Cheap PriceList for China Check Valve Price - AH Series Dual plate wafer check valve – TWS Valve

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

, , ,
Cheap PriceList for China Check Valve Price - AH Series Dual plate wafer check valve – TWS Valve Detail:

Description:

Material list:

No. Part Material
AH      EH BH MH
1 Body CI DI WCB CF8 CF8M C95400 CI DI WCB CF8 CF8M C95400 WCB CF8 CF8M C95400
2 Seat NBR EPDM VITON etc. DI Covered Rubber NBR EPDM VITON etc.
3 Disc DI C95400 CF8 CF8M DI C95400 CF8 CF8M WCB CF8 CF8M C95400
4 Stem 416/304/316 304/316 WCB CF8 CF8M C95400
5 Spring 316 ……

Feature:

Fasten Screw:
Effectively prenvent the shaft from traveling,prevent valve work from failing and end from leaking.
Body:
Short face to face and good rigidity.
Rubber Seat:
Vulcanized on body,tight fit and tight seat with no leakage.
Springs:
Dual springs distribute the load force evenly across each plate,ensuring quick shut off in back flow.
Disc:
Adopting unitized design of dual dics and two torsion springs,the disc closes quikly and removes water-hammer.
Gasket:
It adjusts fit-up gap and assures disc seal performance.

Dimensions:

"

Size D D1 D2 L R t Weight(kg)
(mm) (inch)
50 2″ 105(4.134) 65(2.559) 32.18(1.26) 54(2.12) 29.73(1.17) 25(0.984) 2.8
65 2.5″ 124(4.882) 78(3) 42.31(1.666) 60(2.38) 36.14(1.423) 29.3(1.154) 3
80 3″ 137(5.39) 94(3.7) 66.87(2.633) 67(2.62) 43.42(1.709) 27.7(1.091) 3.8
100 4″ 175(6.89) 117(4.6) 97.68(3.846) 67(2.62) 55.66(2.191) 26.7(1.051) 5.5
125 5″ 187(7.362) 145(5.709) 111.19(4.378) 83(3.25) 67.68(2.665) 38.6(1.52) 7.4
150 6″ 222(8.74) 171(6.732) 127.13(5) 95(3.75) 78.64(3.096) 46.3(1.8) 10.9
200 8″ 279(10.984) 222(8.74) 161.8(6.370) 127(5) 102.5(4.035) 66(2.59) 22.5
250 10″ 340(13.386) 276(10.866) 213.8(8.49) 140(5.5) 126(4.961) 70.7(2.783) 36
300 12″ 410(16.142) 327(12.874) 237.9(9.366) 181(7.12) 154(6.063) 102(4.016) 54
350 14″ 451(17.756) 375(14.764) 312.5(12.303) 184(7.25) 179.9(7.083) 89.2(3.512) 80
400 16″ 514(20.236) 416(16.378) 351(13.819) 191(7.5) 198.4(7.811) 92.5(3.642) 116
450 18″ 549(21.614) 467(18.386) 409.4(16.118) 203(8) 226.2(8.906) 96.2(3.787) 138
500 20″ 606(23.858) 514(20.236) 451.9(17.791) 213(8.374) 248.2(9.72) 102.7(4.043) 175
600 24″ 718(28.268) 616(24.252) 554.7(21.839) 222(8.75) 297.4(11.709) 107.3(4.224) 239
750 30″ 884(34.8) 772(30.39) 685.2(26.976) 305(12) 374(14.724) 150(5.905) 659

Product detail pictures:

Cheap PriceList for China Check Valve Price - AH Series Dual plate wafer check valve – TWS Valve detail pictures


Related Product Guide:

Cheap PriceList for China Check Valve Price - AH Series Dual plate wafer check valve – TWS Valve , The product will supply to all over the world, such as: , , ,

  • 5 Stars By from -

    5 Stars By from -
    Write your message here and send it to us

    Related products

    • Original Factory Butterfly Valve Factory - YD Series Wafer butterfly valve – TWS Valve

      Original Factory Butterfly Valve Factory - YD ...

      Description: YD Series Wafer butterfly valve ‘s flange connection is universal standard,and the material of handle is aluminium;It can be used as a device to cut-off or regulate the flow in various medium pipes. Through selecting different materials of disc and seal seat, as well as the pinless connection between disc and stem,the valve can be applied to worse conditions, such as desulphurization vacuum, sea water desalinization. Characteristic: 1. Small in size&light in weight and ...

    • OEM China Worm Electric Actuator Butterfly Valve - UD Series soft sleeve seated butterfly valve – TWS Valve

      OEM China Worm Electric Actuator Butterfly Valv...

      UD Series soft sleeve seated butterfly valve is Wafer pattern with flanges ,the face to face is EN558-1 20 series as wafer type. Characteristics: 1.Correcting holes are made on flange according to standard, easy correcting during the installation. 2.Through-out bolt or one-side bolt used. Easy replacing and maintenance. 3.The soft sleeve seat can isolate the body from media. Product operation instruction 1. Pipe flange standards should conform to butterfly valve standards; suggest using weldi...

    • Manufacturer for Cast Iron Gate Valve - EZ Series  Resilient seated NRS gate valve – TWS Valve

      Manufacturer for Cast Iron Gate Valve - EZ Ser...

      Description: EZ Series Resilient seated NRS gate valve is a wedge gate valve and Non-rising stem type, and suitable for use with water and neutral liquids (sewage). Characteristic: -On-line replacement of top seal: Easy installation and maintenance. -Integral rubber-clad disc: The ductile iron frame work is thermal-clad integrally with high performance rubber. Ensuring tight seal and rust prevention. -Integrated brass nut: By means of special casting process. the brass stem nut is integrated ...

    • Hot sale Check Valve Price - AH Series Dual plate wafer check valve – TWS Valve

      Hot sale Check Valve Price - AH Series Dual pl...

      Description: Material list: No. Part Material AH      EH BH MH 1 Body CI DI WCB CF8 CF8M C95400 CI DI WCB CF8 CF8M C95400 WCB CF8 CF8M C95400 2 Seat NBR EPDM VITON etc. DI Covered Rubber NBR EPDM VITON etc. 3 Disc DI C95400 CF8 CF8M DI C95400 CF8 CF8M WCB CF8 CF8M C95400 4 Stem 416/304/316 304/316 WCB CF8 CF8M C95400 5 Spring 316 …… Feature: Fasten Screw: Effectively prenvent the shaft from traveling,prevent valve work from failing and end from leaking. Body: Short face to f...

    • 2021 wholesale price Balancing Valve Price - TWS Flanged static balancing valve – TWS Valve

      2021 wholesale price Balancing Valve Price - T...

      Description: TWS Flanged Static balancing valve is a key hydraulic balance product used for precise flow regulating of water pipelines system in HVAC application to ensure static hydraulic balance across whole water system. The series can ensure the actual flow of each terminal equipment and pipeline in line with the design flow in the phase of system initial commisiioning by site commissiong with flow measuring computer. The series are widely used in main pipes, branch pipes and terminal equ...

    • OEM manufacturer Motor Driven Butterfly Valve - MD Series Wafer butterfly valve – TWS Valve

      OEM manufacturer Motor Driven Butterfly Valve -...

      Description: Comparing to our YD series,flange connection of MD Series wafer butterfly valve is specific,the handle is malleable iron. Working Temperature: •-45℃ to +135℃ for EPDM liner • -12℃ to +82℃ for NBR liner • +10℃ to +150℃ for PTFE liner Material of Main Parts: Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Dimens...