | 159 | 101.6 | 84.14 | 66.68 | 52.39 | 120.65 | 19.05 | 28.45 | 47.63 | 53.98 | 2 |
| 65 | 2.5″ | 178 | 120.65 | 98.43 | 79.38 | 52.39 | 139.7 | 19.05 | 36.51 | 58.74 | 53.98 | 2.9 |
| 80 | 3″ | 191 | 133.35 | 115.89 | 92.08 | 52.39 | 152.4 | 19.05 | 41.28 | 69.85 | 53.98 | 3.2 |
| 100 | 4″ | 235 | 171.45 | 142.88 | 117.48 | 61.91 | 190.5 | 19.05 | 53.98 | 87.31 | 63.5 | 6.4 |
| 125 | 5″ | 270 | 193.68 | 171.45 | 144.46 | 65.02 | 215.9 | 22.35 | 67.47 | 112.71 | 66.68 | 7.5 |
| 150 | 6″ | 305 | 222.25 | 200.03 | 171.45 | 77.79 | 241.3 | 22.35 | 80.17 | 141.29 | 79.38 | 10.7 |
| 200 | 8″ | 368 | 269.88 | 254 | 222.25 | 96.84 | 289.45 | 22.35 | 105.57 | 192.09 | 98.43 | 18.5 |
| 250 | 10″ | 429 | 336.55 | 307.98 | 276.23 | 100.01 | 361.95 | 25.4 | 130.18 | 230.19 | 101.6 | 24 |
| 300 | 12″ | 495 | 464 | 365.13 | 327.03 | 128.59 | 431.8 | 25.4 | 158.75 | 274.64 | 130.18 | 41.5 |
| 350 | 14″ | 572 | 447.68 | 396.88 | 358.78 | 177.8 | 476.25 | 28.45 | 171.45 | 306.39 | 180.98 | 63.3 |
| 400 | 16″ | 632 | 511.18 | 450.85 | 409.58 | 158.75 | 539.75 | 28.45 | 196.85 | 355.6 | 161.93 | 73.9 |
| 450 | 18″ | 641 | 546.1 | 508 | 460.37 | 180.97 | 577.85 | 31.75 | 222.25 | 406.14 | 184.15 | 114 |
| 500 | 20″ | 699 | 596.9 | 555.62 | 511.17 | 212.72 | 635 | 31.75 | 247.65 | 469.9 | 215.9 | 165 |
Product detail pictures:
Related Product Guide:
High reputation Non-Return Check Valve - BH Series Dual plate wafer check valve – TWS Valve , The product will supply to all over the world, such as: , , ,
By from -
By from -
Related products
-
OEM China Soft Seated Butterfly Valve - MD Ser...
Description: MD Series Lug type butterfly valve allows downstream pipelines and equipments online repair, and it can be installed on pipe ends as exhaust valve. Alignment features of lugged body allows easy installation between pipeline flanges. a real installationi cost saving, can be installed in the pipe end. Characteristic: 1. Small in size&light in weight and easy maintenance. It can be mounted wherever needed. 2. Simple, compact structure, quick 90 degree on-off operation 3. Disc ha...
-
8 Year Exporter Ansi Cast Iron Swing Check Valv...
Description: BH Series Dual plate wafer check valve is the cost-effective backflow protection for piping systems,as it is the only fully elastomer-lined insert check valve.The valve body is completely isolated from line media which can extend the service life of this series in most appications and makes it an especially economical alternative in application which would othervise require check valve made of expensive alloys.. Characteristic: -Small in size, light in weight, compact in sturctur...
-
Competitive Price for Talis Buterfly Valve - U...
UD Series soft sleeve seated butterfly valve is Wafer pattern with flanges ,the face to face is EN558-1 20 series as wafer type. Characteristics: 1.Correcting holes are made on flange according to standard, easy correcting during the installation. 2.Through-out bolt or one-side bolt used. Easy replacing and maintenance. 3.The soft sleeve seat can isolate the body from media. Product operation instruction 1. Pipe flange standards should conform to butterfly valve standards; suggest using weldi...
-
High Quality for China Swing Check Valve - BH ...
Description: BH Series Dual plate wafer check valve is the cost-effective backflow protection for piping systems,as it is the only fully elastomer-lined insert check valve.The valve body is completely isolated from line media which can extend the service life of this series in most appications and makes it an especially economical alternative in application which would othervise require check valve made of expensive alloys.. Characteristic: -Small in size, light in weight, compact in sturctur...
-
Renewable Design for 316l Butterfly Valve - YD...
Description: YD Series Wafer butterfly valve ‘s flange connection is universal standard,and the material of handle is aluminium;It can be used as a device to cut-off or regulate the flow in various medium pipes. Through selecting different materials of disc and seal seat, as well as the pinless connection between disc and stem,the valve can be applied to worse conditions, such as desulphurization vacuum, sea water desalinization. Characteristic: 1. Small in size&light in weight and ...
-
Reasonable price Water Use Butterfly Valve - M...
Description: MD Series Lug type butterfly valve allows downstream pipelines and equipments online repair, and it can be installed on pipe ends as exhaust valve. Alignment features of lugged body allows easy installation between pipeline flanges. a real installationi cost saving, can be installed in the pipe end. Characteristic: 1. Small in size&light in weight and easy maintenance. It can be mounted wherever needed. 2. Simple, compact structure, quick 90 degree on-off operation 3. Disc ha...
