Factory wholesale Honeywell Butterfly Valve - MD Series Wafer butterfly valve – TWS Valve
Factory wholesale Honeywell Butterfly Valve - MD Series Wafer butterfly valve – TWS Valve Detail:
Description:
Comparing to our YD series,flange connection of MD Series wafer butterfly valve is specific,the handle is malleable iron.
Working Temperature:
•-45℃ to +135℃ for EPDM liner
• -12℃ to +82℃ for NBR liner
• +10℃ to +150℃ for PTFE liner
Material of Main Parts:
| Parts | Material |
| Body | CI,DI,WCB,ALB,CF8,CF8M |
| Disc | DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel |
| Stem | SS416,SS420,SS431,17-4PH |
| Seat | NBR,EPDM,Viton,PTFE |
| Taper Pin | SS416,SS420,SS431,17-4PH |
Dimension:
| Size | A | B | C | D | L | H | D1 | n-Φ | K | E | n1-Φ1 | Φ2 | G | n2-M | f | j | X | Weight (kg) | |
| (mm) | (inch) | ||||||||||||||||||
| 40 | 1.5 | 136 | 69 | 33 | 42.6 | 28 | 77.77 | 110 | 4-18 | 77 | 50 | 4-6.7 | 12.6 | 100 | ─ | 13 | 13.8 | 3 | 2.3 |
| 50 | 2 | 161 | 80 | 43 | 52.9 | 28 | 84.84 | 120 | 4-23 | 77 | 57.15 | 4-6.7 | 12.6 | 100 | ─ | 13 | 13.8 | 3 | 2.8 |
| 65 | 2.5 | 175 | 89 | 46 | 64.5 | 28 | 96.2 | 136.2 | 4-26.5 | 77 | 57.15 | 4-6.7 | 12.6 | 120 | ─ | 13 | 13.8 | 3 | 3.5 |
| 80 | 3 | 181 | 95 | 45.21 | 78.8 | 28 | 61.23 | 160 | 8-18 | 77 | 57.15 | 4-6.7 | 12.6 | 127 | ─ | 13 | 13.8 | 3 | 3.7 |
| 100 | 4 | 200 | 114 | 52.07 | 104 | 28 | 70.8 | 185 | 4-24.5 | 92 | 69.85 | 4-10.3 | 15.77 | 156 | ─ | 13 | 17.77 | 5 | 5.4 |
| 125 | 5 | 213 | 127 | 55.5 | 123.3 | 28 | 82.28 | 215 | 4-23 | 92 | 69.85 | 4-10.3 | 18.92 | 190 | ─ | 13 | 20.92 | 5 | 7.7 |
| 150 | 6 | 226 | 139 | 55.75 | 155.6 | 28 | 91.08 | 238 | 4-25 | 92 | 69.85 | 4-10.3 | 18.92 | 212 | ─ | 13 | 20.92 | 5 | 9.3 |
| 200 | 8 | 260 | 175 | 60.58 | 202.5 | 38 | 112.89/76.35 | 295 | 4-25/4-23 | 115 | 88.9 | 4-14.3 | 22.1 | 268 | ─ | 13 | 24.1 | 5 | 14.5 |
| 250 | 10 | 292 | 203 | 68 | 250.5 | 38 | 92.4 | 357 | 4-29/4-29 | 115 | 88.9 | 4-14.3 | 28.45 | 325 | ─ | 13 | 31.45 | 8 | 23 |
| 300 | 12 | 337 | 242 | 76.9 | 301.6 | 38 | 105.34 | 407 | 4-30 | 140 | 107.95 | 4-14.3 | 31.6 | 403 | ─ | 20 | 34.6 | 8 | 36 |
| 350 | 14 | 368 | 267 | 76.5 | 333.3 | 45 | 91.11 | 467 | 4-26/4-30 | 140 | 107.95 | 4-14.3 | 31.6 | 436 | ─ | 20 | 34.6 | 8 | 45 |
| 400 | 16 | 400 | 325 | 85.7 | 389.6 | 51/60 | 100.47/102.425 | 515/525 | 4-26/4-30 | 197 | 158.75 | 4-20.6 | 33.15 | 488 | ─ | 20 | 36.15 | 10 | 65 |
| 450 | 18 | 422 | 345 | 104.6 | 440.51 | 51/60 | 88.39/91.51 | 565/585 | 4-26/4-33 | 197 | 158.75 | 4-20.6 | 37.95 | 536 | ─ | 20 | 41 | 10 | 86 |
| 500 | 20 | 480 | 378 | 130.28 | 491.6 | 57/75 | 86.99/101.68 | 620/650 | 20-30/20-36 | 197 | 158.75 | 4-20.6 | 41.15 | 590 | ─ | 22 | 44.15 | 10 | 113 |
| 600 | 24 | 562 | 475 | 151.36 | 592.5 | 70/75 | 113.42/120.46 | 725/770 | 24-30/24-33 | 276 | 215.9 | 4-22.2 | 50.65 | 816 | ─ | 22 | 54.65 | 16 | 209 |
| 700 | 28 | 624 | 535 | 163 | 695 | 66 | 109.65 | 840 | 24-30 | 300 | 254 | 8-18 | 63.35 | 895 | ─ | 30 | 71.4 | 18 | 292 |
| 800 | 32 | 672 | 606 | 188 | 794.7 | 66 | 124 | 950 | 24-33 | 300 | 254 | 8-18 | 63.35 | 1015 | ─ | 30 | 71.4 | 18 | 396 |
| 900 | 36 | 720 | 670 | 203 | 870 | 118 | 117.57 | 1050 | 24-33 | 300 | 254 | 8-18 | 75 | 1115 | 4-M30 | 34 | 84 | 20 | 520 |
| 1000 | 40 | 800 | 735 | 216 | 970 | 142 | 129.89 | 1160 | 24-36 | 300 | 254 | 8-18 | 85 | 1230 | 4-M33 | 35 | 95 | 22 | 668 |
| 1200 | 48 | 941 | 878 | 254 | 1160 | 150 | 101.5 | 1380 | 32-39 | 350 | 298 | 8-22 | 105 | 1455 | 4-M36 | 35 | 117 | 28 | 1080 |
