Good Quality Back Flow Preventer – Flanged Backflow Preventer – TWS Valve

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

, , ,
Good Quality Back Flow Preventer – Flanged Backflow Preventer – TWS Valve Detail:

Description:

Slight resistance Non-return Backflow Preventer (Flanged Type) TWS-DFQ4TX-10/16Q-D – is a kind of water control combination device developed by our company, mainly used for water supply from urban unit to the general sewage unit strictly limit the pipeline pressure so that the water flow can only be one-way. Its function is to prevent the backflow of the pipeline medium or any condition siphon flow back, in order to avoid backflow pollution.

Characteristics:

1. It is of compact and short structure; slight resistance; water-saving (no abnormal drain phenomenon at the normal water supply pressure fluctuation); safe (in abnormal loss of pressure in the upstream pressure water supply system, the drain valve can be open timely, emptying, and the middle cavity of backflow preventer always takes precedence over the upstream in air partition); on-line detection and maintenance etc. Under normal work in economic flow rate, water damage of product designis 1.8~ 2.5 m.

2. Two levels check valve’ s wide valve cavity flow design is of small flow resistance, rapidly on-off seals of check valve, which can effectively prevent damages to the valve and pipe by sudden high back pressure, with mute function, effectively extending the service life of the valve.

3. Accurate design of drain valve, drain pressure can adjust the pressure fluctuation value of cut off water supply system, to avoid the interference of the system pressure fluctuations. On-off safely and reliably, no abnormal water leakage.

4. Large diaphragm control cavity design makes the reliability of the key parts is better than that of other backlow preventer, safely and reliably on-off for drain valve.

5. The combined structure of large diameter drain opening and diversion channel, complementary intake and drainage in the valve cavity have no drainage problems, completely limit the possibility of back down stream and siphon flow reversals occur.

6. Humanized design can be online test and maintenance.

Applications:

It can be used in harmful pollution and light pollution,for toxic pollution,it is also used if it cann’t prevent backflow by air isolation;
It can be used in source of branch pipe in harmful pollution and continuous pressure flow,and not used in preventing backlow of
toxic pollution.

Dimensions:

xdaswd


Product detail pictures:

Good Quality Back Flow Preventer – Flanged Backflow Preventer – TWS Valve detail pictures

Good Quality Back Flow Preventer – Flanged Backflow Preventer – TWS Valve detail pictures

Good Quality Back Flow Preventer – Flanged Backflow Preventer – TWS Valve detail pictures


Related Product Guide:

Good Quality Back Flow Preventer – Flanged Backflow Preventer – TWS Valve , The product will supply to all over the world, such as: , , ,

  • 5 Stars By from -

    5 Stars By from -
    Write your message here and send it to us

    Related products

    • Reliable Supplier Wafer Lug Butterfly Valve - ED Series Wafer butterfly valve – TWS Valve

      Reliable Supplier Wafer Lug Butterfly Valve - ...

      Description: ED Series Wafer butterfly valve is soft sleeve type and can separate the body and fluid medium exactly,. Material of Main Parts:  Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Seat Specification: Material Temperature Use Description NBR -23℃ ~ 82℃ Buna-NBR:(Nitrile Butadiene Rubber ) has good tensile s...

    • OEM Factory for Big Gate Valve - WZ Series Metal seated NRS gate valve – TWS Valve

      OEM Factory for Big Gate Valve - WZ Series Met...

      Description: WZ Series Metal seated NRS gate valve use a ductile iron gate that houses bronze rings to ensure a watertight seal. The non-rising stem design ensures the stem thread is adequately lubricated by the water passing through the valve. Application: Water supply system, water treatment, sewage disposal, food processing, fire protection system, natural gas, liquefied gas system etc. Dimensions: Type DN(mm) L D D1 b Z-Φd H D0 Weight (kg) NRS 40 165 150 110 18 4-Φ19 257 140 10/11 ...

    • PriceList for Nylon Bushing Butterfly Valve In Wafer - UD Series hard-seated butterfly valve – TWS Valve

      PriceList for Nylon Bushing Butterfly Valve In ...

      Description: UD Series hard seated butterfly valve is Wafer pattern with flanges ,the face to face is EN558-1 20 series as wafer type. Material of Main Parts: Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Characteristics: 1.Correcting holes are made on flange according to standard, easy correcting during the installation...

    • Cheap PriceList for Pneumatic Stainless Steel Butterfly Valve - MD Series Wafer butterfly valve – TWS Valve

      Cheap PriceList for Pneumatic Stainless Steel B...

      Description: Comparing to our YD series,flange connection of MD Series wafer butterfly valve is specific,the handle is malleable iron. Working Temperature: •-45℃ to +135℃ for EPDM liner • -12℃ to +82℃ for NBR liner • +10℃ to +150℃ for PTFE liner Material of Main Parts: Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Dimen...

    • OEM Manufacturer Tomoe Butterfly Valve - UD Series hard-seated butterfly valve – TWS Valve

      OEM Manufacturer Tomoe Butterfly Valve - UD Se...

      Description: UD Series hard seated butterfly valve is Wafer pattern with flanges ,the face to face is EN558-1 20 series as wafer type. Material of Main Parts: Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Characteristics: 1.Correcting holes are made on flange according to standard, easy correcting during the installation...

    • OEM/ODM Manufacturer Api 594 Check Valve - EH Series Dual plate wafer check valve – TWS Valve

      OEM/ODM Manufacturer Api 594 Check Valve - EH ...

      Description: EH Series Dual plate wafer check valve is with two torsion springs added to each of pair valve plates, which close the plates quickly and automatically, that can prevent the medium from flowing back.The check valve can be installed on both horizontal and vertical direction pipelines. Characteristic: -Small in size, light in weight, compact in sturcture, easy in maintenance. -Two torsion springs are added to each of the pair valve plates, which close the plates quickly and automat...