Factory source Disc Plate Wafer Check Valve - BH Series Dual plate wafer check valve – TWS Valve
Factory source Disc Plate Wafer Check Valve - BH Series Dual plate wafer check valve – TWS Valve Detail:
Description:
BH Series Dual plate wafer check valve is the cost-effective backflow protection for piping systems,as it is the only fully elastomer-lined insert check valve.The valve body is completely isolated from line media which can extend the service life of this series in most appications and makes it an especially economical alternative in application which would othervise require check valve made of expensive alloys..
Characteristic:
-Small in size, light in weight, compact in sturcture, easy in maintenance.-Two torsion springs are added to each of the pair valve plates, which close the plates quickly and automatically.
-The Quick cloth action preventsthe medium from flowing back.
-Short face to face and good rigidity.
-Easy installation, it can be installed on both horizontal and vertival direction pipelines.
-This valve is tighly sealed, without leakage under the water pressure test.
-Safe and reliable in operation, High interference-resistance.
Dimensions:
| Size | A | B | C | D | K | F | G | H | J | E | Weight (kg) | |
| (mm) | (inch) | |||||||||||
| 50 | 2″ | 159 | 101.6 | 84.14 | 66.68 | 52.39 | 120.65 | 19.05 | 28.45 | 47.63 | 53.98 | 2 |
| 65 | 2.5″ | 178 | 120.65 | 98.43 | 79.38 | 52.39 | 139.7 | 19.05 | 36.51 | 58.74 | 53.98 | 2.9 |
| 80 | 3″ | 191 | 133.35 | 115.89 | 92.08 | 52.39 | 152.4 | 19.05 | 41.28 | 69.85 | 53.98 | 3.2 |
| 100 | 4″ | 235 | 171.45 | 142.88 | 117.48 | 61.91 | 190.5 | 19.05 | 53.98 | 87.31 | 63.5 | 6.4 |
| 125 | 5″ | 270 | 193.68 | 171.45 | 144.46 | 65.02 | 215.9 | 22.35 | 67.47 | 112.71 | 66.68 | 7.5 |
| 150 | 6″ | 305 | 222.25 | 200.03 | 171.45 | 77.79 | 241.3 | 22.35 | 80.17 | 141.29 | 79.38 | 10.7 |
| 200 | 8″ | 368 | 269.88 | 254 | 222.25 | 96.84 | 289.45 | 22.35 | 105.57 | 192.09 | 98.43 | 18.5 |
| 250 | 10″ | 429 | 336.55 | 307.98 | 276.23 | 100.01 | 361.95 | 25.4 | 130.18 | 230.19 | 101.6 | 24 |
| 300 | 12″ | 495 | 464 | 365.13 | 327.03 | 128.59 | 431.8 | 25.4 | 158.75 | 274.64 | 130.18 | 41.5 |
| 350 | 14″ | 572 | 447.68 | 396.88 | 358.78 | 177.8 | 476.25 | 28.45 | 171.45 | 306.39 | 180.98 | 63.3 |
| 400 | 16″ | 632 | 511.18 | 450.85 | 409.58 | 158.75 | 539.75 | 28.45 | 196.85 | 355.6 | 161.93 | 73.9 |
| 450 | 18″ | 641 | 546.1 | 508 | 460.37 | 180.97 | 577.85 | 31.75 | 222.25 | 406.14 | 184.15 | 114 |
| 500 | 20″ | 699 | 596.9 | 555.62 | 511.17 | 212.72 | 635 | 31.75 | 247.65 | 469.9 | 215.9 | 165 |
Product detail pictures:
Related Product Guide:
Factory source Disc Plate Wafer Check Valve - BH Series Dual plate wafer check valve – TWS Valve , The product will supply to all over the world, such as: , , ,
By from -
By from -
Related products
-
China Supplier Electric Actuator Butterfly Valv...
Description: GD Series grooved end butterfly valve is a grooved end bubble tight shutoff butterfly valve with outstanding flow characteristics. The rubber seal is molded onto the ductile iron disc, in order to allow for maximum flow potential. It offers economical, efficient, and reliable service for grooved end piping applications. It is easily installed with two grooved end couplings. Typical application: HVAC, filtering system, etc. Dimensions: Size A B D D1 D2 L H E ...
-
Wholesale Gearbox Butterfly Valve - DC Series ...
Description: DC Series flanged eccentric butterfly valve incorporates a positive retained resilient disc seal and either an integral body seat. The valve has three unique attributes: less weight, more strength and lower torque. Characteristic: 1. Eccentric action reduces torque and seat contact during operation extending valve life 2. Suitable for on/off and modulating service. 3. Subject to size and damage, the seat can be repaired in the field and in certain cases, repaired from outside the...
-
PriceList for Soft Seated Gate Valve - EZ Seri...
Description: EZ Series Resilient seated OS&Y gate valve is a wedge gate valve and Rising stem type, and suitable for use with water and neutral liquids (sewage). Material: Parts Material Body Cast iron,Ductile iron Disc Ductilie iron&EPDM Stem SS416,SS420,SS431 Bonnet Cast iron,Ductile iron Stem nut Bronze Pressure test: Nominal pressure PN10 PN16 Test pressure Shell 1.5 Mpa 2.4 Mpa Sealing 1.1 Mpa 1.76 Mpa Operation: 1． Manual actuation In most cases,resi...
-
China New Product Potable Water Butterfly Valve...
UD Series soft sleeve seated butterfly valve is Wafer pattern with flanges ,the face to face is EN558-1 20 series as wafer type. Characteristics: 1.Correcting holes are made on flange according to standard, easy correcting during the installation. 2.Through-out bolt or one-side bolt used. Easy replacing and maintenance. 3.The soft sleeve seat can isolate the body from media. Product operation instruction 1. Pipe flange standards should conform to butterfly valve standards; suggest using weldi...
-
Rapid Delivery for Wafer Butterfly Valve Manufa...
Description: ED Series Wafer butterfly valve is soft sleeve type and can separate the body and fluid medium exactly,. Material of Main Parts: Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Seat Specification: Material Temperature Use Description NBR -23℃ ~ 82℃ Buna-NBR:(Nitrile Butadiene Rubber ) has good tensile st...
-
High reputation Butterfly Valves Ductile Iron -...
Description: DL Series flanged concentric butterfly valve is with centric disc and bonded liner,and have all same common features of other wafer/lug series,these valves are featured by a higher strength of the body and better resistance to pipe pressures as safey factor. Having all same common features of the univisal series, these valves are featured by a higher strength of the body and better resistance to pipe pressures as safety factor. Characteristic: 1. Short Length pattern design 2. V...
