2021 High quality Bs5153 Check Valve - BH Series Dual plate wafer check valve – TWS Valve
2021 High quality Bs5153 Check Valve - BH Series Dual plate wafer check valve – TWS Valve Detail:
Description:
BH Series Dual plate wafer check valve is the cost-effective backflow protection for piping systems,as it is the only fully elastomer-lined insert check valve.The valve body is completely isolated from line media which can extend the service life of this series in most appications and makes it an especially economical alternative in application which would othervise require check valve made of expensive alloys..
Characteristic:
-Small in size, light in weight, compact in sturcture, easy in maintenance.-Two torsion springs are added to each of the pair valve plates, which close the plates quickly and automatically.
-The Quick cloth action preventsthe medium from flowing back.
-Short face to face and good rigidity.
-Easy installation, it can be installed on both horizontal and vertival direction pipelines.
-This valve is tighly sealed, without leakage under the water pressure test.
-Safe and reliable in operation, High interference-resistance.
Dimensions:
| Size | A | B | C | D | K | F | G | H | J | E | Weight (kg) | |
| (mm) | (inch) | |||||||||||
| 50 | 2″ | 159 | 101.6 | 84.14 | 66.68 | 52.39 | 120.65 | 19.05 | 28.45 | 47.63 | 53.98 | 2 |
| 65 | 2.5″ | 178 | 120.65 | 98.43 | 79.38 | 52.39 | 139.7 | 19.05 | 36.51 | 58.74 | 53.98 | 2.9 |
| 80 | 3″ | 191 | 133.35 | 115.89 | 92.08 | 52.39 | 152.4 | 19.05 | 41.28 | 69.85 | 53.98 | 3.2 |
| 100 | 4″ | 235 | 171.45 | 142.88 | 117.48 | 61.91 | 190.5 | 19.05 | 53.98 | 87.31 | 63.5 | 6.4 |
| 125 | 5″ | 270 | 193.68 | 171.45 | 144.46 | 65.02 | 215.9 | 22.35 | 67.47 | 112.71 | 66.68 | 7.5 |
| 150 | 6″ | 305 | 222.25 | 200.03 | 171.45 | 77.79 | 241.3 | 22.35 | 80.17 | 141.29 | 79.38 | 10.7 |
| 200 | 8″ | 368 | 269.88 | 254 | 222.25 | 96.84 | 289.45 | 22.35 | 105.57 | 192.09 | 98.43 | 18.5 |
| 250 | 10″ | 429 | 336.55 | 307.98 | 276.23 | 100.01 | 361.95 | 25.4 | 130.18 | 230.19 | 101.6 | 24 |
| 300 | 12″ | 495 | 464 | 365.13 | 327.03 | 128.59 | 431.8 | 25.4 | 158.75 | 274.64 | 130.18 | 41.5 |
| 350 | 14″ | 572 | 447.68 | 396.88 | 358.78 | 177.8 | 476.25 | 28.45 | 171.45 | 306.39 | 180.98 | 63.3 |
| 400 | 16″ | 632 | 511.18 | 450.85 | 409.58 | 158.75 | 539.75 | 28.45 | 196.85 | 355.6 | 161.93 | 73.9 |
| 450 | 18″ | 641 | 546.1 | 508 | 460.37 | 180.97 | 577.85 | 31.75 | 222.25 | 406.14 | 184.15 | 114 |
| 500 | 20″ | 699 | 596.9 | 555.62 | 511.17 | 212.72 | 635 | 31.75 | 247.65 | 469.9 | 215.9 | 165 |
Product detail pictures:
Related Product Guide:
2021 High quality Bs5153 Check Valve - BH Series Dual plate wafer check valve – TWS Valve , The product will supply to all over the world, such as: , , ,
By from -
By from -
Related products
-
Cheap price Keyston Butterfly Valve - MD Serie...
Description: Comparing to our YD series,flange connection of MD Series wafer butterfly valve is specific,the handle is malleable iron. Working Temperature: •-45℃ to +135℃ for EPDM liner • -12℃ to +82℃ for NBR liner • +10℃ to +150℃ for PTFE liner Material of Main Parts: Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Dimens...
-
Factory Supply Din3202 Butterfly Valve - UD Se...
UD Series soft sleeve seated butterfly valve is Wafer pattern with flanges ,the face to face is EN558-1 20 series as wafer type. Characteristics: 1.Correcting holes are made on flange according to standard, easy correcting during the installation. 2.Through-out bolt or one-side bolt used. Easy replacing and maintenance. 3.The soft sleeve seat can isolate the body from media. Product operation instruction 1. Pipe flange standards should conform to butterfly valve standards; suggest using weldi...
-
Popular Design for Soft Seal Butterfly Valve -...
Description: DL Series flanged concentric butterfly valve is with centric disc and bonded liner,and have all same common features of other wafer/lug series,these valves are featured by a higher strength of the body and better resistance to pipe pressures as safey factor. Having all same common features of the univisal series, these valves are featured by a higher strength of the body and better resistance to pipe pressures as safety factor. Characteristic: 1. Short Length pattern design 2. V...
-
Factory Supply Soft Seal Gate Valve - EZ Serie...
Description: EZ Series Resilient seated NRS gate valve is a wedge gate valve and Non-rising stem type, and suitable for use with water and neutral liquids (sewage). Characteristic: -On-line replacement of top seal: Easy installation and maintenance. -Integral rubber-clad disc: The ductile iron frame work is thermal-clad integrally with high performance rubber. Ensuring tight seal and rust prevention. -Integrated brass nut: By means of special casting process. the brass stem nut is integrated ...
-
High reputation One Piece Stem Butterfly Valve ...
Description: YD Series Wafer butterfly valve ‘s flange connection is universal standard,and the material of handle is aluminium;It can be used as a device to cut-off or regulate the flow in various medium pipes. Through selecting different materials of disc and seal seat, as well as the pinless connection between disc and stem,the valve can be applied to worse conditions, such as desulphurization vacuum, sea water desalinization. Characteristic: 1. Small in size&light in weight and ...
-
100% Original Ductile Iron Swing Check Valve -...
Description: RH Series Rubber seated swing check valve is simple, durable and exhibits improved design features over that of traditional metal-seated swing check valves. The disc and shaft are fully encapsulated with EPDM rubber to create the valve’s only moving part Characteristic: 1. Small in size&light in weight and easy maintenance. It can be mounted wherever needed. 2. Simple, compact structure, quick 90 degree on-off operation 3. Disc has two-way bearing, perfect seal, without leaka...
