Factory Cheap Hot Flange Type Gate Valve - EZ Series Resilient seated NRS gate valve – TWS Valve
Factory Cheap Hot Flange Type Gate Valve - EZ Series Resilient seated NRS gate valve – TWS Valve Detail:
Description:
EZ Series Resilient seated NRS gate valve is a wedge gate valve and Non-rising stem type, and suitable for use with water and neutral liquids (sewage).
Characteristic:
-On-line replacement of top seal: Easy installation and maintenance.
-Integral rubber-clad disc: The ductile iron frame work is thermal-clad integrally with high performance rubber. Ensuring tight seal and rust prevention.
-Integrated brass nut: By means of special casting process. the brass stem nut is integrated with the disc with secure connection, thus the products is safe and reliable.
-Flat-bottom seat: The sealing surface of the body is flat without hollow, avoiding any dirt deposit.
-Whollly-through flow channel: the whole flow channel is through, giving “Zero” pressure loss.
-Dependable top sealing: with multi-O ring structure adopted, the sealing is dependable.
-Epoxy resin coating: the cast is sprayed with epoxy resin coat both inside and outside, and the dics is wholly clad with rubber in accordance with food hygiene requirement, so it is safe and resistant to corrosion.
Application:
Water supply system, water treatment, sewage disposal, food processing, fire protection system, natural gas, liquefied gas system etc.
Dimensions:
| DN | L | D | D1 | b | N-d0 | H | D0 | Weight(kg) | |||||||
| F4 | F5 | 5163 | 10 | 16 | 10 | 16 | 10 | 16 | 10 | 16 | 10 | 16 | |||
| 50(2″) | 150 | 250 | 178 | 165 | 125 | 19 | 4-19 | 249 | 180 | 10 | 11 | ||||
| 65(2.5″) | 170 | 270 | 190 | 185 | 145 | 19 | 4-19 | 274 | 180 | 13 | 14 | ||||
| 80(3″) | 180 | 280 | 203 | 200 | 160 | 18-19 | 8-19 | 310 | 200 | 23 | 24 | ||||
| 100(4″) | 190 | 300 | 229 | 220 | 180 | 18-19 | 8-19 | 338 | 240 | 25 | 26 | ||||
| 125(5″) | 200 | 325 | 254 | 250 | 210 | 18 | 8-19 | 406 | 300 | 33 | 35 | ||||
| 150(6″) | 210 | 350 | 267 | 285 | 240 | 19 | 8-23 | 470 | 300 | 42 | 44 | ||||
| 200(8″) | 230 | 400 | 292 | 340 | 295 | 20 | 8-23 | 12-23 | 560 | 350 | 76 | 80 | |||
| 250(10″) | 250 | 450 | 330 | 395 | 405 | 350 | 355 | 22 | 12-23 | 12-28 | 642 | 350 | 101 | 116 | |
| 300(12″) | 270 | 500 | 356 | 445 | 460 | 400 | 410 | 24 | 22 | 12-23 | 12-28 | 740 | 400 | 136 | 156 |
| 350(14″) | 290 | 550 | 381 | 505 | 520 | 460 | 470 | 25 | 16-23 | 16-25 | 802 | 450 | 200 | 230 | |
| 400(16″) | 310 | 600 | 406 | 565 | 580 | 515 | 525 | 28 | 16-25 | 16-30 | 907 | 450 | 430 | 495 | |
| 450(18″) | 330 | 650 | 432 | 615 | 640 | 565 | 585 | 29 | 20-25 | 20-30 | 997 | 620 | 450 | 518 | |
| 500(20″) | 350 | 700 | 457 | 670 | 715 | 620 | 650 | 31 | 20-25 | 20-34 | 1110 | 620 | 480 | 552 | |
| 600(24″) | 390 | 800 | 508 | 780 | 840 | 725 | 770 | 33 | 20-30 | 20-41 | 1288 | 620 | 530 | 610 | |
Product detail pictures:
Related Product Guide:
Factory Cheap Hot Flange Type Gate Valve - EZ Series Resilient seated NRS gate valve – TWS Valve , The product will supply to all over the world, such as: , , ,
By from -
By from -
Related products
-
Cheap price China Flange Gate Valve - AZ Serie...
Description: AZ Series Resilient seated NRS gate valve is a wedge gate valve and Non-rising stem type, and suitable for use with water and neutral liquids (sewage) . The non-rising stem design ensures the stem thread is adequately lubricated by the water passing through the valve. Characteristic: -On-line replacement of top seal: Easy installation and maintenance. -Integral rubber-clad disc: The ductile iron frame work is thermal-clad integrally with high performance rubber. Ensuring tight se...
-
Hot-selling En 12266-1 Butterfly Valve - UD Se...
UD Series soft sleeve seated butterfly valve is Wafer pattern with flanges ,the face to face is EN558-1 20 series as wafer type. Characteristics: 1.Correcting holes are made on flange according to standard, easy correcting during the installation. 2.Through-out bolt or one-side bolt used. Easy replacing and maintenance. 3.The soft sleeve seat can isolate the body from media. Product operation instruction 1. Pipe flange standards should conform to butterfly valve standards; suggest using weldi...
-
Factory Supply Swing Check Valve - BH Series D...
Description: BH Series Dual plate wafer check valve is the cost-effective backflow protection for piping systems,as it is the only fully elastomer-lined insert check valve.The valve body is completely isolated from line media which can extend the service life of this series in most appications and makes it an especially economical alternative in application which would othervise require check valve made of expensive alloys.. Characteristic: -Small in size, light in weight, compact in sturctur...
-
Chinese Professional Pfa Butterfly Valve - UD ...
UD Series soft sleeve seated butterfly valve is Wafer pattern with flanges ,the face to face is EN558-1 20 series as wafer type. Characteristics: 1.Correcting holes are made on flange according to standard, easy correcting during the installation. 2.Through-out bolt or one-side bolt used. Easy replacing and maintenance. 3.The soft sleeve seat can isolate the body from media. Product operation instruction 1. Pipe flange standards should conform to butterfly valve standards; suggest using weldi...
-
Factory Price Manual Butterfle Valve - FD Seri...
Description: FD Series Wafer butterfly valve with PTFE lined structure, this series resilient seated butterfly valve is designed for corrosive media, especially various kinds of strong acids, such as sulfuric acid and aqua regia. The PTFE material will not pollute media within a pipeline. Characteristic: 1. The butterfly valve comes with two-way installation, zero leakage, corrosion resistance, light weight, small size, low cost and easy installation.2. Tts PTFE clad seat is capable of protec...
-
Best Price for China Wafer Butterfly Valve - U...
Description: UD Series hard seated butterfly valve is Wafer pattern with flanges ,the face to face is EN558-1 20 series as wafer type. Material of Main Parts: Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Characteristics: 1.Correcting holes are made on flange according to standard, easy correcting during the installation...