Product detail pictures:
Related Product Guide:
Factory wholesale Honeywell Butterfly Valve - MD Series Wafer butterfly valve – TWS Valve , The product will supply to all over the world, such as: , , ,
By from -
By from -
Related products
-
Factory directly Pneumatic Dust Butterfly Valve...
UD Series soft sleeve seated butterfly valve is Wafer pattern with flanges ,the face to face is EN558-1 20 series as wafer type. Characteristics: 1.Correcting holes are made on flange according to standard, easy correcting during the installation. 2.Through-out bolt or one-side bolt used. Easy replacing and maintenance. 3.The soft sleeve seat can isolate the body from media. Product operation instruction 1. Pipe flange standards should conform to butterfly valve standards; suggest using weld...
-
2021 China New Design Flow Check Valve - BH Se...
Description: BH Series Dual plate wafer check valve is the cost-effective backflow protection for piping systems,as it is the only fully elastomer-lined insert check valve.The valve body is completely isolated from line media which can extend the service life of this series in most appications and makes it an especially economical alternative in application which would othervise require check valve made of expensive alloys.. Characteristic: -Small in size, light in weight, compact in sturctur...
-
Professional China Hydraulic Balancing Valve -...
Description: TWS Flanged Static balancing valve is a key hydraulic balance product used for precise flow regulating of water pipelines system in HVAC application to ensure static hydraulic balance across whole water system. The series can ensure the actual flow of each terminal equipment and pipeline in line with the design flow in the phase of system initial commisiioning by site commissiong with flow measuring computer. The series are widely used in main pipes, branch pipes and terminal eq...
-
Wholesale Price China Cooling Water Butterfly V...
UD Series soft sleeve seated butterfly valve is Wafer pattern with flanges ,the face to face is EN558-1 20 series as wafer type. Characteristics: 1.Correcting holes are made on flange according to standard, easy correcting during the installation. 2.Through-out bolt or one-side bolt used. Easy replacing and maintenance. 3.The soft sleeve seat can isolate the body from media. Product operation instruction 1. Pipe flange standards should conform to butterfly valve standards; suggest using weldi...
-
High reputation Butterfly Valves Ductile Iron -...
UD Series soft sleeve seated butterfly valve is Wafer pattern with flanges ,the face to face is EN558-1 20 series as wafer type. Characteristics: 1.Correcting holes are made on flange according to standard, easy correcting during the installation. 2.Through-out bolt or one-side bolt used. Easy replacing and maintenance. 3.The soft sleeve seat can isolate the body from media. Product operation instruction 1. Pipe flange standards should conform to butterfly valve standards; suggest using weldi...
-
China Gold Supplier for Wafer Type Worm Gear Bu...
Description: Comparing to our YD series,flange connection of MD Series wafer butterfly valve is specific,the handle is malleable iron. Working Temperature: •-45℃ to +135℃ for EPDM liner • -12℃ to +82℃ for NBR liner • +10℃ to +150℃ for PTFE liner Material of Main Parts: Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Dimen...
