Factory wholesale Renewable Seat Gate Valve - EZ Series Resilient seated NRS gate valve – TWS Valve
Factory wholesale Renewable Seat Gate Valve - EZ Series Resilient seated NRS gate valve – TWS Valve Detail:
Description:
EZ Series Resilient seated NRS gate valve is a wedge gate valve and Non-rising stem type, and suitable for use with water and neutral liquids (sewage).
Characteristic:
-On-line replacement of top seal: Easy installation and maintenance.
-Integral rubber-clad disc: The ductile iron frame work is thermal-clad integrally with high performance rubber. Ensuring tight seal and rust prevention.
-Integrated brass nut: By means of special casting process. the brass stem nut is integrated with the disc with secure connection, thus the products is safe and reliable.
-Flat-bottom seat: The sealing surface of the body is flat without hollow, avoiding any dirt deposit.
-Whollly-through flow channel: the whole flow channel is through, giving “Zero” pressure loss.
-Dependable top sealing: with multi-O ring structure adopted, the sealing is dependable.
-Epoxy resin coating: the cast is sprayed with epoxy resin coat both inside and outside, and the dics is wholly clad with rubber in accordance with food hygiene requirement, so it is safe and resistant to corrosion.
Application:
Water supply system, water treatment, sewage disposal, food processing, fire protection system, natural gas, liquefied gas system etc.
Dimensions:
| DN | L | D | D1 | b | N-d0 | H | D0 | Weight(kg) | |||||||
| F4 | F5 | 5163 | 10 | 16 | 10 | 16 | 10 | 16 | 10 | 16 | 10 | 16 | |||
| 50(2″) | 150 | 250 | 178 | 165 | 125 | 19 | 4-19 | 249 | 180 | 10 | 11 | ||||
| 65(2.5″) | 170 | 270 | 190 | 185 | 145 | 19 | 4-19 | 274 | 180 | 13 | 14 | ||||
| 80(3″) | 180 | 280 | 203 | 200 | 160 | 18-19 | 8-19 | 310 | 200 | 23 | 24 | ||||
| 100(4″) | 190 | 300 | 229 | 220 | 180 | 18-19 | 8-19 | 338 | 240 | 25 | 26 | ||||
| 125(5″) | 200 | 325 | 254 | 250 | 210 | 18 | 8-19 | 406 | 300 | 33 | 35 | ||||
| 150(6″) | 210 | 350 | 267 | 285 | 240 | 19 | 8-23 | 470 | 300 | 42 | 44 | ||||
| 200(8″) | 230 | 400 | 292 | 340 | 295 | 20 | 8-23 | 12-23 | 560 | 350 | 76 | 80 | |||
| 250(10″) | 250 | 450 | 330 | 395 | 405 | 350 | 355 | 22 | 12-23 | 12-28 | 642 | 350 | 101 | 116 | |
| 300(12″) | 270 | 500 | 356 | 445 | 460 | 400 | 410 | 24 | 22 | 12-23 | 12-28 | 740 | 400 | 136 | 156 |
| 350(14″) | 290 | 550 | 381 | 505 | 520 | 460 | 470 | 25 | 16-23 | 16-25 | 802 | 450 | 200 | 230 | |
| 400(16″) | 310 | 600 | 406 | 565 | 580 | 515 | 525 | 28 | 16-25 | 16-30 | 907 | 450 | 430 | 495 | |
| 450(18″) | 330 | 650 | 432 | 615 | 640 | 565 | 585 | 29 | 20-25 | 20-30 | 997 | 620 | 450 | 518 | |
| 500(20″) | 350 | 700 | 457 | 670 | 715 | 620 | 650 | 31 | 20-25 | 20-34 | 1110 | 620 | 480 | 552 | |
| 600(24″) | 390 | 800 | 508 | 780 | 840 | 725 | 770 | 33 | 20-30 | 20-41 | 1288 | 620 | 530 | 610 | |
Product detail pictures:
Related Product Guide:
Factory wholesale Renewable Seat Gate Valve - EZ Series Resilient seated NRS gate valve – TWS Valve , The product will supply to all over the world, such as: , , ,
By from -
By from -
Related products
-
Well-designed Butterfly Valves Dn250 - MD Seri...
Description: Comparing to our YD series,flange connection of MD Series wafer butterfly valve is specific,the handle is malleable iron. Working Temperature: •-45℃ to +135℃ for EPDM liner • -12℃ to +82℃ for NBR liner • +10℃ to +150℃ for PTFE liner Material of Main Parts: Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Dimen...
-
100% Original Ductile Iron Swing Check Valve -...
Description: BH Series Dual plate wafer check valve is the cost-effective backflow protection for piping systems,as it is the only fully elastomer-lined insert check valve.The valve body is completely isolated from line media which can extend the service life of this series in most appications and makes it an especially economical alternative in application which would othervise require check valve made of expensive alloys.. Characteristic: -Small in size, light in weight, compact in sturctur...
-
factory Outlets for Industry Butterfly Valve -...
Description: MD Series Lug type butterfly valve allows downstream pipelines and equipments online repair, and it can be installed on pipe ends as exhaust valve. Alignment features of lugged body allows easy installation between pipeline flanges. a real installationi cost saving, can be installed in the pipe end. Characteristic: 1. Small in size&light in weight and easy maintenance. It can be mounted wherever needed. 2. Simple, compact structure, quick 90 degree on-off operation 3. Disc ha...
-
OEM China En558-1 Check Valve - AH Series Dual...
Description: Material list: No. Part Material AH EH BH MH 1 Body CI DI WCB CF8 CF8M C95400 CI DI WCB CF8 CF8M C95400 WCB CF8 CF8M C95400 2 Seat NBR EPDM VITON etc. DI Covered Rubber NBR EPDM VITON etc. 3 Disc DI C95400 CF8 CF8M DI C95400 CF8 CF8M WCB CF8 CF8M C95400 4 Stem 416/304/316 304/316 WCB CF8 CF8M C95400 5 Spring 316 …… Feature: Fasten Screw: Effectively prenvent the shaft from traveling,prevent valve work from failing and end from leaking. Body: Short face to f...
-
OEM/ODM China Industrial Check Valve - RH Seri...
Description: RH Series Rubber seated swing check valve is simple, durable and exhibits improved design features over that of traditional metal-seated swing check valves. The disc and shaft are fully encapsulated with EPDM rubber to create the valve’s only moving part Characteristic: 1. Small in size&light in weight and easy maintenance. It can be mounted wherever needed. 2. Simple, compact structure, quick 90 degree on-off operation 3. Disc has two-way bearing, perfect seal, without leaka...
-
OEM/ODM China Gate Valve Handwheel - EZ Series...
Description: EZ Series Resilient seated NRS gate valve is a wedge gate valve and Non-rising stem type, and suitable for use with water and neutral liquids (sewage). Characteristic: -On-line replacement of top seal: Easy installation and maintenance. -Integral rubber-clad disc: The ductile iron frame work is thermal-clad integrally with high performance rubber. Ensuring tight seal and rust prevention. -Integrated brass nut: By means of special casting process. the brass stem nut is integrated ...
