Cheap PriceList for Non Rising Stem Gate Valve - AZ Series Resilient seated NRS gate valve – TWS Valve
Cheap PriceList for Non Rising Stem Gate Valve - AZ Series Resilient seated NRS gate valve – TWS Valve Detail:
Description:
AZ Series Resilient seated NRS gate valve is a wedge gate valve and Non-rising stem type, and suitable for use with water and neutral liquids (sewage) . The non-rising stem design ensures the stem thread is adequately lubricated by the water passing through the valve.
Characteristic:
-On-line replacement of top seal: Easy installation and maintenance.
-Integral rubber-clad disc: The ductile iron frame work is thermal-clad integrally with high performance rubber. Ensuring tight seal and rust prevention.
-Integrated brass nut: By means of special casting process. the brass stem nut is integrated with the disc with secure connection, thus the products is safe and reliable.
-Flat-bottom seat: The sealing surface of the body is flat without hollow, avoiding any dirt deposit.
Application:
Water supply system, water treatment, sewage disposal, food processing, fire protection system, natural gas, liquefied gas system etc.
Dimensions:
| Size mm (inch) | D1 | D2 | D0 | H | L | b | N-Φd | Weight (kg) |
| 65(2.5″) | 139.7(5.5) | 178(7) | 160(6.3) | 256(10.08 | 190.5(7.5) | 17.53(0.69) | 4-19(0.75) | 15 |
| 80(3″) | 152.4(6_) | 190.5(7.5) | 180(7.09) | 275(10.83) | 203.2(8) | 19.05(0.75) | 4-19(0.75) | 20.22 |
| 100(4″) | 190.5(7.5) | 228.6(9) | 200(7.87) | 310(12.2) | 228.6(9) | 23.88(0.94) | 8-19(0.75) | 30.5 |
| 150(6″) | 241.3(9.5) | 279.4(11) | 251(9.88) | 408(16.06) | 266.7(10.5) | 25.4(1) | 8-22(0.88) | 53.75 |
| 200(8″) | 298.5(11.75) | 342.9(13.5) | 286(11.26) | 512(20.16) | 292.1(11.5) | 28.45(1.12) | 8-22(0.88) | 86.33 |
| 250(10″) | 362(14.252) | 406.4(16) | 316(12.441) | 606(23.858) | 330.2(13) | 30.23(1.19) | 12-25.4(1) | 133.33 |
| 300(12″) | 431.8(17) | 482.6(19) | 356(14.06) | 716(28.189) | 355.6(14) | 31.75(1.25) | 12-25.4(1) | 319 |
Product detail pictures:
Related Product Guide:
Cheap PriceList for Non Rising Stem Gate Valve - AZ Series Resilient seated NRS gate valve – TWS Valve , The product will supply to all over the world, such as: , , ,
By from -
By from -
Related products
-
Good quality Handwheel Butterfly Valve - GD Se...
Description: GD Series grooved end butterfly valve is a grooved end bubble tight shutoff butterfly valve with outstanding flow characteristics. The rubber seal is molded onto the ductile iron disc, in order to allow for maximum flow potential. It offers economical, efficient, and reliable service for grooved end piping applications. It is easily installed with two grooved end couplings. Typical application: HVAC, filtering system, etc. Dimensions: Size A B D D1 D2 L H E ...
-
Factory made hot-sale Butterfly Valve Gearbox -...
Description: YD Series Wafer butterfly valve ‘s flange connection is universal standard,and the material of handle is aluminium;It can be used as a device to cut-off or regulate the flow in various medium pipes. Through selecting different materials of disc and seal seat, as well as the pinless connection between disc and stem,the valve can be applied to worse conditions, such as desulphurization vacuum, sea water desalinization. Characteristic: 1. Small in size&light in weight and ...
-
OEM Manufacturer Ductile Iron Wafer Check Valve...
Description: BH Series Dual plate wafer check valve is the cost-effective backflow protection for piping systems,as it is the only fully elastomer-lined insert check valve.The valve body is completely isolated from line media which can extend the service life of this series in most appications and makes it an especially economical alternative in application which would othervise require check valve made of expensive alloys.. Characteristic: -Small in size, light in weight, compact in sturctur...
-
Popular Design for Pneumatic Flange Butterfly V...
UD Series soft sleeve seated butterfly valve is Wafer pattern with flanges ,the face to face is EN558-1 20 series as wafer type. Characteristics: 1.Correcting holes are made on flange according to standard, easy correcting during the installation. 2.Through-out bolt or one-side bolt used. Easy replacing and maintenance. 3.The soft sleeve seat can isolate the body from media. Product operation instruction 1. Pipe flange standards should conform to butterfly valve standards; suggest using weldi...
-
Big Discount Ansi Butterfly Valve - GD Series ...
Description: GD Series grooved end butterfly valve is a grooved end bubble tight shutoff butterfly valve with outstanding flow characteristics. The rubber seal is molded onto the ductile iron disc, in order to allow for maximum flow potential. It offers economical, efficient, and reliable service for grooved end piping applications. It is easily installed with two grooved end couplings. Typical application: HVAC, filtering system, etc. Dimensions: Size A B D D1 D2 L H E ...
-
Manufacturer for Air Valve - TWS Air release v...
Description: The composite high-speed air release valve are combined with two parts of high-pressure diaphragm air valve and the low pressure inlet and exhaust valve ,It has both exhaust and intake functions. The high-pressure diaphragm air release valve automatically discharges the small amount of air accumulated in the pipeline when the pipeline is under pressure. The low-pressure intake and exhaust valve can not only discharge the air in the pipe when the empty pipe is filled with water, b...
