BD Series Wafer butterfly valve
Description:
BD Series wafer butterfly valve can be used as a device to cut-off or regulate the flow in various medium pipes. Through selecting different materials of disc and seal seat, as well as the pinless connection between disc and stem,the valve can be applied to worse conditions, such as desulphurization vacuum, sea water desalinization.
Characteristic:
1. Small in size&light in weight and easy maintenance. It can be mounted wherever needed.2. Simple, compact structure, quick 90 degree on-off operation
3. Disc has two-way bearing, perfect seal, without leakage under the pressure test.
4. Flow curve tending to straight-line. Excellent regulation performance.
5. Various kinds of materials, applicable to different media.
6. Strong wash and brush resistance, and can fit to bad working condition.
7. Center plate structure, small torque of open and close.
8. Long service life. Standing the test of ten thousands opening and closing opration.
9. Can be used in cutting off and regulating media.
Typical application:
1. Water works and water resource project
2. Enviroment Protection
3. Public Facilities
4. Power and Public Utilities
5. Building industry
6. Petroleum/ Chemical
7. Steel. Metallurgy
8. Paper make industry
9. Food/Beverage etc
Dimensions:
| Size | A | B | C | D | L | D1 | Φ | K | E | N-M | Φ1 | Φ2 | G | F | f | □wxw | J | X | Weight(kg) | ||
| (mm) | inch | wafer | lug | ||||||||||||||||||
| 50 | 2 | 161 | 80 | 43 | 53 | 28 | 125 | 18 | 65 | 50 | 4-M16 | 7 | 12.6 | 89 | 155 | 13 | 9*9 | ─ | ─ | 2.7 | 4.1 |
| 65 | 2.5 | 175 | 89 | 46 | 64 | 28 | 145 | 18 | 65 | 50 | 4-M16 | 7 | 12.6 | 105 | 179 | 13 | 9*9 | ─ | ─ | 3.5 | 4.5 |
| 80 | 3 | 181 | 95 | 46 | 79 | 28 | 160 | 18 | 65 | 50 | 8-M16 | 7 | 12.6 | 120 | 190 | 13 | 9*9 | ─ | ─ | 3.9 | 5.1 |
| 100 | 4 | 200 | 114 | 52 | 104 | 28 | 180 | 18 | 90 | 70 | 8-M16 | 10 | 15.8 | 148 | 220 | 13 | 11*11 | ─ | ─ | 5.3 | 9.7 |
| 125 | 5 | 213 | 127 | 56 | 123 | 28 | 210 | 18 | 90 | 70 | 8-M16 | 10 | 18.9 | 170 | 254 | 13 | 14*14 | ─ | ─ | 7.6 | 11.8 |
| 150 | 6 | 226 | 139 | 56 | 156 | 28 | 240 | 22 | 90 | 70 | 8-M20 | 10 | 18.9 | 203 | 285 | 13 | 14*14 | ─ | ─ | 8.4 | 15.3 |
| 200 | 8 | 260 | 175 | 60 | 202 | 38 | 295 | 22 | 125 | 102 | 8-M20 | 12 | 22.1 | 255 | 339 | 15 | 17*17 | ─ | ─ | 14.3 | 36.2 |
| 250 | 10 | 292 | 203 | 68 | 250 | 38 | 350 | 22 | 125 | 102 | 12-M20 | 12 | 28.5 | 303 | 406 | 15 | 22*22 | ─ | ─ | 20.7 | 28.9 |
| 300 | 12 | 337 | 242 | 78 | 302 | 38 | 400 | 22 | 125 | 102 | 12-M20 | 12 | 31.6 | 355 | 477 | 20 | ─ | 34.6 | 8 | 35.1 | 43.2 |
| 350 | 14 | 368 | 267 | 78 | 333 | 45 | 460 | 23 | 125 | 102 | 16-M20 | 12 | 31.6 | 429 | 515 | 20 | ─ | 34.6 | 8 | 49.6 | 67.5 |
| 400 | 16 | 400 | 325 | 102 | 390 | 51 | 515 | 28 | 175 | 140 | 16-M24 | 18 | 33.2 | 480 | 579 | 22 | ─ | 36.15 | 10 | 73.2 | 115.2 |
| 450 | 18 | 422 | 345 | 114 | 441 | 51 | 565 | 28 | 175 | 140 | 20-M24 | 18 | 38 | 530 | 627 | 22 | ─ | 40.95 | 10 | 94.8 | 134.4 |
| 500 | 20 | 480 | 378 | 127 | 492 | 57 | 620 | 28 | 210 | 165 | 20-M24 | 23 | 41.1 | 582 | 696 | 22 | ─ | 44.12 | 10 | 153.6 | 242.4 |
| 600 | 24 | 562 | 475 | 154 | 593 | 70 | 725 | 31 | 210 | 165 | 20-M27 | 23 | 50.7 | 682 | 821 | 22 | ─ | 54.65 | 16 | 225.6 | 324 |
Related products
-
UD Series soft sleeve seated butterfly valve
UD Series soft sleeve seated butterfly valve is Wafer pattern with flanges ,the face to face is EN558-1 20 series as wafer type. Characteristics: 1.Correcting holes are made on flange according to standard, easy correcting during the installation. 2.Through-out bolt or one-side bolt used. Easy replacing and maintenance. 3.The soft sleeve seat can isolate the body from media. Product operation instruction 1. Pipe flange standards ...
-
DL Series flanged concentric butterfly valve
Description: DL Series flanged concentric butterfly valve is with centric disc and bonded liner,and have all same common features of other wafer/lug series,these valves are featured by a higher strength of the body and better resistance to pipe pressures as safey factor. Having all same common features of the univisal series. Characteristic: 1. Short Length pattern design 2. Vulcanised rubber lining 3. Low torque operation 4. St...
-
FD Series Wafer butterfly valve
Description: FD Series Wafer butterfly valve with PTFE lined structure, this series resilient seated butterfly valve is designed for corrosive media, especially various kinds of strong acids, such as sulfuric acid and aqua regia. The PTFE material will not pollute media within a pipeline. Characteristic: 1. The butterfly valve comes with two-way installation, zero leakage, corrosion resistance, light weight, small size, low cost ...
-
UD Series hard-seated butterfly valve
Description: UD Series hard seated butterfly valve is Wafer pattern with flanges ,the face to face is EN558-1 20 series as wafer type. Material of Main Parts: Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Characteristics: 1.Correcting holes are made on flang...
-
MD Series Wafer butterfly valve
Description: Comparing to our YD series,flange connection of MD Series wafer butterfly valve is specific,the handle is malleable iron. Working Temperature: •-45℃ to +135℃ for EPDM liner • -12℃ to +82℃ for NBR liner • +10℃ to +150℃ for PTFE liner Material of Main Parts: Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NB...
-
GD Series grooved end butterfly valve
Description: GD Series grooved end butterfly valve is a grooved end bubble tight shutoff butterfly valve with outstanding flow characteristics. The rubber seal is molded onto the ductile iron disc, in order to allow for maximum flow potential. It offers economical, efficient, and reliable service for grooved end piping applications. It is easily installed with two grooved end couplings. Typical application: HVAC, filtering system...
