Good quality Stainless Steel Gate Valve - AZ Series Resilient seated OS&Y gate valve – TWS Valve

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

, , ,
Good quality Stainless Steel Gate Valve - AZ Series Resilient seated OS&Y gate valve – TWS Valve Detail:

Description:

AZ Series Resilient seated NRS gate valve is a wedge gate valve and Rising stem (Outside Screw and Yoke)type, and suitable for use with water and neutral liquids (sewage) . The OS&Y (Outside Screw and Yoke) gate valve is mainly used in fire protection sprinkler systems. The main difference from a standard NRS (Non Rising Stem) gate valve is that the stem and stem nut are placed outside the valve body. This makes it easy to see if the valve is open or closed, as almost the entire length of the stem is visible when the valve is open, while the stem is no longer visible when the valve is closed. In general this is a requirement in these kinds of systems to ensure a fast visual control of the system status..

Features:

Body:No groove design,prevent from impurities,ensure effective sealing.With epoxy coating inside,conform to potable water requirement.

Disc:Metal frame with rubber lined,ensure valve sealing and conform to potable water requirement.

Stem:Made of high strength materials,ensure gate valve easily controlled.

Stem nut:The conection piece of stem and disc,ensure disc easy operating.

Dimensions:

 

20210927163743

Size mm (inch) D1 D2 D0 H H1 L b N-Φd Weight (kg)
65(2.5″) 139.7(5.5) 178(7) 182(7.17) 126(4.96) 190.5(7.5) 190.5(7.5) 17.53(0.69) 4-19(0.75) 25
80(3″) 152.4(6_) 190.5(7.5) 250(9.84) 130(5.12) 203(8) 203.2(8) 19.05(0.75) 4-19(0.75) 31
100(4″) 190.5(7.5) 228.6(9) 250(9.84) 157(6.18) 228.6(9) 228.6(9) 23.88(0.94) 8-19(0.75) 48
150(6″) 241.3(9.5) 279.4(11) 302(11.89) 225(8.86) 266.7(10.5) 266.7(10.5) 25.4(1) 8-22(0.88) 72
200(8″) 298.5(11.75) 342.9(13.5) 345(13.58) 285(11.22) 292(11.5) 292.1(11.5) 28.45(1.12) 8-22(0.88) 132
250(10″) 362(14.252) 406.4(16) 408(16.06) 324(12.760) 330.2(13) 330.2(13) 30.23(1.19) 12-25.4(1) 210
300(12″) 431.8(17) 482.6(19) 483(19.02) 383(15.08) 355.6(14) 355.6(14) 31.75(1.25) 12-25.4(1) 315

Product detail pictures:

Good quality Stainless Steel Gate Valve -  AZ Series Resilient seated OS&Y gate valve – TWS Valve detail pictures

Good quality Stainless Steel Gate Valve -  AZ Series Resilient seated OS&Y gate valve – TWS Valve detail pictures


Related Product Guide:

Good quality Stainless Steel Gate Valve - AZ Series Resilient seated OS&Y gate valve – TWS Valve , The product will supply to all over the world, such as: , , ,

  • 5 Stars By from -

    5 Stars By from -
    Write your message here and send it to us

    Related products

    • Factory wholesale Dn300 Butterfly Valve - MD Series Wafer butterfly valve – TWS Valve

      Factory wholesale Dn300 Butterfly Valve - MD S...

      Description: Comparing to our YD series,flange connection of MD Series wafer butterfly valve is specific,the handle is malleable iron. Working Temperature: •-45℃ to +135℃ for EPDM liner • -12℃ to +82℃ for NBR liner • +10℃ to +150℃ for PTFE liner Material of Main Parts: Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Dimens...

    • Factory wholesale Dn300 Butterfly Valve - MD Series Wafer butterfly valve – TWS Valve

      Factory wholesale Dn300 Butterfly Valve - MD S...

      Description: Comparing to our YD series,flange connection of MD Series wafer butterfly valve is specific,the handle is malleable iron. Working Temperature: •-45℃ to +135℃ for EPDM liner • -12℃ to +82℃ for NBR liner • +10℃ to +150℃ for PTFE liner Material of Main Parts: Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Dimen...

    • Factory Free sample Din 3202 Cast Iron Swing Check Valve - BH Series Dual plate wafer check valve – TWS Valve

      Factory Free sample Din 3202 Cast Iron Swing Ch...

      Description: BH Series Dual plate wafer check valve is the cost-effective backflow protection for piping systems,as it is the only fully elastomer-lined insert check valve.The valve body is completely isolated from line media which can extend the service life of this series in most appications and makes it an especially economical alternative in application which would othervise require check valve made of expensive alloys.. Characteristic: -Small in size, light in weight, compact in sturctur...

    • Manufacturer for Big Size Butterfly Valve - DC Series flanged eccentric butterfly valve – TWS Valve

      Manufacturer for Big Size Butterfly Valve - DC...

      Description: DC Series flanged eccentric butterfly valve incorporates a positive retained resilient disc seal and either an integral body seat. The valve has three unique attributes: less weight, more strength and lower torque. Characteristic: 1. Eccentric action reduces torque and seat contact during operation extending valve life 2. Suitable for on/off and modulating service. 3. Subject to size and damage, the seat can be repaired in the field and in certain cases, repaired from outside the...

    • OEM manufacturer Wcb Swing Check Valve - AH Series Dual plate wafer check valve – TWS Valve

      OEM manufacturer Wcb Swing Check Valve - AH Se...

      Description: Material list: No. Part Material AH      EH BH MH 1 Body CI DI WCB CF8 CF8M C95400 CI DI WCB CF8 CF8M C95400 WCB CF8 CF8M C95400 2 Seat NBR EPDM VITON etc. DI Covered Rubber NBR EPDM VITON etc. 3 Disc DI C95400 CF8 CF8M DI C95400 CF8 CF8M WCB CF8 CF8M C95400 4 Stem 416/304/316 304/316 WCB CF8 CF8M C95400 5 Spring 316 …… Feature: Fasten Screw: Effectively prenvent the shaft from traveling,prevent valve work from failing and end from leaking. Body: Short face to f...

    • China OEM Rubber Seated Butterfly Valve - DC Series flanged eccentric butterfly valve – TWS Valve

      China OEM Rubber Seated Butterfly Valve - DC S...

      Description: DC Series flanged eccentric butterfly valve incorporates a positive retained resilient disc seal and either an integral body seat. The valve has three unique attributes: less weight, more strength and lower torque. Characteristic: 1. Eccentric action reduces torque and seat contact during operation extending valve life 2. Suitable for on/off and modulating service. 3. Subject to size and damage, the seat can be repaired in the field and in certain cases, repaired from outside the...