2021 China New Design Cast Iron Strainer – TWS Flanged Y Magnet Strainer – TWS Valve

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

, , ,
2021 China New Design Cast Iron Strainer – TWS Flanged Y Magnet Strainer – TWS Valve Detail:

Description:

TWS Flanged Y Magnet Strainer with Magnetic rod for magnetic metal particles segregation.

Quantity of magnet set:
DN50~DN100 with one magnet set;
DN125~DN200 with two magnet sets;
DN250~DN300 with three magnet sets;

Dimensions:

"

Size D d K L b f n-d H
DN50 165 99 125 230 19 2.5 4-18 135
DN65 185 118 145 290 19 2.5 4-18 160
DN80 200 132 160 310 19 2.5 8-18 180
DN100 220 156 180 350 19 2.5 8-18 210
DN150 285 211 240 480 19 2.5 8-22 300
DN200 340 266 295 600 20 2.5 12-22 375
DN300 460 370 410 850 24.5 2.5 12-26 510

Feature:

Unlike other types of strainers, a Y-Strainer has the advantage of being able to be installed in either a horizontal or vertical position. Obviously, in both cases, the screening element must be on the “down side” of the strainer body so that the entrapped material can properly collect in it.

Sizing Your Mesh Filter for a Y strainer

Of course, the Y strainer wouldn’t be able to do its job without the mesh filter that is properly sized. To find the strainer that’s perfect for your project or job, it’s important to understand the basics of mesh and screen sizing. There are two terms used to describe the size of the openings in the strainer through which debris passes. One is micron and the other is mesh size. Though these are two different measurements, they describe the same thing.

What is a Micron?
Standing for micrometer, a micron is a unit of length that’s used to measure tiny particles. For scale, a micrometer is one thousandth of a millimeter or about one 25-thousandths of an inch.

What is Mesh Size?
A strainer’s mesh size indicates how many openings there are in the mesh across one linear inch. Screens are labeled by this size, so a 14-mesh screen means you’ll find 14 openings across one inch. So, a 140-mesh screen means that there are 140 openings per inch. The more openings per inch, the smaller the particles that can pass through. The ratings can range from a size 3 mesh screen with 6,730 microns to a size 400 mesh screen with 37 microns.

 

 


Product detail pictures:

2021 China New Design Cast Iron Strainer – TWS Flanged Y Magnet Strainer – TWS Valve detail pictures


Related Product Guide:

2021 China New Design Cast Iron Strainer – TWS Flanged Y Magnet Strainer – TWS Valve , The product will supply to all over the world, such as: , , ,

  • 5 Stars By from -

    5 Stars By from -
    Write your message here and send it to us

    Related products

    • Discountable price Butterfly Valve Actuator - ED Series Wafer butterfly valve – TWS Valve

      Discountable price Butterfly Valve Actuator - ...

      Description: ED Series Wafer butterfly valve is soft sleeve type and can separate the body and fluid medium exactly,. Material of Main Parts:  Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Seat Specification: Material Temperature Use Description NBR -23℃ ~ 82℃ Buna-NBR:(Nitrile Butadiene Rubber ) has good tensile s...

    • Factory Cheap Hot Butterfly Valve Hard Back - DL Series flanged concentric butterfly valve – TWS Valve

      Factory Cheap Hot Butterfly Valve Hard Back - ...

      Description: DL Series flanged concentric butterfly valve is with centric disc and bonded liner,and have all same common features of other wafer/lug series,these valves are featured by a higher strength of the body and better resistance to pipe pressures as safey factor. Having all same common features of the univisal series, these valves are featured by a higher strength of the body and better resistance to pipe pressures as safety factor.  Characteristic: 1. Short Length pattern design 2. V...

    • Manufacturer for Check Valves - BH Series Dual plate wafer check valve – TWS Valve

      Manufacturer for Check Valves - BH Series Dual...

      Description: BH Series Dual plate wafer check valve is the cost-effective backflow protection for piping systems,as it is the only fully elastomer-lined insert check valve.The valve body is completely isolated from line media which can extend the service life of this series in most appications and makes it an especially economical alternative in application which would othervise require check valve made of expensive alloys.. Characteristic: -Small in size, light in weight, compact in sturctur...

    • PriceList for Soft Seated Gate Valve - EZ Series Resilient seated OS&Y gate valve – TWS Valve

      PriceList for Soft Seated Gate Valve - EZ Seri...

      Description: EZ Series Resilient seated OS&Y gate valve is a wedge gate valve and Rising stem type, and suitable for use with water and neutral liquids (sewage). Material: Parts Material Body Cast iron,Ductile iron Disc Ductilie iron&EPDM Stem SS416,SS420,SS431 Bonnet Cast iron,Ductile iron Stem nut Bronze  Pressure test:  Nominal pressure PN10 PN16 Test pressure Shell 1.5 Mpa 2.4 Mpa Sealing 1.1 Mpa 1.76 Mpa Operation: 1. Manual actuation In most cases,resi...

    • High Quality Lug Type Butterfly Valve - DL Series flanged concentric butterfly valve – TWS Valve

      High Quality Lug Type Butterfly Valve - DL Ser...

      Description: DL Series flanged concentric butterfly valve is with centric disc and bonded liner,and have all same common features of other wafer/lug series,these valves are featured by a higher strength of the body and better resistance to pipe pressures as safey factor. Having all same common features of the univisal series, these valves are featured by a higher strength of the body and better resistance to pipe pressures as safety factor.  Characteristic: 1. Short Length pattern design 2. V...

    • 2021 Good Quality Compressor Air Release Valve - TWS Air release valve – TWS Valve

      2021 Good Quality Compressor Air Release Valve ...

      Description: The composite high-speed air release valve are combined with two parts of high-pressure diaphragm air valve and the low pressure inlet and exhaust valve ,It has both exhaust and intake functions. The high-pressure diaphragm air release valve automatically discharges the small amount of air accumulated in the pipeline when the pipeline is under pressure. The low-pressure intake and exhaust valve can not only discharge the air in the pipe when the empty pipe is filled with water, b...