China Cheap price Butterfly Valve Food And Beverage - ED Series Wafer butterfly valve – TWS Valve

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

, , ,
China Cheap price Butterfly Valve Food And Beverage - ED Series Wafer butterfly valve – TWS Valve Detail:


Description:

ED Series Wafer butterfly valve is soft sleeve type and can separate the body and fluid medium exactly,.

Material of Main Parts: 

Parts Material
Body CI,DI,WCB,ALB,CF8,CF8M
Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel
Stem SS416,SS420,SS431,17-4PH
Seat NBR,EPDM,Viton,PTFE
Taper Pin SS416,SS420,SS431,17-4PH

Seat Specification:

Material Temperature Use Description
NBR -23℃ ~ 82℃ Buna-NBR:(Nitrile Butadiene Rubber ) has good tensile strength and resistance to abrasion.It is also resistant to hydrocarbon products.It is a good general-service material for use in water,vacuum,acid,salts,alkalines,fats,oils,greases,hydraulic oils and ethylene glycol. Buna-N can not use for acetone,ketones and nitrated or chlorinated hydrocarbons.
Shot time-23℃ ~120℃
EPDM -20 ℃~130℃ General EPDM rubber: is a good general-service synthetic rubber used in hot-water, drinks, milk product systems and those containing ketones, alcohol, nitric ether esters and glycerol. But EPDM can not use for hydrocarbon based oils, minerals or solvents.
Shot time-30℃ ~ 150℃
Viton -10 ℃~ 180℃ Viton is a fluorinated hydrocarbon elastomer with excellent resistance to most hydrocarbon oils and gases and other petroleum-based products. Viton can not use for steam service, hot water over 82℃ or concentrated alkalines.
PTFE -5℃ ~ 110℃ PTFE has good chemical performance stability and surface will be not sticky.At the same time, it has good lubricity property and aging resistance. It is a good material for use in acids, alkalis, oxidant and other corrodents.
(Inner liner EDPM)
PTFE -5℃~90℃
(Inner liner NBR)

Operation:lever,gearbox,electrical actuator,pneumatic actuator.

Characteristics:

1.Stem head design of Double “D” or Square cross:Convenient to connect with various actuators,deliver more torque;

2.Two piece stem square driver:No-space connection applies to any poor conditions;

3.Body without Frame structure:The seat can separate the body and fluid medium exactly,and convenient with pipe flange.

Dimension:

20210927171813


Product detail pictures:

China Cheap price Butterfly Valve Food And Beverage - ED Series Wafer butterfly valve – TWS Valve detail pictures


Related Product Guide:

China Cheap price Butterfly Valve Food And Beverage - ED Series Wafer butterfly valve – TWS Valve , The product will supply to all over the world, such as: , , ,

  • 5 Stars By from -

    5 Stars By from -
    Write your message here and send it to us

    Related products

    • Manufacturer for Cast Iron Gate Valve - EZ Series  Resilient seated NRS gate valve – TWS Valve

      Manufacturer for Cast Iron Gate Valve - EZ Ser...

      Description: EZ Series Resilient seated NRS gate valve is a wedge gate valve and Non-rising stem type, and suitable for use with water and neutral liquids (sewage). Characteristic: -On-line replacement of top seal: Easy installation and maintenance. -Integral rubber-clad disc: The ductile iron frame work is thermal-clad integrally with high performance rubber. Ensuring tight seal and rust prevention. -Integrated brass nut: By means of special casting process. the brass stem nut is integrated ...

    • Wholesale Price China Cooling Water Butterfly Valve - MD Series Wafer butterfly valve – TWS Valve

      Wholesale Price China Cooling Water Butterfly V...

      Description: Comparing to our YD series,flange connection of MD Series wafer butterfly valve is specific,the handle is malleable iron. Working Temperature: •-45℃ to +135℃ for EPDM liner • -12℃ to +82℃ for NBR liner • +10℃ to +150℃ for PTFE liner Material of Main Parts: Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Dimens...

    • Low MOQ for Sea Water Butterfly Valve - UD Series soft sleeve seated butterfly valve – TWS Valve

      Low MOQ for Sea Water Butterfly Valve - UD Ser...

      UD Series soft sleeve seated butterfly valve is Wafer pattern with flanges ,the face to face is EN558-1 20 series as wafer type. Characteristics: 1.Correcting holes are made on flange according to standard, easy correcting during the installation. 2.Through-out bolt or one-side bolt used. Easy replacing and maintenance. 3.The soft sleeve seat can isolate the body from media. Product operation instruction 1. Pipe flange standards should conform to butterfly valve standards; suggest using weldi...

    • OEM manufacturer Ks Standard Gate Valve - WZ Series Metal seated NRS gate valve – TWS Valve

      OEM manufacturer Ks Standard Gate Valve - WZ S...

      Description: WZ Series Metal seated NRS gate valve use a ductile iron gate that houses bronze rings to ensure a watertight seal. The non-rising stem design ensures the stem thread is adequately lubricated by the water passing through the valve. Application: Water supply system, water treatment, sewage disposal, food processing, fire protection system, natural gas, liquefied gas system etc. Dimensions: Type DN(mm) L D D1 b Z-Φd H D0 Weight (kg) NRS 40 165 150 110 18 4-Φ19 257 140 10/11 ...

    • Cheapest Factory Vulcanized Seat Butterfly Valve - MD Series Wafer butterfly valve – TWS Valve

      Cheapest Factory Vulcanized Seat Butterfly Valv...

      Description: Comparing to our YD series,flange connection of MD Series wafer butterfly valve is specific,the handle is malleable iron. Working Temperature: •-45℃ to +135℃ for EPDM liner • -12℃ to +82℃ for NBR liner • +10℃ to +150℃ for PTFE liner Material of Main Parts: Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Dimen...

    • OEM Manufacturer Api 6a Gate Valve -  EZ Series Resilient seated OS&Y gate valve – TWS Valve

      OEM Manufacturer Api 6a Gate Valve - EZ Serie...

      Description: EZ Series Resilient seated OS&Y gate valve is a wedge gate valve and Rising stem type, and suitable for use with water and neutral liquids (sewage). Material: Parts Material Body Cast iron,Ductile iron Disc Ductilie iron&EPDM Stem SS416,SS420,SS431 Bonnet Cast iron,Ductile iron Stem nut Bronze  Pressure test:  Nominal pressure PN10 PN16 Test pressure Shell 1.5 Mpa 2.4 Mpa Sealing 1.1 Mpa 1.76 Mpa Operation: 1. Manual actuation In most cases,resi...