Factory Free sample Awwa C504 Gate Valve - AZ Series Resilient seated NRS gate valve – TWS Valve
Factory Free sample Awwa C504 Gate Valve - AZ Series Resilient seated NRS gate valve – TWS Valve Detail:
Description:
AZ Series Resilient seated NRS gate valve is a wedge gate valve and Non-rising stem type, and suitable for use with water and neutral liquids (sewage) . The non-rising stem design ensures the stem thread is adequately lubricated by the water passing through the valve.
Characteristic:
-On-line replacement of top seal: Easy installation and maintenance.
-Integral rubber-clad disc: The ductile iron frame work is thermal-clad integrally with high performance rubber. Ensuring tight seal and rust prevention.
-Integrated brass nut: By means of special casting process. the brass stem nut is integrated with the disc with secure connection, thus the products is safe and reliable.
-Flat-bottom seat: The sealing surface of the body is flat without hollow, avoiding any dirt deposit.
Application:
Water supply system, water treatment, sewage disposal, food processing, fire protection system, natural gas, liquefied gas system etc.
Dimensions:
| Size mm (inch) | D1 | D2 | D0 | H | L | b | N-Φd | Weight (kg) |
| 65(2.5″) | 139.7(5.5) | 178(7) | 160(6.3) | 256(10.08 | 190.5(7.5) | 17.53(0.69) | 4-19(0.75) | 15 |
| 80(3″) | 152.4(6_) | 190.5(7.5) | 180(7.09) | 275(10.83) | 203.2(8) | 19.05(0.75) | 4-19(0.75) | 20.22 |
| 100(4″) | 190.5(7.5) | 228.6(9) | 200(7.87) | 310(12.2) | 228.6(9) | 23.88(0.94) | 8-19(0.75) | 30.5 |
| 150(6″) | 241.3(9.5) | 279.4(11) | 251(9.88) | 408(16.06) | 266.7(10.5) | 25.4(1) | 8-22(0.88) | 53.75 |
| 200(8″) | 298.5(11.75) | 342.9(13.5) | 286(11.26) | 512(20.16) | 292.1(11.5) | 28.45(1.12) | 8-22(0.88) | 86.33 |
| 250(10″) | 362(14.252) | 406.4(16) | 316(12.441) | 606(23.858) | 330.2(13) | 30.23(1.19) | 12-25.4(1) | 133.33 |
| 300(12″) | 431.8(17) | 482.6(19) | 356(14.06) | 716(28.189) | 355.6(14) | 31.75(1.25) | 12-25.4(1) | 319 |
Product detail pictures:
Related Product Guide:
Factory Free sample Awwa C504 Gate Valve - AZ Series Resilient seated NRS gate valve – TWS Valve , The product will supply to all over the world, such as: , , ,
By from -
By from -
Related products
-
Hot Sale for Handle Butterfly Valve - MD Serie...
Description: MD Series Lug type butterfly valve allows downstream pipelines and equipments online repair, and it can be installed on pipe ends as exhaust valve. Alignment features of lugged body allows easy installation between pipeline flanges. a real installationi cost saving, can be installed in the pipe end. Characteristic: 1. Small in size&light in weight and easy maintenance. It can be mounted wherever needed. 2. Simple, compact structure, quick 90 degree on-off operation 3. Disc ha...
-
Factory source Disc Plate Wafer Check Valve - ...
Description: Material list: No. Part Material AH EH BH MH 1 Body CI DI WCB CF8 CF8M C95400 CI DI WCB CF8 CF8M C95400 WCB CF8 CF8M C95400 2 Seat NBR EPDM VITON etc. DI Covered Rubber NBR EPDM VITON etc. 3 Disc DI C95400 CF8 CF8M DI C95400 CF8 CF8M WCB CF8 CF8M C95400 4 Stem 416/304/316 304/316 WCB CF8 CF8M C95400 5 Spring 316 …… Feature: Fasten Screw: Effectively prenvent the shaft from traveling,prevent valve work from failing and end from leaking. Body: Short face to f...
-
Wholesale Gearbox Butterfly Valve - UD Series ...
Description: UD Series hard seated butterfly valve is Wafer pattern with flanges ,the face to face is EN558-1 20 series as wafer type. Material of Main Parts: Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Characteristics: 1.Correcting holes are made on flange according to standard, easy correcting during the installation...
-
2021 High quality Y Type Strainer - TWS Flange...
Description: TWS Flanged Y Strainer is device for mechanically removing unwanted solids from liquid, gas or steam lines by means of a perforated or wire mesh straining element. They are used in pipelines to protect pumps, meters, control valves, steam traps, regulators and other process equipment. Introductioin: Flanged strainers are main parts of all kinds of pumps, valves in the pipeline. It is suitable for pipeline of norminal pressure<1.6MPa. Mainly used to filter dirt, rust and other ...
-
OEM Factory for Pn16&1.6 Mpa C504 Butterfly...
Description: Comparing to our YD series,flange connection of MD Series wafer butterfly valve is specific,the handle is malleable iron. Working Temperature: •-45℃ to +135℃ for EPDM liner • -12℃ to +82℃ for NBR liner • +10℃ to +150℃ for PTFE liner Material of Main Parts: Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Dimens...
-
Professional China Wafer Type Pinless Backed Se...
Description: DC Series flanged eccentric butterfly valve incorporates a positive retained resilient disc seal and either an integral body seat. The valve has three unique attributes: less weight, more strength and lower torque. Characteristic: 1. Eccentric action reduces torque and seat contact during operation extending valve life 2. Suitable for on/off and modulating service. 3. Subject to size and damage, the seat can be repaired in the field and in certain cases, repaired from outside th...
