2021 High quality Y Type Strainer - TWS Flanged Y Strainer According to ANSI B16.10 – TWS Valve

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

, , ,
2021 High quality Y Type Strainer - TWS Flanged Y Strainer According to ANSI B16.10 – TWS Valve Detail:

Description:

Y strainers mechanically remove solids from flowing steam, gases or liquid piping systems with the use of a perforated or wire mesh straining screen, and are used to protect equipment. From a simple low pressure cast iron threaded strainer to a large, high pressure special alloy unit with a custom cap design.

Material list: 

Parts Material
Body Cast iron
Bonnet Cast iron
Filtering net Stainless steel

Feature:

Unlike other types of strainers, a Y-Strainer has the advantage of being able to be installed in either a horizontal or vertical position. Obviously, in both cases, the screening element must be on the “down side” of the strainer body so that the entrapped material can properly collect in it.

Some manufactures reduce the size of the Y -Strainer body to save material and cut cost. Before installing a Y-Strainer, be sure it is large enough to properly handle the flow. A low-priced strainer may be an indication of an undersized unit. 

Dimensions:

"

Size Face to face Dimensions. Dimensions Weight
DN(mm) L(mm) D(mm) H(mm) kg
50 203.2 152.4 206 13.69
65 254 177.8 260 15.89
80 260.4 190.5 273 17.7
100 308.1 228.6 322 29.97
125 398.3 254 410 47.67
150 471.4 279.4 478 65.32
200 549.4 342.9 552 118.54
250 654.1 406.4 658 197.04
300 762 482.6 773 247.08

Why Use a Y Strainer?

In general, Y strainers are critical anywhere clean fluids are required. While clean fluids can help maximize the reliability and lifespan of any mechanical system, they’re especially important with solenoid valves. This is because solenoid valves are very sensitive to dirt and will only function properly with clean liquids or air. If any solids enter the stream, it can disrupt and even damage the entire system. Therefore, a Y strainer is a great complimentary component. In addition to protecting the performance of solenoid valves, they also help safeguard other types of mechanical equipment, including:
Pumps
Turbines
Spray nozzles
Heat exchangers
Condensers
Steam traps
Meters
A simple Y strainer can keep these components, which are some of the most valuable and expensive parts of the pipeline, protected from the presences of pipe scale, rust, sediment or any other kind of extraneous debris. Y strainers are available in a myriad of designs (and connection types) that can accommodate any industry or application.

 


Product detail pictures:

2021 High quality Y Type Strainer - TWS Flanged Y Strainer According to ANSI B16.10 – TWS Valve detail pictures


Related Product Guide:

2021 High quality Y Type Strainer - TWS Flanged Y Strainer According to ANSI B16.10 – TWS Valve , The product will supply to all over the world, such as: , , ,

  • 5 Stars By from -

    5 Stars By from -
    Write your message here and send it to us

    Related products

    • Discount wholesale Aluminium Body Butterfly Valve - UD Series hard-seated butterfly valve – TWS Valve

      Discount wholesale Aluminium Body Butterfly Val...

      Description: UD Series hard seated butterfly valve is Wafer pattern with flanges ,the face to face is EN558-1 20 series as wafer type. Material of Main Parts: Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Characteristics: 1.Correcting holes are made on flange according to standard, easy correcting during the installation...

    • OEM manufacturer Alfa Butterfly Valve - UD Series soft sleeve seated butterfly valve – TWS Valve

      OEM manufacturer Alfa Butterfly Valve - UD Ser...

      UD Series soft sleeve seated butterfly valve is Wafer pattern with flanges ,the face to face is EN558-1 20 series as wafer type. Characteristics: 1.Correcting holes are made on flange according to standard, easy correcting during the installation. 2.Through-out bolt or one-side bolt used. Easy replacing and maintenance. 3.The soft sleeve seat can isolate the body from media. Product operation instruction 1. Pipe flange standards should conform to butterfly valve standards; suggest using weldi...

    • Excellent quality Industrial Gate Valve -  WZ Series Metal seated OS&Y gate valve – TWS Valve

      Excellent quality Industrial Gate Valve - WZ ...

      Description: WZ Series Metal seated OS&Y gate valve use a ductile iron gate that houses bronze rings to ensure a watertight seal. The OS&Y (Outside Screw and Yoke) gate valve is mainly used in fire protection sprinkler systems. The main difference from a standard NRS (Non Rising Stem) gate valve is that the stem and stem nut are placed outside the valve body. This makes it easy to see if the valve is open or closed, as almost the entire length of the stem is visible when the valve is ...

    • Manufacturing Companies for F4/F5 Gate Valve - WZ Series Metal seated NRS gate valve – TWS Valve

      Manufacturing Companies for F4/F5 Gate Valve -...

      Description: WZ Series Metal seated NRS gate valve use a ductile iron gate that houses bronze rings to ensure a watertight seal. The non-rising stem design ensures the stem thread is adequately lubricated by the water passing through the valve. Application: Water supply system, water treatment, sewage disposal, food processing, fire protection system, natural gas, liquefied gas system etc. Dimensions: Type DN(mm) L D D1 b Z-Φd H D0 Weight (kg) NRS 40 165 150 110 18 4-Φ19 257 140 10/11 ...

    • China wholesale Pn16 Check Valve - AH Series Dual plate wafer check valve – TWS Valve

      China wholesale Pn16 Check Valve - AH Series D...

      Description: Material list: No. Part Material AH      EH BH MH 1 Body CI DI WCB CF8 CF8M C95400 CI DI WCB CF8 CF8M C95400 WCB CF8 CF8M C95400 2 Seat NBR EPDM VITON etc. DI Covered Rubber NBR EPDM VITON etc. 3 Disc DI C95400 CF8 CF8M DI C95400 CF8 CF8M WCB CF8 CF8M C95400 4 Stem 416/304/316 304/316 WCB CF8 CF8M C95400 5 Spring 316 …… Feature: Fasten Screw: Effectively prenvent the shaft from traveling,prevent valve work from failing and end from leaking. Body: Short face to f...

    • OEM manufacturer Ks Standard Gate Valve - EZ Series  Resilient seated NRS gate valve – TWS Valve

      OEM manufacturer Ks Standard Gate Valve - EZ S...

      Description: EZ Series Resilient seated NRS gate valve is a wedge gate valve and Non-rising stem type, and suitable for use with water and neutral liquids (sewage). Characteristic: -On-line replacement of top seal: Easy installation and maintenance. -Integral rubber-clad disc: The ductile iron frame work is thermal-clad integrally with high performance rubber. Ensuring tight seal and rust prevention. -Integrated brass nut: By means of special casting process. the brass stem nut is integrated ...