Good quality Iron Check Valve - BH Series Dual plate wafer check valve – TWS Valve
Good quality Iron Check Valve - BH Series Dual plate wafer check valve – TWS Valve Detail:
Description:
BH Series Dual plate wafer check valve is the cost-effective backflow protection for piping systems,as it is the only fully elastomer-lined insert check valve.The valve body is completely isolated from line media which can extend the service life of this series in most appications and makes it an especially economical alternative in application which would othervise require check valve made of expensive alloys..
Characteristic:
-Small in size, light in weight, compact in sturcture, easy in maintenance.-Two torsion springs are added to each of the pair valve plates, which close the plates quickly and automatically.
-The Quick cloth action preventsthe medium from flowing back.
-Short face to face and good rigidity.
-Easy installation, it can be installed on both horizontal and vertival direction pipelines.
-This valve is tighly sealed, without leakage under the water pressure test.
-Safe and reliable in operation, High interference-resistance.
Dimensions:
| Size | A | B | C | D | K | F | G | H | J | E | Weight (kg) | |
| (mm) | (inch) | |||||||||||
| 50 | 2″ | 159 | 101.6 | 84.14 | 66.68 | 52.39 | 120.65 | 19.05 | 28.45 | 47.63 | 53.98 | 2 |
| 65 | 2.5″ | 178 | 120.65 | 98.43 | 79.38 | 52.39 | 139.7 | 19.05 | 36.51 | 58.74 | 53.98 | 2.9 |
| 80 | 3″ | 191 | 133.35 | 115.89 | 92.08 | 52.39 | 152.4 | 19.05 | 41.28 | 69.85 | 53.98 | 3.2 |
| 100 | 4″ | 235 | 171.45 | 142.88 | 117.48 | 61.91 | 190.5 | 19.05 | 53.98 | 87.31 | 63.5 | 6.4 |
| 125 | 5″ | 270 | 193.68 | 171.45 | 144.46 | 65.02 | 215.9 | 22.35 | 67.47 | 112.71 | 66.68 | 7.5 |
| 150 | 6″ | 305 | 222.25 | 200.03 | 171.45 | 77.79 | 241.3 | 22.35 | 80.17 | 141.29 | 79.38 | 10.7 |
| 200 | 8″ | 368 | 269.88 | 254 | 222.25 | 96.84 | 289.45 | 22.35 | 105.57 | 192.09 | 98.43 | 18.5 |
| 250 | 10″ | 429 | 336.55 | 307.98 | 276.23 | 100.01 | 361.95 | 25.4 | 130.18 | 230.19 | 101.6 | 24 |
| 300 | 12″ | 495 | 464 | 365.13 | 327.03 | 128.59 | 431.8 | 25.4 | 158.75 | 274.64 | 130.18 | 41.5 |
| 350 | 14″ | 572 | 447.68 | 396.88 | 358.78 | 177.8 | 476.25 | 28.45 | 171.45 | 306.39 | 180.98 | 63.3 |
| 400 | 16″ | 632 | 511.18 | 450.85 | 409.58 | 158.75 | 539.75 | 28.45 | 196.85 | 355.6 | 161.93 | 73.9 |
| 450 | 18″ | 641 | 546.1 | 508 | 460.37 | 180.97 | 577.85 | 31.75 | 222.25 | 406.14 | 184.15 | 114 |
| 500 | 20″ | 699 | 596.9 | 555.62 | 511.17 | 212.72 | 635 | 31.75 | 247.65 | 469.9 | 215.9 | 165 |
Product detail pictures:
Related Product Guide:
Good quality Iron Check Valve - BH Series Dual plate wafer check valve – TWS Valve , The product will supply to all over the world, such as: , , ,
By from -
By from -
Related products
-
2021 Latest Design Stainless Steel Valve - MD ...
Description: Comparing to our YD series,flange connection of MD Series wafer butterfly valve is specific,the handle is malleable iron. Working Temperature: •-45℃ to +135℃ for EPDM liner • -12℃ to +82℃ for NBR liner • +10℃ to +150℃ for PTFE liner Material of Main Parts: Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Dimens...
-
Low price for Water Butterfly Valve - MD Serie...
Description: Comparing to our YD series,flange connection of MD Series wafer butterfly valve is specific,the handle is malleable iron. Working Temperature: •-45℃ to +135℃ for EPDM liner • -12℃ to +82℃ for NBR liner • +10℃ to +150℃ for PTFE liner Material of Main Parts: Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Dimen...
-
Chinese wholesale Di/Ci/Ss/Wcb/Al-Bronze Wafer ...
UD Series soft sleeve seated butterfly valve is Wafer pattern with flanges ,the face to face is EN558-1 20 series as wafer type. Characteristics: 1.Correcting holes are made on flange according to standard, easy correcting during the installation. 2.Through-out bolt or one-side bolt used. Easy replacing and maintenance. 3.The soft sleeve seat can isolate the body from media. Product operation instruction 1. Pipe flange standards should conform to butterfly valve standards; suggest using weldi...
-
2021 Latest Design Cast Steel Butterfly Valve -...
UD Series soft sleeve seated butterfly valve is Wafer pattern with flanges ,the face to face is EN558-1 20 series as wafer type. Characteristics: 1.Correcting holes are made on flange according to standard, easy correcting during the installation. 2.Through-out bolt or one-side bolt used. Easy replacing and maintenance. 3.The soft sleeve seat can isolate the body from media. Product operation instruction 1. Pipe flange standards should conform to butterfly valve standards; suggest using weldi...
-
Factory source Disc Plate Wafer Check Valve - ...
Description: EH Series Dual plate wafer check valve is with two torsion springs added to each of pair valve plates, which close the plates quickly and automatically, that can prevent the medium from flowing back.The check valve can be installed on both horizontal and vertical direction pipelines. Characteristic: -Small in size, light in weight, compact in sturcture, easy in maintenance. -Two torsion springs are added to each of the pair valve plates, which close the plates quickly and automat...
-
Wholesale Discount High Temperature Butterfly V...
Description: MD Series Lug type butterfly valve allows downstream pipelines and equipments online repair, and it can be installed on pipe ends as exhaust valve. Alignment features of lugged body allows easy installation between pipeline flanges. a real installationi cost saving, can be installed in the pipe end. Characteristic: 1. Small in size&light in weight and easy maintenance. It can be mounted wherever needed. 2. Simple, compact structure, quick 90 degree on-off operation 3. Disc ha...
