Cheap PriceList for Non Rising Stem Gate Valve - AZ Series Resilient seated OS&Y gate valve – TWS Valve
Cheap PriceList for Non Rising Stem Gate Valve - AZ Series Resilient seated OS&Y gate valve – TWS Valve Detail:
Description:
AZ Series Resilient seated NRS gate valve is a wedge gate valve and Rising stem (Outside Screw and Yoke)type, and suitable for use with water and neutral liquids (sewage) . The OS&Y (Outside Screw and Yoke) gate valve is mainly used in fire protection sprinkler systems. The main difference from a standard NRS (Non Rising Stem) gate valve is that the stem and stem nut are placed outside the valve body. This makes it easy to see if the valve is open or closed, as almost the entire length of the stem is visible when the valve is open, while the stem is no longer visible when the valve is closed. In general this is a requirement in these kinds of systems to ensure a fast visual control of the system status..
Features:
Body:No groove design,prevent from impurities,ensure effective sealing.With epoxy coating inside,conform to potable water requirement.
Disc:Metal frame with rubber lined,ensure valve sealing and conform to potable water requirement.
Stem:Made of high strength materials,ensure gate valve easily controlled.
Stem nut:The conection piece of stem and disc,ensure disc easy operating.
Dimensions:
| Size mm (inch) | D1 | D2 | D0 | H | H1 | L | b | N-Φd | Weight (kg) |
| 65(2.5″) | 139.7(5.5) | 178(7) | 182(7.17) | 126(4.96) | 190.5(7.5) | 190.5(7.5) | 17.53(0.69) | 4-19(0.75) | 25 |
| 80(3″) | 152.4(6_) | 190.5(7.5) | 250(9.84) | 130(5.12) | 203(8) | 203.2(8) | 19.05(0.75) | 4-19(0.75) | 31 |
| 100(4″) | 190.5(7.5) | 228.6(9) | 250(9.84) | 157(6.18) | 228.6(9) | 228.6(9) | 23.88(0.94) | 8-19(0.75) | 48 |
| 150(6″) | 241.3(9.5) | 279.4(11) | 302(11.89) | 225(8.86) | 266.7(10.5) | 266.7(10.5) | 25.4(1) | 8-22(0.88) | 72 |
| 200(8″) | 298.5(11.75) | 342.9(13.5) | 345(13.58) | 285(11.22) | 292(11.5) | 292.1(11.5) | 28.45(1.12) | 8-22(0.88) | 132 |
| 250(10″) | 362(14.252) | 406.4(16) | 408(16.06) | 324(12.760) | 330.2(13) | 330.2(13) | 30.23(1.19) | 12-25.4(1) | 210 |
| 300(12″) | 431.8(17) | 482.6(19) | 483(19.02) | 383(15.08) | 355.6(14) | 355.6(14) | 31.75(1.25) | 12-25.4(1) | 315 |
Product detail pictures:
Related Product Guide:
Cheap PriceList for Non Rising Stem Gate Valve - AZ Series Resilient seated OS&Y gate valve – TWS Valve , The product will supply to all over the world, such as: , , ,
By from -
By from -
Related products
-
Hot Selling for Stainless Steel Manual Valve -...
Description: DC Series flanged eccentric butterfly valve incorporates a positive retained resilient disc seal and either an integral body seat. The valve has three unique attributes: less weight, more strength and lower torque. Characteristic: 1. Eccentric action reduces torque and seat contact during operation extending valve life 2. Suitable for on/off and modulating service. 3. Subject to size and damage, the seat can be repaired in the field and in certain cases, repaired from outside the...
-
Factory wholesale Ansi Check Valve - BH Series...
Description: BH Series Dual plate wafer check valve is the cost-effective backflow protection for piping systems,as it is the only fully elastomer-lined insert check valve.The valve body is completely isolated from line media which can extend the service life of this series in most appications and makes it an especially economical alternative in application which would othervise require check valve made of expensive alloys.. Characteristic: -Small in size, light in weight, compact in sturctur...
-
Lowest Price for Omal Butterfly Valve - UD Ser...
UD Series soft sleeve seated butterfly valve is Wafer pattern with flanges ,the face to face is EN558-1 20 series as wafer type. Characteristics: 1.Correcting holes are made on flange according to standard, easy correcting during the installation. 2.Through-out bolt or one-side bolt used. Easy replacing and maintenance. 3.The soft sleeve seat can isolate the body from media. Product operation instruction 1. Pipe flange standards should conform to butterfly valve standards; suggest using weld...
-
High reputation Butterfly Valves Ductile Iron -...
Description: DL Series flanged concentric butterfly valve is with centric disc and bonded liner,and have all same common features of other wafer/lug series,these valves are featured by a higher strength of the body and better resistance to pipe pressures as safey factor. Having all same common features of the univisal series, these valves are featured by a higher strength of the body and better resistance to pipe pressures as safety factor. Characteristic: 1. Short Length pattern design 2. V...
-
China New Product Demco Valve - BD Series Wafe...
Description: BD Series wafer butterfly valve can be used as a device to cut-off or regulate the flow in various medium pipes. Through selecting different materials of disc and seal seat, as well as the pinless connection between disc and stem,the valve can be applied to worse conditions, such as desulphurization vacuum, sea water desalinization. Characteristic: 1. Small in size&light in weight and easy maintenance. It can be mounted wherever needed.2. Simple, compact structure, quick 90 ...
-
Renewable Design for Flange Valve Pn16 - DL Se...
Description: DL Series flanged concentric butterfly valve is with centric disc and bonded liner,and have all same common features of other wafer/lug series,these valves are featured by a higher strength of the body and better resistance to pipe pressures as safey factor. Having all same common features of the univisal series, these valves are featured by a higher strength of the body and better resistance to pipe pressures as safety factor. Characteristic: 1. Short Length pattern design 2. V...
