Factory wholesale Honeywell Butterfly Valve - ED Series Wafer butterfly valve – TWS Valve

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

, , ,
Factory wholesale Honeywell Butterfly Valve - ED Series Wafer butterfly valve – TWS Valve Detail:

Description:

ED Series Wafer butterfly valve is soft sleeve type and can separate the body and fluid medium exactly,.

Material of Main Parts: 

Parts Material
Body CI,DI,WCB,ALB,CF8,CF8M
Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel
Stem SS416,SS420,SS431,17-4PH
Seat NBR,EPDM,Viton,PTFE
Taper Pin SS416,SS420,SS431,17-4PH

Seat Specification:

Material Temperature Use Description
NBR -23℃ ~ 82℃ Buna-NBR:(Nitrile Butadiene Rubber ) has good tensile strength and resistance to abrasion.It is also resistant to hydrocarbon products.It is a good general-service material for use in water,vacuum,acid,salts,alkalines,fats,oils,greases,hydraulic oils and ethylene glycol. Buna-N can not use for acetone,ketones and nitrated or chlorinated hydrocarbons.
Shot time-23℃ ~120℃
EPDM -20 ℃~130℃ General EPDM rubber: is a good general-service synthetic rubber used in hot-water, drinks, milk product systems and those containing ketones, alcohol, nitric ether esters and glycerol. But EPDM can not use for hydrocarbon based oils, minerals or solvents.
Shot time-30℃ ~ 150℃
Viton -10 ℃~ 180℃ Viton is a fluorinated hydrocarbon elastomer with excellent resistance to most hydrocarbon oils and gases and other petroleum-based products. Viton can not use for steam service, hot water over 82℃ or concentrated alkalines.
PTFE -5℃ ~ 110℃ PTFE has good chemical performance stability and surface will be not sticky.At the same time, it has good lubricity property and aging resistance. It is a good material for use in acids, alkalis, oxidant and other corrodents.
(Inner liner EDPM)
PTFE -5℃~90℃
(Inner liner NBR)

Operation:lever,gearbox,electrical actuator,pneumatic actuator.

Characteristics:

1.Stem head design of Double “D” or Square cross:Convenient to connect with various actuators,deliver more torque;

2.Two piece stem square driver:No-space connection applies to any poor conditions;

3.Body without Frame structure:The seat can separate the body and fluid medium exactly,and convenient with pipe flange.

Dimension:

20210927171813


Product detail pictures:

Factory wholesale Honeywell Butterfly Valve - ED Series Wafer butterfly valve – TWS Valve detail pictures


Related Product Guide:

Factory wholesale Honeywell Butterfly Valve - ED Series Wafer butterfly valve – TWS Valve , The product will supply to all over the world, such as: , , ,

  • 5 Stars By from -

    5 Stars By from -
    Write your message here and send it to us

    Related products

    • Hot New Products Ptfe Seat Butterfly Valve - DC Series flanged eccentric butterfly valve – TWS Valve

      Hot New Products Ptfe Seat Butterfly Valve - D...

      Description: DC Series flanged eccentric butterfly valve incorporates a positive retained resilient disc seal and either an integral body seat. The valve has three unique attributes: less weight, more strength and lower torque. Characteristic: 1. Eccentric action reduces torque and seat contact during operation extending valve life 2. Suitable for on/off and modulating service. 3. Subject to size and damage, the seat can be repaired in the field and in certain cases, repaired from outside the...

    • OEM/ODM Manufacturer Non Rising Stem Metal Seated Gate Valve -  EZ Series Resilient seated OS&Y gate valve – TWS Valve

      OEM/ODM Manufacturer Non Rising Stem Metal Seat...

      Description: EZ Series Resilient seated OS&Y gate valve is a wedge gate valve and Rising stem type, and suitable for use with water and neutral liquids (sewage). Material: Parts Material Body Cast iron,Ductile iron Disc Ductilie iron&EPDM Stem SS416,SS420,SS431 Bonnet Cast iron,Ductile iron Stem nut Bronze  Pressure test:  Nominal pressure PN10 PN16 Test pressure Shell 1.5 Mpa 2.4 Mpa Sealing 1.1 Mpa 1.76 Mpa Operation: 1. Manual actuation In most cases,resi...

    • OEM Supply Double Flanged Gate Valve - WZ Series Metal seated OS&Y gate valve – TWS Valve

      OEM Supply Double Flanged Gate Valve - WZ Seri...

      Description: WZ Series Metal seated OS&Y gate valve use a ductile iron gate that houses bronze rings to ensure a watertight seal. The OS&Y (Outside Screw and Yoke) gate valve is mainly used in fire protection sprinkler systems. The main difference from a standard NRS (Non Rising Stem) gate valve is that the stem and stem nut are placed outside the valve body. This makes it easy to see if the valve is open or closed, as almost the entire length of the stem is visible when the valve is ...

    • Good Quality Dual Plate Check Valve - RH Series Rubber seated swing check valve – TWS Valve

      Good Quality Dual Plate Check Valve - RH Serie...

      Description: RH Series Rubber seated swing check valve is simple, durable and exhibits improved design features over that of traditional metal-seated swing check valves. The disc and shaft are fully encapsulated with EPDM rubber to create the valve’s only moving part Characteristic: 1. Small in size&light in weight and easy maintenance. It can be mounted wherever needed. 2. Simple, compact structure, quick 90 degree on-off operation 3. Disc has two-way bearing, perfect seal, without leaka...

    • OEM/ODM Manufacturer Cast Iron Wafer Double Stem Butterfly Valve - MD Series Lug butterfly valve – TWS Valve

      OEM/ODM Manufacturer Cast Iron Wafer Double Ste...

      Description: MD Series Lug type butterfly valve allows downstream pipelines and equipments online repair, and it can be installed on pipe ends as exhaust valve. Alignment features of lugged body allows easy installation between pipeline flanges. a real installationi cost saving, can be installed in the pipe end. Characteristic: 1. Small in size&light in weight and easy maintenance. It can be mounted wherever needed. 2. Simple, compact structure, quick 90 degree on-off operation 3. Disc ha...

    • Factory Price Butterfly Valve With Electric Actuator - DL Series flanged concentric butterfly valve – TWS Valve

      Factory Price Butterfly Valve With Electric Act...

      Description: DL Series flanged concentric butterfly valve is with centric disc and bonded liner,and have all same common features of other wafer/lug series,these valves are featured by a higher strength of the body and better resistance to pipe pressures as safey factor. Having all same common features of the univisal series, these valves are featured by a higher strength of the body and better resistance to pipe pressures as safety factor.  Characteristic: 1. Short Length pattern design 2. V...